The FuzyPro 8010 is a 1/8 DIN microprocessor based digital indicator. Available with red or green displays. One latchable relay is fitted as standard, plug-in modules allow two more alarm relays, PV retransmission or transmitter PSU.

Features:

Output Configuration	Up to 3 total, max 3 for Alarms, max 1 for retransmit of PV, max 1 transmitter power supply
Alarm 1, 2 & 3 Types	Process high, process low, direct acting, process high, process low reverse and logical OR
Viewable Values	Process variable, maximum value, minimum value and elapsed time since reset
Legends	ºC/ºF LED, Labels for 27 other common units, mounted behind clear window
Human Interface	3 button operation, 4 digit 13 mm high red or green display, plus setup, alarm, max & min indicators
PC Configuration	Off-line configuration from serial port to dedicated config socket (comms option not required)

Input:

Thermocouple	J, K, R, S, T, B, L, & N
RTD	3 wire PT100 50 per lead maximum (balanced)
DC Linear	0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scalable -1999 to 9999, dec point available
Impedance	>100M for Thermocouple and mV ranges, 47K for V ranges and 4.7 for mA ranges
Accuracy	+/- 0.25% of input scan +/- 1 LSD (T/C CJC better than 0.7ºC)
Sampling	4 per second, 14 bit resolution approximately
Sensor Break Detection	<2 secs (except zero based DC ranges), *high alarms activate (*low for RTD, mA or V)

Outputs & Options:

Alarm 1 Relay	Contact SPDT 2Amp resistive at 240V AC, >500,000 operations, latching or non-latching. Fitted as standard
Alarm 2 & 3 Relays	Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations (optional)
Retransmit Output	0-20/4-20mA to 500 max, 0-10/0-5V into 500 min. Accuracy typically +/- 0.25%
Transmitter Power Supply	20-28V DC (24V nominal), max load 910 (22mA at 20V)
Remote Reset	External reset of latching alarm 1 relay. Volt free or TTL input (Reset = open to close or "0" to "1" transition. 0 = -0.6 to 0.8V, 1 = 2 to 24V)
Communications	2 wire RS485, 1200 to 9600 baud. Modbus or West ASCII (selectable)

Operating & Environmental:

Temperature & RH	0 to 55ºC (-20 to 80ºC storage), 20% to 95% RH non-condensing
Power Supply	100 to 240V 50/60Hz (optional 20 to 55V AC/22 to 65V DC), approx 4 Watts
Front Panel Protection	IEC IP66 (Behind panel protection is IP20)
Approvals and Certification	CE, UL & ULc

	FuzyPro 8010 Brochure
	FuzyPro 8010 Manual