April 8, 2008

FuzyPro Temperature Controller
The TEMPRETRIEVER is a miniature, battery powered, stand alone temperature recorder. This is an all-in-one compact, portable, easy to use device that will measure and record up to 16,383 measurements. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. See more of our dat loggers by clicking below.

>> Learn More | >> Request Information

Pressure Transmitters Smar LD300 Series
LD300 Series are available in three different technologies: HART^® (LD301), FoundationTM Fieldbus (LD302) and PROFIBUS PA (LD303). These instruments can be configured with Smar software and other manufacturer configuration tools. Local adjustment is available in all LD300 Series. It is possible to configure zero and span, totalization, set point and other control functions using the magnetic screwdriver. Transmitters applications include: differential pressure, flow, absolute pressure, gage pressure and level.

>> Learn More | >> Request Information

Wind Measuring Systems
Our compact Wind Speed Transmitters have the perfect price performance ratio for most commercial and industrial applications. Their built-in heaters make them serviceable in winter conditions and their standard 4-20mA output signal makes them simple to interface to building control panels or industrial chart recorders. See are complete line of wind measuring systems by clicking below.

>> Learn More | >> Request Information

Water Treatment Controller
The Model 1575e uses the latest in microprocessor capability, giving the user a high level of application flexibility. A large illuminated graphics screen, multiple inputs, and very easy setup characterize this new technology. The Model 1575e is UL/CSA/CE approved.

>> Learn More | >> Request Information

CHEM-GARD Horizontal Centrifugal Pumps
The Vanton CHEM-GARD CG design was the first horizontal centrifugal pump engineered from inception to utilize the unique characteristics of thermoplastics. It is not a metal pump made of nonmetallics. Design features include molded plastic components, tangential discharge, wide open seal area and retractable front bearing to simplify maintenance and accommodate all popular mechanical seals. See all our CHEM-GARD Horizontal Centrifugal Pumps by clicking below.

>> Learn More | >> Request Information

Paperless Recording System DataChart 6000
The DataChart 6000 is the most advanced paperless recording system available. It incorporates the latest in measurement, communication, interface and processing technologies to deliver unmatched performance for your data acquisition application. The DataChart 6000 is like no other paperless recorder available. We listened carefully to our product users and developed a device with the unique features they demanded.

>> Learn More | >> Request Information

Top Valve - Back Pressure/Pressure Relief Valves
Back Pressure Valves and Pressure Relief Valves named Top Valve. A new line of diaphragm style, has been introduced by Primary Fluid Systems Inc.. New features include a completely adjustable pressure range of 0-150 PSIG and a built-in air release to reduce priming difficulties with metering pumps. Top Valve Back Pressure Valves and Pressure Relief Valves are available in seven sizes, 1/4" through 2" NPT and eight (8) materials of wetted construction. The seat design of this new line of valves greatly extends the normal life expectancy of the diaphragm.

>> Learn More | >> Request Information

Chemline True Union Valves With ChemFlare End Connections
Chemline True Union valves with ChemFlare end connections offer leak-free
performance and minimum dead volume for ultrapure/sodium hypochlorite
applications.

High integrity in high vibration applications and reliability in sideload applications allow for compact plumbing and a small footprint.

Available in 1/2", 3/4" and 1" tube sizes for direct mounting to Chemline true
union valves, as well as reduced outlet sizes down to 1/4".

>> Learn More | >> Request Information

VortexAC Cabinet Coolers For Electrical Enclosures
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!

Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C noise level is 93% less than other conventional, vortex type cabinet coolers. When the thermo-statically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!

This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1.5” knockout hole to keep electrical control panels cool, clean and protected.
>> Learn More | >> Request Catalog

Fuji Electric PHL Paperless Recorder
The compact PHL Videographic Recorder displays up to 18 channels of data on a brilliant 5.7” TFT color LCD. A wide variety of display modes allows users to view data as trends (horizontally or vertically), bar graphs, analog meters, digital/numeric output, totalized output, event summaries, and more. Switch between display modes quickly and easily with the 8-key front panel. The adjustable-time screen-saver function extends the life of the display and reduces power consumption.
>> Learn More | >> Request Information

Extruder Rupture Disks
Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI. Offered with several mounting thread styles that are commonly found on plastics processing machinery.
>> Learn More | >> Request Information

Melt Pressure Gauges
Melt Pressure Gauges from ONEhalf20 are totally mechanical devices that offer ease of installation and maintenance. These melt pressure gauges are ideally suited to processors who require only visual indication of melt pressure.

Melt Pressure Gauges from ONEhalf20 are available in two unique styles. The CTG style features a 6" rigid stem and 30" of flex capillary. The RTG style has only a 6" rigid stem. Other configurations of these two styles are also available.
>> Learn More | >> Request Information

SonaTech Sonic Measuring Systems
The Ramsey SonaTech sonic level indicator can accurately determine the level of bulk solids or liquids in a given bin, tank or other container. The state-of-the-art SonaTech system provides more penetrating power because it operates in the 5-30 kHz range. That means superior performance in dusty, turbulent or steamy atmospheres

>> Learn More | >> Request Information