Celesco Cable Extension Position Transducers

The PT9232 delivers position feedback via RS232 serial communication to
your data acquisition or controller system. The PT9232 sends a raw 16-bit
count from 0000H to FFFFH. Additionally this device can be set to continuously
send data or send data only when polled.

As the internal position sensing element is a precision potentiometer, this
transducer maintains current accurate position even during power loss and
does not need to be reset to a "home" position.

• RS232 Data Communication
• Ranges: 0-75 to 0-550 inches
• Industrial Grade

Download Brochure

Celesco PT101 Cable Extension Position Transducer is available with full-scale
measurement ranges from 2 to 100 inches, providing a voltage feedback signal that is
linearly proportional to the position of a traveling stainless steel extension cable.

Celesco PT101 Cable Extension Position Transducer has been applied to literally
thousands of applications, including automotive suspension testing, saw-blade depth,
valve stem opening and aircraft structural testing.

Celesco PT101 Cable Extension Position Transducer works without perfect parallel
alignment and when its stainless steel cable is retracted, its height is less than 5".

• Short to Medium Range
• Precision Potentiometric Output
• Ranges from 0-2 to -100 inches
  

Industrial Cable Extension Transducers Celesco Model PT8101, using a high
cycle plastic-hybrid potentiometer, operates with any basic meter or programmable
controller in factories and harsh environments requiring linear position measurements
in ranges up to 60 inches.

• Short to Medium Range / Industrial Grade
• Precision Potentiometric Output
• Full Stroke Range from 2 to 60 inches