Precision Controller
The FUZYPRO-TEMP Precision Controller features High Current output Capacity 15 Amps or Higher, LOAD Indication Current indicator for Heater Break, SCR Control 0.5 sec cycle time with High Alarm 2 Pole RELAY, 24 VDC, 120, 208, 240 Volts1 Phase Operation Available, Percentage Power Control 0 to 100% from front PANEL IF Enabled.

The FUZYPRO-TEMP Precision Controller also has Power Supply: AC 85 to 265 Volts 50/60 Hz, Power Consumption: About 4 VA for Controls, Memory Element: EPROM 10 years data retention, Display Accuracy: Within 0.2% of displayed value + 1 digit, Sampling Time: 250 ms Isolation: Input to output Separate Isolation, Dielectric: 1000 V AC 1 Min Isolation Resistance: DC 500 V < 10 M ohm, Operating Temperature: 14-112 Deg F, and a Humidity Range: 0 to 90% RH non consuming.

>> Learn More | >> Request Information
 

Digital Temperature Transmitter
Digital temperature transmitter, this is the one you need to stock for all your maintenance needs. It can be programmed using your PC and the available software for any one of 7 RTD or 13 thermocouple types or customize the calibration to fit none standard transmitter outputs. The output signal can be inverted and can be programmed to be linear with temperature or linear with resistance or mV input.

Digital temperature transmitter features include a 7mm central hole for easy spring loading of 1/4" tube, insulating barriers between terminals to prevent shorts and a captive cover on programming pins to keep them clean.

>> Learn More | >> Request Information
 

Laboratory Drum Pumps From Lutz Pumps
The Lutz B2 is an indispensable aid wherever liquids with a similar viscosity to water have to be filled, transferred, mixed, or metered in small quantities. To or from drums, glass carboys, canisters and other vessels. Even narrow-necked containers such as bottles or pistons present no problem.

The rate of flow can be reduced or cut off as required. The "small but strong" B2 has proven highly successful in laboratories, chemical companies and chemists' shops. Versatile and inexpensive: The ideal starter model.

>> Learn More | >> Request Information
 

Portable Submersible Pumps
JC series submersible pumps are specifically designed with centerline discharges for dewatering jobs in construction, mining, industrial, municipal and utility markets. Click See Complete Product Information for more Portable Submersible Pumps.

• Rugged, durable motor frame
• Capacitor start air filled motors
• Standard 32' power cable
• Wear-resistant wet end parts

>> Learn More | >> Request Information
 

Pressure-Reducing Valve
The Bermad Model 720 Pressure-Reducing Valve is a hydraulically-operated, diaphragm-actuated, control valve that reduces higher upstream pressure to lower constant downstream pressure regardless of fluctuating demand or varying upstream pressure.

• Flow and leakage reduction
• Cavitation damage protection
• Throttling noise reduction
• Burst protection
• System maintenance savings

>> Learn More | >> Request Information
 

Midget Model 277 Levelometer
The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks. Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges. These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale.

>> Learn More | >> Request Information
 

Ramsey Granucor Solids Flow Measurement System
The Ramsey Granucor Solids Flow Measurement System provides continuous, real-time flow measurement of free falling materials and dense phase, pneumatically conveyed bulk solids. It gives you the feedback you need to control your process, which allows you to increase the efficiency of your process, run a safer system, produce higher quality products, and improve your bottom line.

The in-line measurement of bulk solids flow is important for product quality, process efficiency and system safety. The Ramsey Granucor Solids Flow Measurement System from Thermo Fisher Scientific provides continuous, real-time flow measurement of free falling materials or dense phase, pneumatically conveyed bulk solids. Its non-intrusive design and patented software can be used to monitor and control the flow in pipes or the flow distribution through pipe networks.

>> Learn More | >> Request Information
 

High Capacity Ball Valves
The Chemline HC Series High Capacity Ball Valves are the only truly large port 6" ball valve manufactured to date in PVC, Polypropylene and PVDF. Most others offer a 4" valve with ends increased to 6" size. This valve is suitable for sewage, mild slurry or vacuum lines where an unobstructed flow path is required.

- Low Pressure Loss
- No Cavity Between Body & Ball
- Low Stem Torque

>> Learn More | >> Request Information
 

Immersion Heaters
Flanged Immersion Heaters are used in large capacity vessels, for high temperature and pressure applications. They are installed by bolting the unit to a matching flange welded to the vessel. Watt densities from 90 Watts/sq inch, Explosion Proof (NEMA 7), Corrosion Resistant (NEMA 4X), General Purpose and Standoff Terminal housings are available. A number of sheath materials like Titanium, Incoloy, Stainless Steel, Steel, and Copper can be used as required for specific applications. Screw Plug Immersion Heaters are ideal for immersion min liquids, where space and connections are a problem. They are installed in medium to small size containers at pressures up to 3000 PSI.

>> Learn More | >> Request Information
 

Extruder Rupture Disks
ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI. Offered with several mounting thread styles that are commonly found on plastics processing machinery.

>> Learn More | >> Request Information
 

Melt Pressure Transducers
Melt pressure transducers offer high accuracy, repeatability, industry standard functionality, at prices substantially below the competitors.
General purpose melt pressure transducersare our most popular series featuring better than .5% accuracy.

Melt pressure transducers From Skylark incorporate a liquid filled capillary design. This tried and proven design provides an electronic signal which is proportional to the measured pressure, and allows the transducer to operate at process temperatures up to 750ºF or 400ºC. The electronics of each transducer are a Wheatstone Bridge -Bonded Strain Gage design, insuring high accuracy, reliablilty, and repeatability.

>> Learn More | >> Request Information
 

Strain Gauge Instrumentation from Intertechnology Inc.
Micro-Measurements has been a trusted name in the field of strain gauge technology for more than 35 years. A premier supplier of strain gauge instruments, accessories and photoelastic instruments and supplies.

Vishay have been associated with Intertechnology Inc. since their founding. The Measurements Group acquired JP Technologies and BLH, two respected names in strain gauge manufacturing, to support their growing global demand for strain gauges and instrumentation.

>> Learn More | >> Request Information

Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

>> Learn More | >> Request Information