![]() |
Process News bi-weekly newsletter is the online version of the
Process Controls And Instrumentation print magazine. |
| Index Add Me Remove Me Products Library Need A Quote Process Controls Web Site |
Week Of February 27, 2007
|
|
Digital Indicator - FUZYPRO 8010 1/8 DIN
|
|
Wind Measuring Systems - Ultrasonic Anemometer The Ultrasonic Anemometer 2D detects the horizontal components of wind speed and direction in two dimensions as well as the virtual temperature. Due to its very short measurement intervals, the Ultrasonic Anemometer is ideal for the inertia-free measurement of gusts and peak values. The sensors and instrument body are automatically heated so that measurements are not affected by ice, snow or rainfall. Both serial and analogue outputs are provided. Click below to see more Wind Measuring Systems. |
|
EW Series Metering Pumps from Walchem
The rugged Polyphenylene Oxide (PPO) enclosure is equipped with a durable clear cover to protect the membrane switches and stroke control of the pump, which are mounted opposite the liquid end. The display utilizes a high temperature LCD that provides extra protection from sunlight in outdoor applications. |
|
Microtrac Toroidal Conductivity Cooling Tower Controller
The MICROtrac measures the conductivity of the cooling tower recirculating water via a toroidal conductivity sensor. The controller activates two independent relay outputs based on a bleed and feed mode of operation. When the conductivity measurement goes above the user defined set point, the two relays are activated until the conductivity drops below the set point and the fixed differential value, or until the user programmable limit times for feed or bleed are exceeded. Other cooling tower controllers shown are ACT Series, MC9200, MC9300/9500 and DCS900. |
|
Smar LD 300 Series Pressure Transmitters Differential Pressure - LD300D and LD300H Series Pressure is applied to high and low sides and differential pressure is measured. High static pressure is supported by LD300H models. Flow - LD300D and LD300H Series The differential pressure is generated by a primary flow element and the square root function supplies the flow measurement. Absolute Pressure - LD300A Series The pressure is measured at the high side of the transmitter and the low side is at zero absolute reference due to a sealed chamber with vacuum applied. Gage Pressure - LD300M Series The pressure is measured at the high side of the transmitter and the low side is open to the atmosphere, providing true local atmospheric reference. Level - LD300L Series The transmitter has a flange mounted unit with a flush diaphragm for direct installation on vessels. Extended diaphragms are also available. See Complete Product Information | Request More Information |
|
"Minitwist" - MTFC - Automatic Self-Cleaning Filtration System Minitwist Model MTFC is a fully automatic, self-cleaning filtration system for flows of 0 - 100 US GPM (23M3/H). It removes dirt as fine as 20 micron, and uses a very small amount of water during cleaning process. In filtration mode, flow is from bottomof filter to inside of screen, and out. During cleaning mode, rotating nozzles collect dirt removed from screen by reverse flow, and sends it out through top of filter. Backwash process takes only 5 seconds. Fully automatic filtration system Self cleaning, using system water only Corrosion resistance materials Easy to install. Inlet, Outlet and Drain It takes only 5 seconds for backwash Quick opening clamp for inspection Virtually maintenance free See Complete Product Information | Request More Information |
|
|
|
Pulsation Dampeners ACCU-PULSE
|
|
Eagle Controls Temperature Panel Meter
|
|
Pump Controllers
Use additional contacts to indicate an alarm condition. These alarms provide an audible and visual signal. The audible signal can be muted after which the warning light remains on until the alarm condition is corrected. See Complete Product Information | Request More Information |
|
High Pressure Water Jetting Pumps from Gardner Denver
The Gardner Denver Inline fluid end has become the industry standard for rugged dependability and ease of maintenance. The Inline pump produces pressures to 36,000 PSI and flows to 140 GPM. Gardner Denver’s Standard L design fluid end produces pressures to 15,000 PSI and flows to 63 GPM. This fluid end can be easily rebuilt in the field using common hand tools and features high-volumetric efficiency, up to 99%. See Complete Product Information | Request More Information |
|
Process Controls And Instrumentation is pleased to introduce the PROCESS CONTROLS STORE. |
The Online Buyers Guide is our Directory Of Products, Services, Manufacturers and Representatives. We have tried to make the directory as easy to use as possible with direct links to Company Product Sites. You will be able to find addresses, and telephone numbers of companies in our Company Directory. |
| Index Add Me Remove Me Products Library Need A Quote Process Controls Web Site |
Week Of February 27, 2007
|