June 17, 2008

LevelSonic Ultrasonic Level Sensors
The small, compact LevelSonic Ultrasonic Level Sensors offer non-contact measurement of liquids and solid levels. The transmitter is two-wire loop-powered and uses a simple magnetic key to set up the level range to be measured, as well as selecting the response rate and default currents. On-board and visible operating and fault indication keeps you informed of the operational and fault status at the transmitter. The SONIC is a cost effective, ultrasonic level transmitter for measuring and monitoring liquid levels in open and closed tanks. Its small size makes it supercompact, combining sensor and electronics in one housing. The MINI SONIC with simple push-button calibration has standard 5 feet of interconnection cable. Output 4-20 mA / 20-4 mA, builtin temperature compensation with optional High Level Alarm relay dual pole output 5A/230 Vac and optional RS485 communications with calibration, diagnostics and data logging software.
>> Learn More | >> Request Information

Babbitt Level Switches
The LS 2000 low cost level switch can measure virtually any liquid, dry material or interface (electrically conductive/nonconductive). The LS 6000 is a basic, general-purpose level switch that can measure virtually any liquid, dry material or interface. The LS 7000 has features that make it the most versatile level control on the market today. The LS 7000/2 Dual Point RF Level Switch specifically designed to automatically fill or empty a tank, vessel or sump. LS 8000 is a full-featured sensor with remote electronics and is the perfect choice when it is unsafe or inconvenient to mount the electronics directly to the probe. The LS 8000/2 Multi Point RF Level Switch can be configured for single-point, dual-point or four-point control. The model MLS-4EX Multi-Point Float Level Switch series of level switches are a simple and reliable way to sense fluid levels
>> Learn More | >> Request Information

Digital Temperature Transmitter
Digital temperature transmitter, this is the one you need to stock for all your maintenance needs. It can be programmed using your PC and the available software for any one of 7 RTD or 13 thermocouple types or customize the calibration to fit none standard transmitter outputs. The output signal can be inverted and can be programmed to be linear with temperature or linear with resistance or mV input.

Digital temperature transmitters features include a 7mm central hole for easy spring loading of 1/4" tube, insulating barriers between terminals to prevent shorts and a captive cover on programming pins to keep them clean.
>> Learn More | >> Request Information

Plastic Butterfly Valves
A Better Butterfly Valve: Hayward Butterfly Valves up to 12" are rated at a full 150 psi. Unlike other plastic butterfly valves, Hayward valves are constructed from a one piece body that incorporates fully supported flange bolt holes (the valve has the same number of bolt holds as the matching 150# ANSI flange). This prevents stressing of the mating pipe flanges.

The heavy duty construction of the valve stands up to the most demanding applications. The rock solid integral mounting pad insures that the valve operator will function reliably, whatever operator is used, lever handle, gear box, or actuator.
>> Learn More | >> Request Information

Plastic Basket Strainers
When pipeline system components require protection from dirt and debris and the line can be shut down for basket cleaning, a HAYWARD® All Plastic Simplex Basket Strainer is the ideal choice. Unwanted particles are removed as the process media passes through a perforated strainer basket contained inside the strainer body. The basket traps the unwanted material while allowing the process media to flow freely.

Changing or cleaning the strainer basket is quick and easy. The hand removable, spin-off cover features two angled handles for easy access to the strainer basket. The housing features external cover threads that do not contact the process media and never need cleaning. Venting and draining are made possible by two hand removable, threaded plugs, one on the top of the cover and the other on the housing side.
>> Learn More | >> Request Information

Advanced Humidity/Temperature Data Logger
The HygroLog NT and associated HW4 software comply with FDA CFR part II regarding electronic record keeping. The HygroLog NT can be networked to the purpose of monitoring and capturing data from several locations to a PC.

On-site data logging by the HygroLog NT, combined with the capability of automatically downloading log files to the PC, provides protection against loss of data in the event of a power outage or network failure. Using a docking station, up to 7 probes and two external contacts can be connected to a single HygroLog NT.
>> Learn More | >> Request Information

Testing And Measurement Solutions
For over 40 years Intertechnology Inc., has been Canada's major distributor for Testing and Measurement Solutions. Located in Don Mills, Ontario we are proud to provide quick delivery of the very best technologies available.

Providing Canada With More Than The Product For Over 40 Years
...Means a commitment to serve clients with the best in measuring and testing technologies.
...Means maintaining Engineering, Applications and Service Support for the products we supply.
...Means maintaining up-to-date service and calibration equipment as well as a modern demonstration centre where our clients are invited to learn about stress analysis, related instrumentation and transducers.
...Means gauging services for clients - supplied components or we will manufacture a custom designed transducer to meet your requirements.
>> Learn More | >> Request Information

Midget Model 277 Levelometer
The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks. Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges. These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale.
>> Learn More | >> Request Information

Paperless Recording System DataChart 6000
The DataChart 6000 is the most advanced paperless recording system available. It incorporates the latest in measurement, communication, interface and processing technologies to deliver unmatched performance for your data acquisition application.

The DataChart 6000 is like no other paperless recorder available. We listened carefully to our product users and developed a device with the unique features they demanded.
>> Learn More | >> Request Information

Vortex Tubes
Vortex Tubes are an effective, low cost solution to a wide variety of industrial spot and process cooling needs. With no moving parts, Vortex Tubes spin compressed air to separate the air into cold and hot air streams. While French physicist Georges Ranque is credited with inventing the vortex tube in 1930, ITW Vortec was the first company to develop and apply this phenomenon into practical and effective cooling solutions for industrial use.

Vortex Tubes have a very wide range of application for industrial spot cooling
on machines, assembly lines and processes.
>> Learn More | >> Request Information

Chemline True Union Valves With ChemFlare End Connections
Chemline True Union valves with ChemFlare end connections offer leak-free
performance and minimum dead volume for ultrapure/sodium hypochlorite
applications.

High integrity in high vibration applications and reliability in sideload applications allow for compact plumbing and a small footprint.

Available in 1/2", 3/4" and 1" tube sizes for direct mounting to Chemline true
union valves, as well as reduced outlet sizes down to 1/4".
>> Learn More | >> Request Information

Extruder Rupture Disks
ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI. Offered with several mounting thread styles that are commonly found on plastics processing machinery.

>> Learn More | >> Request Information

Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

>> Learn More | >> Request Information