Vortex A/C Coolers

Vortex A/C Coolers

vortex cooler operation, vortex cooler, vortex, cooler, Vortex A/C, Vortex air conditioner, Enclosure air conditioner, ITW Vortec, vortex tube, vortex tubes, cold air gun, spot cooling, dry machining, enclosure coolers, enclosure cooling, air knife, transvectors, air nozzles, drum pump, machine sump, cabinet cooling, cooling vest, industrial cooling, compressed air, personal cooling, parts cleaning, pneumatic conveying, vortex, air conditioning, facility maintenance, pneumatic

Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!

Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C™ noise level is 73% less than other conventional, vortex type cabinet coolers. When the thermostatically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!

This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1.5" knockout hole to keep electrical control panels cool, clean and protected.

When the going gets tough...

Using vortex tube technology, cold air is generated by the Vortex A/C from the compressed air supply and is distributed throughout the enclosure. Since ambient air never enters the cabinet, it's perfect for harsh, dirty environments. In fact, the Vortex A/C features an optional "purge-air" port that, when opened, will provide a constant positive pressure inside the enclosure to purge the cabinet of any contaminated surrounding air. Withstanding extreme temperature conditions, the Vortex A/C will provide reliable cooling operation in environments up to 175°F (79° C).

Compare the Differences

  Vortex A/C Refrigerant-based
Air conditioners
Physical Size (in cubic inches) 160 3200 to 5200
Average Installation Time 15 min. 3 hours
Maximum Ambient Temperature 175°F (79°C) 131°F (55°C)
Operating noise level 62-64dBA 62-64dBA
Optional continuous enclosure purge Yes No
Warranty 10 Years 1 Year

Please contact us for assistance in sizing a Vortex A/C for a specific enclosure, or use the following:

Sizing & Selection Interactive Worksheet

UL Listed models 7015, 7025, and 7035 are the approved Vortex A/C enclosure coolers used in the Vortex A/C systems, models 7715, 7725, and 7735. These systems include the Vortex A/C cooler, a compressed air filter, and a cold air ducting kit. See "Models and Specifications".

vortex cooler operation, vortex cooler, vortex, cooler, Vortex A/C, Vortex air conditioner, Enclosure air conditioner, ITW Vortec, vortex tube, vortex tubes, cold air gun, spot cooling, dry machining, enclosure coolers, enclosure cooling, air knife, transvectors, air nozzles, drum pump, machine sump, cabinet cooling, cooling vest, industrial cooling, compressed air, personal cooling, parts cleaning, pneumatic conveying, vortex, air conditioning, facility maintenance, pneumatic

  Features and Benefits of the
  Vortex A/C Cooler

  Compared to a refrigerant-based air
  conditioner, a Vortex A/C:
  • Is half to 1/3 the cost
  • Is less than 1/10th the size
  • Installs in a fraction of the time
  • Requires no electrical connections
  • Has a warranty that's 10 times
    longer

  Operation of a Vortex Cooler offers
  the most affordable, reliable and
  easiest to install of any thermal
  protection product available for
  electrical enclosures!

  Patent Pending

  • UL listed
  • Approved for NEMA Type 4 and 4X
    enclosures
  • Models for 900, 1500 and 2500
    BTUH of cooling
  • Top or Side Mounting


vortex cooler operation, vortex cooler, vortex, cooler, Vortex A/C, Vortex air conditioner, Enclosure air conditioner, ITW Vortec, vortex tube, vortex tubes, cold air gun, spot cooling, dry machining, enclosure coolers, enclosure cooling, air knife, transvectors, air nozzles, drum pump, machine sump, cabinet cooling, cooling vest, industrial cooling, compressed air, personal cooling, parts cleaning, pneumatic conveying, vortex, air conditioning, facility maintenance, pneumatic


For More Product Information
Or Call: 888 - 754 - 6329

Click Logo To Visit

Click on the logo to visit Company Product Sites on the
Process Controls and Instrumentation web site.


If It's New You'll Find It In Process News!


Designed By Panther Marketing & Design