Chemline F Series Variable Area Flow Meters are ideal for plastic piping. They provide a combination of accurate visual flow rate measurement and clear flow indication from a distance. Optional limit switches allow the units to signal a low or high flow alarm. An optional flow transmitter provides a 4-20 mA signal output. These flow meters must be installed vertically with flow
upward.
Clear Visual Indication
- Large orange float is visible from a distance
- Range indicators slide along dovetail track
Easy Installation and Maintenance
- Just unscrew union nuts and tube slides out of line.
Choice of Four Tube Materials for Many Applications:
Clear PVC - For Water or Chemicals up to 60ºC (140ºF) - High Chemical resistance at
low cost.
Polyamide (PA) - For Water or Air up to 75ºC (167ºF) - High impact strength and
optical clarity.
Polysulfone (PSU) - For Chemicals and Gases up to 100ºC (212ºF) - High impact
strength and good chemical resistance.
PVDF 2 - For Chemicals and Ultrapure fluids up to 110ºC (230ºF) - High impact strength
and excellent chemical resistance.
Ideal for All Types of Plastic Piping
All types of end connections in PVC, CPVC, PP & PVDF
Low Pressure Drop
Good Measuring Accuracy
±3% of indicated value, plus ±1% of full scale.
- Read scale at top (largest diameter) of float
Non Fouling - Float is self supporting in the flow. No guide rod (which can cause the float to jam) is necessary.
Low Cost Visual Indication
|
FC & FS Series
|
| Series: |
FC – Compact – 5" Single Scale
FS – Full Size – 7" Dual Scale1 |
| Materials: |
Tube: Clear PVC, Polyamide (PA),
Polysulfone (PSU), or PVDF2
Float: PVDF
Ends: PVC, CPVC, PP, PVDF, Socket,Threaded, Flanged or Butt
O-Rings: EPDM, Viton |
| Class: |
ANSI 150 Full Face |
| Capacities: |
Up to 220 USGPM
(50,000 litres per hour) |
1USGPM and litres per hour (water) scale is supplied as standard on full size meters.
2Because PVDF is translucent, a magnetic float and limit switches are usually used.
Variable Area Data Page
Installation and Maintenance Manual
