March 25, 2008

FuzyPro Hot Runner Controls
The HRC 15AL control module has dual digital displays providing readouts of both process and setpoint temperatures. Front panel Soft Start, Open Loop (Manual) Control and Closed Loop PID control buttons allow the user to select the function they want, when they want it, which puts you in control of your heating process quickly and easily. The auto-tuning function allows this controller to determine the PID parameters required for the controlled system. This provides precise control for any temperature process.

>> Learn More | >> Request Information

Split And Solid Core Current Transducers
AC Split Core Current Transducers Series SC100 converts a monitored AC current to a proportional DC voltage of 0 to 5 Volts. Used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. All models are CSA approved and UL listed.

Current Transducers Solid Core Sentry 100 Series is used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. Current Transducer Solid Core Sentry 100 Series models are CSA approved and UL listed.

>> Learn More | >> Request Information

pH/ORP Controllers
Walchem's pH/ORP on-line process controllers will improve your treatment performance. With a choice of two models, WDP (Dual pH/ORP) or WPH (Single pH/ORP), finding the optimum control for your application is a snap. Both the WDP and WPH are microprocessor-based with an easy-to-use menu format for programming.  A versatile output configuration allows you to program up to four outputs in a variety of ways with just one controller. The WDP and WPH are available with either on/off mechanical relay outputs or direct pulse proportional control for metering pumps. Installation is as easy as unpacking the unit, mounting it and plugging it in.  UL/CSA/CE certified.

>> Learn More | >> Request Information

Portable Submersible Pumps
JC series submersible pumps are specifically designed with centerline discharges for dewatering jobs in construction, mining, industrial, municipal and utility markets. Click See Complete Product Information for more Portable Submersible Pumps.

• Rugged, durable motor frame
• Capacitor start air filled motors
• Standard 32' power cable
• Wear-resistant wet end parts
  
  >> Learn More | >> Request Information

Quality Ultrasonic Leak Detector
This device can be used to locate costly leaks in your compressed air system. Eliminating compressed air leaks can recover a tremendous amount of energy that can be used to operate all types of nozzles, amplifiers and vortex tubes with no added cost! Air savings means free energy. An Ultrasonic Leak Detector (UDC) is typically a hand-held device that is used to locate leaks by aiming it in the direction of a suspected source of an air leak. When a leak is present, then an audible tone can be heard via the use of appropriate head-phones. The proper head phone is very important as well as sensitivity in order to distinguish air leaks from other phenomena which can be miss-interpreted, and even made worse by potential false displays form and LED or other type of display.

>> Learn More | >> Request Information

Midget Model 277 Levelometer
The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks. Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges. These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale.

>> Learn More | >> Request Information

Extruder Rupture Disks
ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI. Offered with several mounting thread styles that are commonly found on plastics processing machinery.

>> Learn More | >> Request Information

Melt Pressure Transducers
Melt pressure transducers offer high accuracy, repeatability, industry standard functionality, at prices substantially below the competitors.
General purpose melt pressure transducersare our most popular series featuring better than .5% accuracy.

Melt pressure transducers From Skylark incorporate a liquid filled capillary design. This tried and proven design provides an electronic signal which is proportional to the measured pressure, and allows the transducer to operate at process temperatures up to 750ºF or 400ºC. The electronics of each transducer are a Wheatstone Bridge -Bonded Strain Gage design, insuring high accuracy, reliablilty, and repeatability.

>> Learn More | >> Request Information

Altitude Control Valve
The Model 780 Altitude Control Valve, One Way Flow is an automatic control valve designed to control the high water level in reservoirs and tanks without the need for external control devices such as floats, etc. It is a pilot controlled, hydraulically operated, diaphragm actuated globe valve in either the oblique (Y) or angle pattern design. Valve differential pressure powers the diaphragm actuator open or closed.

The lower control chamber is connected through a fixed orifice to the downstream pressure, which serves to cushion the closing of the valve. The upper control chamber, which operates on a three-way control principle, has pressure applied from or pressure vented through the three-way altitude pilot.

>> Learn More | >> Request Information

Industrial Technical Services Catalogue
Smar is the world leader in Fieldbus Technology. Babbitt International has level control solutions. AquaMetrix Inc. has rugged and reliable instrumentation. EESIFLO is a manufacturer of clamp on ultrasonic flowmeters. Precision Digital manufactures a wide range of digital panel and field meters. Alicat Scientific's mass flow devices are NIST traceable. Winters Instruments has industrial instrumentation solutions. TORBAR Averaging Pitot Flow Sensor and the TRIBAR Flow Meter. FuzyPro - Process / Temperature Controllers.

Other manufacturers featured in our catalogue are Transcat, Asco, Protek, YTC, and Protocode.

>> Learn More | >> Request Information

Differential Pressure Gauges
Sensocon is dedicated to bringing sensing products to the market that utilize advances in technology, design, or manufacturing that result in products superior in value, performance, or features. Sensocon product offering includes the Series A family of digital pressure gauges and controls for measurement of low differential pressure with features such as a transmitter output and the ability to read velocity or flow. Other features of the Series A include universal power, digital calibration, and OptiLink™ programming. For applications that don't have power available or are more cost sensitive, we also offer products such as the S2000 a mechanical pressure gauge.

>> Learn More | >> Request Information

Chemline SG Series Gauge Isolators
Chemline SG Series Gauge Isolators allow inexpensive pressure gauges, or any other pressure instrument to be used in corrosive services. The upper chamber (gauge side) is filled with a stable fluid such as glycerine‡. A diaphragm separates it from the lower chamber which receives the media under pressure.

The 1/2" gauge connection allows use of the popular 4" and 4-1/2" diameter gauges. Pressure switches or transmitters may also be installed. Customers can easily fill isolators and install their own gauges.

>> Learn More | >> Request Information

Continuous Duty Rocking Piston Diaphram Air Pump
The TUF Pump is a 1/20 horsepower, continuous duty, rocking piston diaphragm air pump for use in pressure or vacuum applications. Its sealed bearings motor requires no lubrication. It can be used as an air supply for bubbler type liquid level controls requiring constant 24/7 operation. Each pump is able to run non-stop for up to 10,000 hours provided it is used with an Ingram BK-10, BK-20 or BK-30 Bubbler Kit. NOTE: For continuous 24/7 operation, we recommend a yearly pump rebuild using the TUF Pump Rebuild Kit.

>> Learn More | >> Request Information