 |
Process News bi-weekly newsletter is the online version of the
Process Controls And Instrumentation print magazine. |
| Index Add Me Remove Me Products Library Need A Quote Process Controls Web Site |
Week Of October 10, 2006
|
|
|
Temperature Controller - FUZYPRO 6100 1/16 DIN |
|
Current Transducers Sentry 100 Series are used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. Current Transducer Solid Core Sentry 100 Series models are CSA approved and UL listed. Sentry 100 Series comprises a current transformer, range selector, rectifier-filter, and scaling circuit. Each sensor has three basic user selectable ranges. The 0-5 VDC output is available on two 6-32 screw terminals. |
Solid Core Current Transducers with 0-5V output. Sentry 100 Series convert a monitored AC current to a proportional DC voltage of 0 to 5 Volts. |
|
pH/ORP/Conductivity Controllers And Monitors From Myron L Company
|
Since 1957, the Myron L Company has designed and manufactured highly reliable analytical instruments for a wide variety of applications, including pH and conductivity measurement. Thousands of professionals around the world rely every day on the performance of Myron L Company instruments. Demanding uses of Myron L Company instruments range from boiler water testing to ultrapure water control to medical instruments for artificial kidney machines. |
|
The general purpose ultrasonic level switch provides non-contact level detection up to 40' or 12.2m with 3 relays and 1-6 set points. Each relay can be configured on a single set point alarm, two latched set points for automatic fill or empty control or two independent set points for out of bounds alarming. |
EchoSwitch Multi-Point Ultrasonic Level Switch From Flowline |
|
Control Flow From Outside a Pipe - Ultrasonic Flow Switch
The Greyline DFS-II is designed for pump protection, valve control and flow/no-flow alarms. It is ideal for wastewater, slurries, caustics, acids and “difficult” liquids. The watertight NEMA4X switch enclosure includes a 5 amp DPDT control relay with adjustable ON and OFF set points, adjustable time delay, signal strength and relay status LED's and sensitivity adjustment. A sensor mounting kit is included with each switch. The DFS-II is surge protected, the 20 ft. sensor cable can be extended up to 500 ft. and intrinsic safety is optional. |
The Greyline DFS-II Doppler Flow Switch controls flow with a non-contacting ultrasonic sensor mounted on the outside of pipes ½ inch diameter or larger. It installs in minutes. No pipe drilling or cutting is required and there is no maintenance. |
|
Pump Controllers
Use additional contacts to indicate an alarm condition. These alarms provide an audible and visual signal. The audible signal can be muted after which the warning light remains on until the alarm condition is corrected. See Complete Product Information | Request More Information |
Ktech Industrial Products Inc., Pump Controllers are installed to automatically operate a pump to control the level of a liquid in a tank. Pump Controllers are used in conjunction with Ktech Multi-Level Float Switches. Use two contacts to start and stop the pump. A relay circuit switches power to the fractional horsepower pump motor or to the three-phase contactor of a large pump motor. Similarly, the switch contacts can be used to operate solenoid valves. |
|
Unit and Door Heaters from Industrial Mechanical Specialties Limited  Unit Heaters from IMS Canada are heavy duty
industrial type constructed of Sch
40 steel pipe (or Sch 80 on request)
with steel or aluminum fins. Fan guards
are standard equipment. All motors are heavy duty industrial
type and permanently lubricated. The
adjustable louvers and cabinets are
fabricated from 14 gauge steel and
finished in enamel. The cores are of all welded construction and are good for 250 PSI maximum and are hydrostatically tested to 850 PSI. All stainless steel (304 or 316) available. Horizontal or vertical discharge available as well as team, hot water or glygol types. See Complete Product Information | Request More Information |
|
|
This sophisticated microprocessor control combines multiple inputs/output with a “teach function”. The teach function offers the user the ability to teach the control various parameters or set points. These parameters or set points can be saved in memory. LED indicators provide visual confirmation for power and fault condition and outputs. PURPOSE: To control multiple solenoid valves by teaching the control the voltage characteristics of each solenoids being controlled. |
|
|
Certified Calibrations
We also keep records as your back up and will also remind you when calibrations become due.Our staff of qualified, experienced technicians is available to meet your demanding schedule.
Members of our technical team are ASQ trained and certified. |
Industrial Technical Services (ITS) provide certified “on site” and “off site” calibrations and provide “Certificates of Calibration” to keep your equipment compliant and to enable you to maintain proper records to satisfy the various Regulatory bodies. All of the Test equipment used for calibration are certified and traceable to National and International standards. |
|
Intrinsically Safe Relay
When output "B" is completed (contact closed or low resistance), 1 second later LED "B" turns On and the dry output contact is unlatched and de-energized. For pump up applications use normally closed input devices and switch the position of "A" and "B."This device must be located and grounded in a non-hazardous location. |
The ISRL has two independent outputs to the hazardous area and one (dry contact) relay output with a latching function. The outputs can be switches or, when used with a conductive liquid, electrodes. For pump down when output "A" is completed (contact closed or low resistance), 1 second later LED "A" turns On and the dry output contact is energized. | Index Add Me Remove Me Products Library Need A Quote Process Controls Web Site |
Week Of October 10, 2006
|