Circular Chart Recorder 10"
The FZY 5000 is a circular chart recorder like no other. Programmable alarm options combined with ease of setup provide the flexibility required for multiple recording applications. The ink style FZY 5000 is the first recorder to self document setup configurations and can operate using standard or competitive charts, another first in the industry. Eliminate multi vendor chart inventories while reducing operator confusion.

>> Learn More
 

Flue Gas Temperature Transmitters
Our Flue Gas Temperature Transmitters are constructed using the same technique we use in the industrial sensors we supply to power plants and heavy industries. The RTD or thermocouple is embedded in magnesium oxide, packed and sealed within a stainless steel sheath.

Because the sensor is so well protected from shock in this construction, long life is ensured, even under the most severe conditions. We incorporate a flange in our standard design in order to make mounting easy. The terminal box containing the transmitter electronics is mounted on a stand-off to minimize heat transfer from the flue gas to the electronics.

>> Learn More
 

Boiler Conductivity, Condensate pH, & Condensate Conductivity Controllers From Lakewood Instruments
Lakewood Instruments manufactures a full line of boiler conductivity, condensate pH, and condensate conductivity controllers. The model 1575e can be used for either boiler conductivity or condensate conductivity control.  The model 267 is a basic condensate conductivity controller.

The model 1520e is our condensate pH controller. The model 2250 is a singel boiler conductivity controller and the model 2255 is a multiple boiler conductivity controller.

>> Learn More
 

End Suction Centrifugal Pump Multi-Duti Advance 3000
The Advance 3000 was designed to meet the demand of low flow, high-pressure applications, while utilizing the compatibility of Noryl wetted parts. The enclosed impeller design ensures long life and durability. When used with the patented Impenatra Seal, the fluid does not contact any metal parts. This allows it to properly handle many applications at a fraction of the cost of exotic alloys. The Advance 3000 has multiple drain locations, allowing for several discharge orientations.

The Advance 3000 is a close coupled, unit end suction centrifugal pump line which is molded in Noryl. It's high efficiency design makes it suitable for medium flows (to-60 GPM) and higher heads (up to 160' TDH).

>> Learn More
 

Sprayvector Air/Liquid Spray Nozzles From Pelmar Engineering
When you need ultra-fine droplet-sized sprays for evaporative cooling, moisturization, atomization and humidification, Sprayvectors are the answer. Using compressed air, these liquid atomizing devices create micron and sub-micron sized spray droplets for greater surface coverage than conventional nozzles.

Superior to hydraulic or piezoelectric nozzles, Sprayvectors accelerate air-liquid interaction and produce defined spray patterns that can be widely diffused or highly directed. These unique nozzles introduce low pressure (2-20 PSIG) liquids into large internal passages to eliminate clogging.

>> Learn More
 

Paperless Recording System DataChart 6000
The DataChart 6000 is the most advanced paperless recording system available. It incorporates the latest in measurement, communication, interface and processing technologies to deliver unmatched performance for your data acquisition application.

The DataChart 6000 is like no other paperless recorder available. We listened carefully to our product users and developed a device with the unique features they demanded.

>> Learn More
 

Ultrasonic Level & Flow Monitor
The Greyline SLT32 Level & Flow Monitor features a non-contacting
ultrasonic sensor and a simple, built-in 3-key calibration system. It can be
used as a level transmitter for tank inventory applications with continuous
display and control, level controller for pump stations and as an open
channel flow monitor with display, totalizer and 4-20mA output.

Standard features include a non-contacting ultrasonic sensor rated for
ranges up to 10 m (15 m optional), NEMA4X electronics enclosure, two
digital displays, isolated 4-20mA output, three control relays programmable
for pump control, pump alternation, level alarms and/or flow proportionate pulse. Options include intrinsically safe sensors, additional control relays and a built-in in 50,000 point data logger.

>> Learn More
 

Pulsation Dampeners ACCU-PULSE
Developed to remove pulsating flows from positive displacement pumps.

• increase system efficiency and pump life
• decrease maintenance and costs
• protect pipes, meters, valves and instrumentation from pulsation and vibration
• ensure meter accuracy, longevity and repeatabilit

>> Learn More
 

Precision Controller
The FUZYPRO-TEMP Precision Controller features High Current output Capacity 15 Amps or Higher, LOAD Indication Current indicator for Heater Break, SCR Control 0.5 sec cycle time with High Alarm 2 Pole RELAY, 24 VDC, 120, 208, 240 Volts1 Phase Operation Available, Percentage Power Control 0 to 100% from front PANEL IF Enabled.

>> Learn More
 

Hayward Simplex Basket Strainers
Simplex pipeline strainers remove damage causing particulate matter from the process media, protecting system components such as flow meters, pumps, and spray nozzles. The particulate matter is captured in the strainer basket. The line is then temporarily shut down and the basket removed for cleaning or replacement.

When pipeline system components require protection from dirt and debris and the line can be shut down for basket cleaning, a Hayward All Plastic Simplex Basket Strainer is the ideal choice. Unwanted particles are removed as the process media passes through a perforated strainer basket contained inside the strainer body. The basket traps the unwanted material while allowing the process media to flow freely.

>> Learn More
 

Melt Pressure Gauges
Melt Pressure Gauges from ONEhalf20 are totally mechanical devices that offer ease of installation and maintenance. These melt pressure gauges are ideally suited to processors who require only visual indication of melt pressure.

Melt Pressure Gauges from ONEhalf20 are available in two unique styles. The CTG style features a 6" rigid stem and 30" of flex capillary. The RTG style has only a 6" rigid stem. Other configurations of these two styles are also available.

>> Learn More
 

Extruder Rupture Disks
Extruder Rupture Disks are designed for reliable emergency relief of excess pressure since they instantaneously rupture at a specific predetermined pressure range.

Skylark Controls model CBP Extruder Rupture Disk is designed specifically for use in plastic extruders. Each assembly consists of a stainless steel body and rupture disk. A rupture disk may be specified for primary relief in applications where pressure buildup can occur so rapidly that the response time of a relief valve is inadequate, such as in a polymerization reaction vessel.

>> Learn More
  

Strain Gauge Instrumentation from Intertechnology Inc.
Micro-Measurements has been a trusted name in the field of strain gauge technology for more than 35 years. A premier supplier of strain gauge instruments, accessories and photoelastic instruments and supplies.

Vishay have been associated with Intertechnology Inc. since their founding. The Measurements Group acquired JP Technologies and BLH, two respected names in strain gauge manufacturing, to support their growing global demand for strain gauges and instrumentation.

>> Learn More

Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

>> Learn More