Inverters From Omron Canada

• Intuitive digital operator controls all parameter selections and settings
• Quick Start LEDs for fast setup and troubleshooting
• Standard PID control
• Modbus serial communications standard
• DeviceNet communications unit (optional) allows remote monitoring of Run/Stop status and operating conditions, and making changes to set values
• Fine-tune speed using the potentiometer on the digital operator
• User-selectable open loop vector and V/Hz control methods
• NEMA 4X models meet requiremetns for tough washdown and dust-tight environments
• Single phase units measure 148 H x 170 W x 180 D mm
• Three-phase units measure 260 H x 180 W x 170 D mm
• Integrate a full-featured PLC into 3G3MV inverters with 6 input/4 output points, encoder input, interrupt inputs and pulse outputs; dual port RAM for 200 transfers per second; eliminates point-to-point wiring (order optional 3G3MV-P10CDT3-E)
• 3G3MV AC Inverter Brochure
• 3G3MV-4X AC Inverter Brochure
• 3G3MV SYSDRIVE AC Inverters Brochure
  
  
  

• Easy to use digital operator controls all parameter selections and settings
• Quick Start LEDs for quick setup and troubleshooting
• Fine-tune speed using the potentiometer on the digital operator
• Progammable output frequency, 400 Hz maximum
• Modbus serial communications
• 1-phase and 3-phase 230 VAC units: 5.04 H x 5.04 W x 6.34 D inches
• 3-phase 460 VAC units: 5.04 H x 5.51 W x 6.34 D inches
• 3G3JV Series AC Inverters
  
  

• Wide range of sizes available: 1/2 to 150 HP in 230 VAC and 3/4 to 500 HP in 460 VAC
• V/Hz control for simple applications; open- or closed-loop vector control for adavanced applications
• Time-saving and reliability enhancing built-in functions: PID parameter calculation, energy savings, configurable digital and analog I/O, over-current tripping protection ensures uninterrupted operation, DC bus choke above 30 HP
• Static auto-tune function eliminates the need for motor rotation to determine and set prameters
• High-slip braking function for intermittent braking applications shortens motor stopping time by 1/3 without using braking resistors
• Optional PLC board provides 6 inputs/4 outputs, clock/calendar and encoer interface
• Communication option boards for DeviceNet (3G3RV-PDRT2), Modbus Plus, Ethernet Modbus TCP/IP, LONWorks and Profibus-DP
• 3G3RV brochure
  
  
  

• Ultra-fast processing: execute basic instruction in one clock cycle using 32-bit, 20 MHz RISC processor
• Innovative "5 stage pipeline architecture" allows simultaneous processing of 5 instructions
• 2-line x 16 character alphanumeric Digital Operator with English menus and fault displays
• Built-in motor auto-tuning for easy start-up
• PID control with feedback loop
• Energy savings control reduces power consumption
• 2 sets of motor constants, useful in machine tool applications
• Modbus serial communications standard with optional communications
• Flux Vector capable (with option card)
• Dynamic Braking terminals
• Zero servo mode
• G5+ brochure
  
  
  

• Built-in PID function with feedback loop
• Highly programmable with 116 parameters
• UL listed electronic thermal overload eliminates external devices
• Speed search function restarts a coasting motor without stopping it, after a power loss
• Multi-function inputs (5) and outputs (3) for increased flexibility
• Stall prevention/Current limit prevent overcurrent trips and motor stall
• Critical frequency lockouts (2) to avoid mechanical resonance (as in cooling towers)
• 2-line alphanumeric Digital Operator with English menus and fault displays
• Energy savings control
• Modbus RTU optional communications board controls up to 31 drives
• Quick Start menu access for quick setup and troubleshooting
• 3rd generation IGBT output section
• Built-in braking IGBT (from 2 HP/600 V to 20 HP/600 V)
• Built-in RS-232 port for direct connection to programming tools
• P5+ Inverter Brochure