Process News bi-weekly newsletter is the online version of the
Process Controls And Instrumentation
print magazine.
  Index   Add Me   Remove Me   Products   Library    Need A Quote    Process Controls Web Site
Week Of November 21, 2006

Immersion Heaters

Flanged Immersion Heaters are used in large capacity vessels, for high temperature and pressure applications. They are installed by bolting the unit to a matching flange welded to the vessel. Watt densities from 90 Watts/sq inch, Explosion Proof (NEMA 7), Corrosion Resistant (NEMA 4X), General Purpose and Standoff Terminal housings are available. A number of sheath materials like Titanium, Incoloy, Stainless Steel, Steel, and Copper can be used as required for specific applications.

Screw Plug Immersion Heaters are ideal for immersion min liquids, where space and connections are a problem. They are installed in medium to small size containers at pressures up to 3000 PSI. Watt densities from 90 Watts/sq. inch, Explosion Proof (NEMA 7), Corrosion Resistant (NEMA 4X), and General Purpose Terminal housings are available.

Stainless Steel Pressure Transmitters

Stainless Steel Pressure Transmitters Model PX61 detrermine the pressures in liquids and gases and convert these pressures to an electrical signal. The PX61 features compact construction, and integral amplifier, large output signal and extensive medium compatibility. For use with ammonia or greon in refrigeration applications specify the -A for amonia or -F for freon option. The design provides a 1/2% accurate, economical transmitter that can operate accurately over a wide temperature range with corrosion resistance.

The ceramic diaphragm sensing element deflects under pressure. the mechanical deformation is converted to an electrical signal by means of a DMS-bridge. An electronic system converts the DMS-signals to a standard 4-20mA signal.

See Complete Product Information | Request More Information
   

Process Dissolved Oxygen Probes From Sensorex

The Sensorex line of Industrial Dissolved Oxygen probes are fast response galvanic sensors.  They have a large reservoir of electrolyte and available with either mV or 4-20mA outputs. 

Key features include: Large volume electrolyte reservoir for long term continuous deployments.  Sensors are available with either a durable teflon membrane, or a wide span HDPE membrane.   All models are available with an optional integral temperature sensor.  Calibration is easy, requiring only a single point air calibration. 

See Complete Product Information | Request More Information

Micropump Fluid Handling Systems

Micropump offers complete fluid handling system components and assemblies including pump, motor and controller technologies.

Both positive displacement and dynamic pump products are available through Micropump. Magnetic drives in multiple standard and custom designs or the exclusive I-Drive electromagnetic drive technologies are also available to meet your specific application requirements.

In addition to our extensive line of pumps, drives and controllers technologies, we can package our products with other IDEX family companies for complete fluidic assemblies.

See Complete Product Information | Request More Information
   

VortexAC Cabinet Coolers For Electrical Enclosures

Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!

Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C noise level is 93% less than other conventional, vortex type cabinet coolers. When the thermo-statically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!

This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1.5” knockout hole to keep electrical control panels cool, clean and protected.

See Complete Product Information | Request More Information
   
Y Sediment Strainers Chemline YSA Series

The Chemline YSA Series Y Sediment Strainer is a safety filtration device designed to entrap occasional solid impurities in the line. This is to protect equipment with small orifices such as solenoid valves, and prevent damage to pumps or control valves, etc. The easily replaceable filter screen comes in a choice of meshes. The new YSA Series True Union models have greatly increased filtration areas. Pressure drops are lower and less frequent cleaning is required.

See Complete Product Information | Request More Information
       

Primary Fluid Systems Inc.

Specializing in the manufacture of Metering Pump Accessories since 1991.
  • Accudraw, graduated calibration cylinders in PP, PVC and Glass construction.
  • Accu-Pulse pulsation dampeners, available in several sizes and materials of constructuion to meet most chemical applications.
  • Accu-Vent, an automatic degassing valve, designed to vent gases that cause vapor lock in metering pumps.
  • PFS Injection Quills & Corporation Stops, ideal for the injection of chemical into the center stream of the process.
  • Top Valve, back presure and pressure relief valves, in PVC, PP, CPVC, TFE, PVDF, 316 S/S, Hastelloy C and Alloy 20.
See Complete Product Information | Request More Information
   

Ultrasonic Flow Measurement Granucor DK13, DC13 and MT2109

The in-line measurement of bulk solids flow is important for product quality, process efficiency and system safety. The Granucor system provides continuous, real-time flow measurement of dense phase pneumatically conveyed bulk solids or of free falling materials. Its non-intrusive design and patented software can be used to monitor and control the flow in pipes or the flow distribution through pipe networks.

A complete Granucor system is composed of two independent sensors and a correlator/integrator. The DK13 Velocity Sensor and the DC13 Concentration Sensor operate using capacitance technology and are designed for direct installation into process piping. The concentration sensor measures the change in capacitance with material present versus the capacitance of an empty pipe. This change in capacitance is proportional to the material concentration.

See Complete Product Information | Request More Information
       

E3ZM Stainless Steel Compact Photoelectric Sensors From Omron Canada

The new E3ZM, the world's first IP69K compact photoelectric sensor giving it the highest wash down rating for an industrial photoelectric making it perfect were high pressure and temperature spray cleaning is required like meat, poultry and fish to maintain proper standards with the use of detergents or disinfectants.

Wash down of 176ºF water temperature and unique contoured shape and laser markings provide better hygiene.

  • Resists detergents and disinfectants used for in-situ cleaning of food-processing machinery
  • World's smallest photoelectric sensor in food-grade 316L stainless steel case
  • World's first IP69K (DIN 40050-9) sensor housing, suitable for high-temperature, high-pressure jet water spray cleaning applications

See Complete Product Information | Request More Information


Looking For More Process News

If you missed the last issue of Process News or any other issue you can find the new products presented by clicking on the link below.

You can also visit advertisers web sites to see even more products by clicking on their company logo
.

Process News Previous Issue Products


  Index   Add Me   Remove Me   Products   Library    Need A Quote    Process Controls Web Site
Week Of November 21, 2006