Explosion Proof, Drum Heater

Explosion Proof Drum Heater

  • FM Approved Class 1 Division 2 Groups A, B, C and D
  • FM Apporved Class II Division 2 Groups F and G
  • Exceptional 8" (203mm) coverage area
  • Exceptional durability and flexibility
  • Moisture and chemical resistant
  • NEMA 7 temperature controller
  • Grounded heating element meets NEC 427.23
  • Designed for metal drums

Specifications

  • 8" (203mm) wide band
  • High-limit thermostat designed to keep blanket below NEC article 500 t-rating
    T3: 292ºF (145ºC)

    T4A: 158ºF (70ºC)
  • Power density of 2.5 Watts/in2 (.004Watts/mm2)
  • Patented grounded heating element
  • Heating element is laminated between two layers of 23 mil and two layers of 25 mil fiberglass reinforced silicone rubber
  • Nominal silicone rubber density of 26 oz.yd2 (881 grams/m2) per layer
  • Attached NEMA 7 temperature controller with power cord 6 feet (1.8m) long
  • Blanket leads 6 feet (1.8m) long for NEMA 7 controller, 1 foot (0.3M) without controller
  • Leads from blanket to controller are enclosed in a liquid tight conduit
  • 392ºF (200ºC) maximum exposure temperature on heating surface
  • Moisture and chemical resistant.

For Quick Delivery From Stock Call


For More Product Information
Or Call: 800 - 279 - 9912

Click Logo To Visit

Click on the logo to visit Company Product Sites on the
Process Controls and Instrumentation web site.


If It's New You'll Find It In Process News!


Designed By Panther Marketing & Design