March 11, 2008

Custom Control Panels, Temperature Control Panels
For a wide variety of applications, manufactured by Heaters Controls And Sensors custom control panels, temperature control panels that are needed to operate in 60ºC environments, to laboratory controllers that are to maintain temperatures within +/- 0.01ºC. These custom control panels, temperature control panels could be made to withstand washdowns with corrosive chemicals with all components on the panel conforming to IP 65 and NEMA 4X. Integration of components for steam booster heaters or recirculation heaters with flow fail safe interlocks are also available.
>> Learn More | >> Request Information

Flue Gas Temperature Transmitters
Our Flue Gas Temperature Transmitters are constructed using the same technique we use in the industrial sensors we supply to power plants and heavy industries. The RTD or thermocouple is embedded in magnesium oxide, packed and sealed within a stainless steel sheath. Because the sensor is so well protected from shock in this construction, long life is ensured, even under the most severe conditions. We incorporate a flange in our standard design in order to make mounting easy. The terminal box containing the transmitter electronics is mounted on a stand-off to minimize heat transfer from the flue gas to the electronics.
>> Learn More | >> Request Information

New ProSeries Product Line, by Blue-White Industries
Introducing the new ProSeries product line designed to meet and exceed the most demanding industrial environments. We've selected only the highest grade material to be used as standard. Each unit is tested prior to shipping to ensure quality, accuracy, and durability.

The products undergo a rigorous washdown test to ensure that it meets the NEMA 4X requirements. The new ProSeries features Peristaltic Metering Pumps, Ultrasonic Flowmeters and Diaphragm Metering Pumps.
>> Learn More | >> Request Information

SUMP-GARD Vertical Centrifugal Pumps
Every wetted component in a Vanton SUMP-GARD® vertical pump, including the heavy-wall shaft sleeve, is offered in PVC, CPVC, PP, PVDF, and other non-metallic materials compatible with the pumped fluid.  This eliminates corrosion and minimizes abrasion, resulting in lower maintenance, longer pump life, and contamination-free products. SG pumps are configured for sumps to 50 ft. (15 m) deep, and handle flows to 1450 gpm (330 m³/hr), heads to 245 ft. (85 m), and temperatures to 275°F (135°C).

SUMP-GARD pumps are ideal for the transfer and treatment of process fluids, plant effluents and industrial or municipal water and waste streams. They are available with vortex pump heads to pass sludges, slurries and stringy materials as well as fluids with solids to 3 inches (75 mm) in diameter.
>> Learn More | >> Request Information

Extruder Rupture Disks
ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI. Offered with several mounting thread styles that are commonly found on plastics processing machinery.
>> Learn More | >> Request Information

Corporation Stops From Primary Fluid Systems Inc.
Corporation Stops have been designed to inject chemicals into the center stream of the flow. An isolation valve allows for ease of maintenance.

Coproration Stops are available in 6 materials of construction. Wetted components have comparable or greater chemical resistance than quill construction material. Corporation Stops are available in standard and custom lengths. Connections are in NPT, Metric or flange.
>> Learn More | >> Request Information

"Minitwist" Automatic Self Cleaning Filtration System
“Minitwist” Model MTFC is a fully automatic, self-cleaning filtration system for flows of 0 - 100 US GPM (23M3/H). It removes dirt as fine as 20 micron, and uses a very small amount of water during cleaning process. In filtration mode, flow is from bottomof filter to inside of screen, and out. During cleaning mode, rotating nozzles collect dirt removed from screen by reverse flow, and sends it out through top of filter. Backwash process takes only 5 seconds.
• Fully automatic filtration system
• Self cleaning, using system water only
• Corrosion resistance materials
>> Learn More | >> Request Information

Dynalco Controls
Dynalco Controls sensors have many uses including speed, direction sensing, flow and power measurement, counting, timing, and synchronization. Our sensors come in a wide variety of lengths, body and pole piece diameters, and output levels. Styles include self-powered magnetic, miniature, dc-powered, and Hall effect. Dynalco also engineers sensors for custom applications.

Dynalco Controls instrumentation includes a full range of tachometers, hourmeters, and Speed Switch, Temperature Indicator and trips, and solid-state digital meters.
>> Learn More | >> Request Information

Differential Pressure Gauges
Sensocon is dedicated to bringing sensing products to the market that utilize advances in technology, design, or manufacturing that result in products superior in value, performance, or features. Sensocon product offering includes the Series A family of digital pressure gauges and controls for measurement of low differential pressure with features such as a transmitter output and the ability to read velocity or flow. Other features of the Series A include universal power, digital calibration, and OptiLink™ programming. For applications that don't have power available or are more cost sensitive, we also offer products such as the S2000 a mechanical pressure gauge.
>> Learn More | >> Request Information

Melt Pressure Gauges
Melt Pressure Gauges from ONEhalf20 are totally mechanical devices that offer ease of installation and maintenance. These melt pressure gauges are ideally suited to processors who require only visual indication of melt pressure.

Melt Pressure Gauges from ONEhalf20 are available in two unique styles. The CTG style features a 6" rigid stem and 30" of flex capillary. The RTG style has only a 6" rigid stem. Other configurations of these two styles are also available.
>> Learn More | >> Request Information

Quality Ultrasonic Leak Detector
This device can be used to locate costly leaks in your compressed air system. Eliminating compressed air leaks can recover a tremendous amount of energy that can be used to operate all types of nozzles, amplifiers and vortex tubes with no added cost! Air savings means free energy. An Ultrasonic Leak Detector (UDC) is typically a hand-held device that is used to locate leaks by aiming it in the direction of a suspected source of an air leak. When a leak is present, then an audible tone can be heard via the use of appropriate head-phones. The proper head phone is very important as well as sensitivity in order to distinguish air leaks from other phenomena which can be miss-interpreted, and even made worse by potential false displays form and LED or other type of display.
>> Learn More | >> Request Information

Chemline SB Series Back Pressure/Relief Valves
SB Series Back Pressure/Relief Valves in solid plastics and stainless steel are now available from Chemline Plastics. They are designed for long maintenance-free life on chemical dosing lines ¼" to 4". They offer reliable opening and adjustable relief pressures of 3 to 150 psi. Advanced hydraulic design offers high flow rates, low hysteresis, and low overpressure to fully open.

All-plastic construction (PVC, PP or PVDF) offers high chemical resistance at
reasonable cost. True union end connections up to 2" eliminate leakage problems common with old-fashioned threaded body valves. The new "Chem-Flare" end connections provide a long term zero leakage solution for sodium hypochlorite services. SB17 is the compact model is for ¼" to ½" tubing, while the SB12 is available for pipe sizes ½" to 4".
>> Learn More | >> Request Information

Ultrasonic Flow Measurement Granucor
A complete Granucor system is composed of two independent sensors and a correlator/ integrator. The DK13 Velocity Sensor and the DC13 Concentration Sensor operate using capacitance technology and are designed for direct installation into process piping. The concentration sensor measures the change in capacitance with material present versus the capacitance of an empty pipe. This change in capacitance is proportional to the material concentration. The velocity sensor uses two measuring points and a technique known as cross-correlation to measure the time it takes for the material to travel between the points. The two-capacitance measurements are output to the MT2109 correlator/integrator, which calculates the mass flow rate.
>> Learn More | >> Request Information