|
New! TEDS-Tag®
 CellMite®
Model 4327 Board with auto identifying display is an embedded digital signal conditioner board from Electro Standards Laboratories that connects directly to a standard strain gage transducer
and simultaneously generates a serial output for direct connection to a PC, a scalable +/-10V analog output for interface to data acquisition systems, and a 16 character auto identifying
display for direct readout viewing. The Model 4327 has on board storage for three calibrated sensors, each with integrated 6-point calibration and independent user specified dispay setup
parameters. When a TEDS-Tag® capable sensor is connected to the unit, that sensor is immediately identified by the Model 4327 and its stored calibration data and display configuration
are automatically loaded. If that sensor is removed and another TEDS-Tag® sensor is connected, then its calibration data and display data are automatically loaded. Unlike other units
in its class, auto sensor identification and auto display identification require no user intervention and prevent field personnel from making costly mistakes due to incorrect sensor calibration
or display setup.
The CellMite® Model 4327 can be fully operated with a computer or simply setup by a computer and then used as a stand alone intelligent digital signal conditioner with auto indentifying
analog and alphanumeric display outputs.
The CellMite® Model 4327 integrates an intelligent 16 character backlit alphanumeric display with a CellMite® Model 4325A. The wide range numerical readout features 6 full digits
of display plus sign indicator and decimal point along with a unit of measure label identifier. The Model 4327 automatically converts between a variety of scientific units including Lbs,
Kg, cm, mm and mV/V and can outpu these to display. The location of the decimal point and unit of measure are setup via software but the computer is not required during operation.
The CellMite® Model 4327 has a multi-drop RS232 / RS485 serial port that allows for connection of mulitple units in a serial network configuration. This compact unit is ideally suited
for in-situ transducer conditioning and distributed process measurements. It provides OEM user and system integrators with an affordable and complete stain gage-to-PC solution with intelligent
display readout that is not found on competitive units.
The Model 4327 features include nonvolatile memory for parameter and calibration storage, ability to select between 3 sotred calibrations, automatic sensor identification using TEDS-Tag®
technology, solid state relay switches, multi-point and mV/V calibration, remote sense excitation, and 24-bit internal resolution with 16-bit analog output.
When used in combination with the Electro Standards Laboratories CellView family point-and-click GUI (Graphical User Interface) software, a turnkey data acquisition system is formed that
can generate Excel compatible data files. The software also supports mulitple units in a serial data network configuration and mix and match operation with the Electro Standards Laboratories
Model 4331-200 two-channel CellMite® LVDT embedded digital signal conditioner boards. This allows the construction of mixed DC excited and AC excited sensor networks under a single software
umbrella
Features:
- Auto Identifying Display
- 2-pt mV/V Calibration
- 6-pt Linearization Calibration
- Scalable +/- 10V Analog Output
- 16-Bit Analog Output
- Direct to PC with RS232 Data
- 24-Bit Resolution
- Mulitple Filter Selections
- Storage for Three Calibrated Transducers
- Remote Sense Excitation
- Addressable for Serial Network
- Tare, Peak, Valley
- Unit Support: Lb, Kg, N, In, Cm, mm, %, mV/V, User-Defined
- TEDS-Tag® Auto Identification
- Power Supplies Internally Isolated
- Din Rail mount available
- Graphical User Interfaces (GUI) and Software Drivers sold separately.
- Select from:
CellView LiteSoftware(Cat. No. 514569)
CellView Multi-Display Software (Cat. No. 514424)
Software Drivers (Cat. No. 514864)
|
