Process News bi-weekly newsletter is the online version of the
Process Controls And Instrumentation
print magazine.
  Index   Add Me   Remove Me   Products   Library    Need A Quote    Process Controls Web Site
Week Of November 7, 2006

Loop-Powered AC Current Transmitter

Loop-Powered AC Current Transmitter, CR4220 Series, produces 4 - 20 mA DC output current proportional to the input average RMS AC current. Provides long range monitoring of AC sinusoidal currents in an easy to install package.

Loop-Powered AC Current Transmitter Two Element CR4260 Series, produces 4 - 20 mA DC output current proportional to the input average RMS AC current. Provides long range monitoring of AC sinusoidal currents in an easy to install package.

Digital Temperature Transmitter

Digital temperature transmitter, this is the one you need to stock for all your maintenance needs. It can be programmed using your PC and the available software for any one of 7 RTD or 13 thermocouple types or customize the calibration to fit none standard transmitter outputs. The output signal can be inverted and can be programmed to be linear with temperature or linear with resistance or mV input.

Digital temperature transmitter features include a 7mm central hole for easy spring loading of 1/4" tube, insulating barriers between terminals to prevent shorts and a captive cover on programming pins to keep them clean.

See Complete Product Information | Request More Information
   

Kobold Instruments - Measuring and Monitoring Instruments

KOBOLD offers a wide range of flowmeters for both liquid and gas applications including variable area flowmeters, paddle wheel flowmeters, turbine flowmeters, vortex flowmeters, oval gear meters, target flowmeters, magnetic flowmeters and many more. KOBOLD also offers a wide range of flow switches and flow transmitters, pressure instruments include mechanical pressure switches, electronic pressure switches, mechanical pressure gauges, electronic pressure gauges and pressure transmitters, level products include float level switches, optical level switches, ultrasonic level switches, conductive level switches, and many more.

See Complete Product Information | Request More Information

Hayward - Simplex Plastic Basket Strainers

When pipeline system components require protection from dirt and debris and the line can be shut down for basket cleaning, a HAYWARD® All Plastic Simplex Basket Strainer is the ideal choice. Unwanted particles are removed as the process media passes through a perforated strainer basket contained inside the strainer body. The basket traps the unwanted material while allowing the process media to flow freely.

Changing or cleaning the strainer basket is quick and easy. The hand removable, spin-off cover features two angled handles for easy access to the strainer basket. The housing features external cover threads that do not contact the process media and never need cleaning. Venting and draining are made possible by two hand removable, threaded plugs, one on the top of the cover and the other on the housing side.

See Complete Product Information | Request More Information
   

Smar FY302 - Foundation Fieldbus Valve Positioner

The FY302 is from the first generation of Fieldbus devices. It is a control valve positioner for pneumatic valve in a Fieldbus system. The FY302 produces a pressure output as required to position a control valve according to an input received over the Fieldbus network or internal controller.

The Fieldbus technology used in the FY302 enables, an easy interface between the field and the control room and several interesting features that considerably reduce the installation, operation and maintenance costs.

Available in 4-20 mA + Hart, foundation fieldbus, and Profibus versions.

See Complete Product Information | Request More Information
   
Continuous Duty Rocking Piston Diaphram Air Pump

The TUF Pump is a 1/20 horsepower, continuous duty, rocking piston diaphragm air pump for use in pressure or vacuum applications. Its sealed bearings motor requires no lubrication. It can be used as an air supply for bubbler type liquid level controls requiring constant 24/7 operation.

Each pump is able to run non-stop for up to 10,000 hours provided it is used with an Ingram BK-10, BK-20 or BK-30 Bubbler Kit. NOTE: For continuous 24/7 operation, we recommend a yearly pump rebuild using the TUF Pump Rebuild Kit.

See Complete Product Information | Request More Information
       

"Minitwist" - MTFC - Automatic Self-Cleaning Filtration System

“Minitwist” Model MTFC is a fully automatic, self-cleaning filtration system for flows of 0 - 100 US GPM (23M3/H). It removes dirt as fine as 20 micron, and uses a very small amount of water during cleaning process. In filtration mode, flow is from bottomof filter to inside of screen, and out. During cleaning mode, rotating nozzles collect dirt removed from screen by reverse flow, and sends it out through top of filter. Backwash process takes only 5 seconds.

• Fully automatic filtration system
• Self cleaning, using system water only
• Corrosion resistance materials
• Easy to install. Inlet, Outlet and Drain
• It takes only 5 seconds for backwash
• Quick opening clamp for inspection
• Virtually maintenance free


See Complete Product Information | Request More Information
   

Liquid Level Float Switches from Ktech Industrial Products Inc.

Liquid Level Float Switches from Ktech Industrial Products Inc., Are top-mounted with between one and four setpoints. A single point sensor may be used to provide a high or low level alarm contact.

Liquid Level Float Switches are factory-sealed and explosion-proof. They are approved for hazardous locations, Class 1, Division 1, Groups B, C, D. Explosion-proof housings are an optional accessory.

See Complete Product Information | Request More Information
       

BETE Spray Nozzles

Innovation is a BETE hallmark, and we are proud that over 60% of the nozzles we ship have been customized to meet the specific needs of a customer. Our new rapid prototype machine speeds development of customized nozzle solutions. We can test a prototype nozzle in our laboratory hours after it was designed for a customer.

Quality has been an ongoing commitment at BETE since our founding in 1950. In 1993, we were the first spray nozzle company to have its quality management system registered to ISO 9001. In 2003, we became the first spray nozzle company in the world with a quality management system registered to the demanding ISO 9001:2000 standard.

See Complete Product Information | Request More Information
   

Non-Hazardous Cleaning Fluid MultiTherm PSC Plus

MultiTherm PSC PlusCleaning Fluid is designed for use in general maintenance of larger heat transfer fluid systems. MultiTherm PSC Pluscan be used with the Heat Transfer Fluid that is currently in the system or new flush fluid.

It is formulated to breakdown the sludge deposits and resin residue as a result of the detergency. MultiTherm PSC Plus Cleaning Fluid is formulated to be compatible with all MultiTherm Heat Transfer Fluids as well as most others so that small residual amounts left in the system will not cause a problem.

See Complete Product Information | Request More Information

Looking For More Process News

If you missed the last issue of Process News or any other issue you can find the new products presented by clicking on the link below.

You can also visit advertisers web sites to see even more products by clicking on their company logo
.

Process News Previous Issue Products


  Index   Add Me   Remove Me   Products   Library    Need A Quote    Process Controls Web Site
Week Of November 7, 2006