Microtrac Toroidal Conductivity Cooling Tower Controller
|
 The MICROtrac is a microprocessor based feed and bleed toroidal conductivity controller designed to control conductivity and feed inhibitor in cooling tower systems. Featuring innovative toroidal sensor technology, the MICROtrac provides an economical control platform that is not susceptible to sensor fouling and never requires calibration!
Principle Operation
The MICROtrac measures the conductivity of the cooling tower recirculating water via a toroidal conductivity sensor. The controller activates two independent relay outputs based on a bleed and feed mode of operation. When the conductivity measurement goes above the user defined set point, the two relays are activated until the conductivity drops below the set point and the fixed differential value, or until the user programmable limit times for feed or bleed are exceeded.
Operating Benefits
-
No Calibration Required! - MICROtrac's toroidal sensor technology saves you valuable service time and money by eliminating routine calibrations. The MICROtrac toroidal conductivity sensor is factory calibrated for the life of the probe.
-
Reduced Potential for Fouling! - By design, the MICROtrac toroidal conductivity sensor has no exposed electrodes, which means that there is nothing to wear out or foul. When installed according to the manufacturer's instructions, the need for routine sensor removal and cleaning is virtually eliminated - saving you time and money.
-
Two Year Warranty on Controller and Sensor - You can install the MICROtrac controller with confidence, knowing that it is backed by Pulsafeeder with a two year warranty on the controller and probe.
-
Large Range - The MICROtrac conductivity controller has a 0-9,999 µS/cm range, making it ideal for other applications as well, such as rinse, industrial process, wastewater, etc.
-
Simple User Interface - A large LCD display and simple programming via a three-button interface make the unit extremely easy to set up and program. With no calibration required and a fixed differential, all that needs to be done is to program a conductivity set point and, if desired, the limit times for the feed and bleed relays.
-
Easy Installation - Optional pre-wired receptacles for the relays and an optional pre-wired flowswitch make installation a breeze.
Features
-
No calibration required!
-
Easy installation
-
Simple user interface
-
2 Year Warranty
Other Cooling Tower Controllers
|
ACT Series
|
|
|
Controllers from the ACT Series continuously protect cooling systems from the harmful effects
of scaling and corrosion. They are designed using plug-in circuit boards.
These units are accurate and easy to use.
More Information
|
|
|
|
|
MC9200
|
|
|
The MC9200 features the ability to control conductivity and pH, has a mounted
flow assembly, dry contact input & alarm relays, selectable timers, a 2x16 display, and a lockable
viewing window.
More Information
|
|
|
| |
|
|
MC9300/9500
|
|
|
The MC9300/9500 includes the features of the MB9200 but also includes ORP
control, drum level monitors with alarms, taggable timers, multiple 4-20mA inputs and
outputs, and much more.
More Information
|
|
|
|
DCS 900 Series
|
|
|
The DCS900 was designed specifically to control conductivity and feed inhibitor in
cooling tower systems. With three timer modes and optional water meter input, the DCS900
offers the best value in a standalone system.
More Information
|
|
|
|
 |
|
For
More Product Information
|
|
|
|
Or
Call: 800 - 367 - 4180
|
Click
Logo To Visit
|
Click on
the logo to visit Company Product Sites
on the
Process
Controls and Instrumentation web site.
|
If It's
New You'll Find It In Process
News!
|
|
