Paco’s
general service pumps are all designed with advanced features
to yield the proven benefits of low life cycle cost, low
installation cost, low operating cost, and low maintenance
cost.
Utilizing
design features such as double volutes, suction straighteners,
and Francis vaned impellers throughout these product lines
increases efficiency over all of the operating ranges, reduces
radial loading, improves NPSH(R) characteristics, and provides
minimal shock to allow the system to operate effectively,
efficiently, and smoothly.
LC
General Service Pumps
PACO type LC, single stage, end suction centrifugal pumps
are designed and built for compactness, high performance,
durability, and versatility of application.
The
PACO close coupled design features a short shaft design
for minimum overhang and minimum shaft deflection. All models
may be mounted vertically or horizontally, with discharge
connections available in several positions.
PACO
type LC pumps emphasize standardization of parts and maximum
interchangeability permitting the customer a minimum of
stock parts and flexibility for future modification. The
back pull out feature allows maintenance without disconnecting
system piping.
- Sizes
to 8"
- Flows
to 4000 GPM
- Heads
to 400 ft.
- Horsepower
to 125 HP
Download
Brochure
LCV
General Service Pumps
PACO type LCV Vertically Mounted, single stage, end suction
centrifugal pumps are designed and built for compactness,
high performance, durability, and versatility of application.
The
PACO LCV features a short shaft design for minimum overhang
and minimum shaft deflection. All models provided with suction
elbows in a variety of sizes and lengths and include separate
mounting stands. Discharge connections are available in
several positions.
PACO
type LCV pumps emphasize standardization of parts and maximum
interchangeability permitting the customer a minimum of
stock parts and flexibility for future modification. The
back pull out feature allows maintenance without disconnecting
the system piping.
- Sizes
to 8"
- Flows
to 4000 GPM
- Heads
to 400 ft.
- Horsepower
to 125 HP
Download
Brochure
LCF
General Service Pumps
PACO Type LF Frame Mounted, single stage, end suction centrifugal
pumps are designed and built for compactness, high performance,
durability, and versatility of application.
PACO
Frame Mounted pumps with their heavy frames, shafts and
ball bearings are ideal for reliable heavy duty service.
They are available in 6 different frame sizes to match HP
requirements up to 300 HP.
Frame
Mounted models feature flexible coupled drive and are available
with steel or cast iron bases with drip-lip and drain tapping.
The
back pull out feature allows maintenance without disconnecting
system piping.
- Sizes
to 10"
- Flows
to 6000 GPM
- Heads
to 400 ft.
- Horsepower
to 300
Download
Brochure
VL
General Service Pumps
PACO type VL Vertical In-Line Pumps are available in a wide
selection of metallurgical and mechanical options to meet
specific pumping requirements.
Suction
and Discharge connections are the same size to simplify
piping. The type VL design incorporates a short shaft with
minimum overhang reducing shaft deflection. Back pull out
design allows rotating assembly to be removed without disturbing
the volute or piping for ease of maintenance and service.
PACO In-Line Pumps with discharge sizes 3 inch and larger
feature double volute design to reduce radial thrust and
prolong bearing life.
PACO
type VL Vertical In-Line Pumps eliminate costly installation
steps. They require 1/3 the space of a conventional pump
installation and drastically reduce the cost of layout foundation
and piping.
- Sizes
to 10"
- Flows
to 4050 GPM
- Heads
to 440 ft.
- Horsepower
to 125 HP
Download
Brochure
VLS
General Service Pumps
PACO type VLS Vertical In-Line Pumps are available in a
wide selection of metallurgical and mechanical options to
meet specific pumping requirements.
Suction
and Discharge connections are the same size to simplify
piping. The type VLS design incorporates a short shaft with
minimum overhang reducing shaft deflection. Back pull out
design allows rotating assembly to be removed without disturbing
the volute or piping for ease of maintenance and service.
PACO In-Line Pumps with discharge sizes 3 inch and larger
feature a double volute design to reduce radial thrust and
prolong bearing life.
PACO
type VLS Vertical In-Line Pumps eliminate costly installation
steps. They require 1/3 the space of a conventional pump
installation and drastically reduce the cost of layout foundation
and piping.
- Sizes
to 10"
- Flows
to 4050 GPM
- Heads
to 440 ft.
- Horsepower
to 125 HP
Download
Brochure
VSM
General Service Pumps
PACO type VSM is a close coupled, vertically mounted Top
Suction/Top Discharge Pump. The suction and discharge connections
are the same size to simplify piping. The design incorporates
an internal suction baffle to provide laminar flow and suction
and discharge bends, eliminating the need for suction diffusers,
angle type valves and/ or elbows.The type VSM design incorporates
a short shaft with minimum overhang reducing shaft deflection.
Top pull out design allows rotating assembly to be removed
without disturbing the volute or piping for ease of maintenance
and service. PACO Vertical Space Miser Pumps feature an
exclusive double volute design to reduce radial thrust and
prolong bearing life.
- Sizes
to 10"
- Flows
to 4050 GPM
- Heads
to 440 ft.
- Horsepower
to 125 HP
Download
Brochure
VSMS
General Service Pumps
PACO type VSMS is a split coupled, vertically mounted Top
Suction/Top Discharge Pump. The suction and discharge connections
are the same size to simplify piping. The design incorporates
an internal suction baffle to provide laminar flow and suction
and discharge bends, eliminating the need for suction diffusers,
angle type valves and/ or elbows. The type VSM design incorporates
a short shaft with minimum overhang reducing shaft deflection.
Top pull out design allows rotating assembly to be removed
without disturbing the volute or piping for ease of maintenance
and service. Further, a separate seal housing allows simplified
seal replacement without the need to disturb the motor or
pull the rotating assembly. Internal seals are standard,
but external seals are available options. PACO Vertical
Space Miser Pumps feature an exclusive double volute design
to reduce radial thrust and prolong bearing life.
- Sizes
to 10"
- Flows
to 4050 GPM
- Heads
to 440 ft.
- Horsepower
to 125 HP
Download
Brochure
KP
General Service Pumps
PACO type KP, horizontal splitcase, double suction, centrifugal
pumps are available with a wide selection of metallurgical
and mechanical options to meet specific pumping requirements.
Pump casings are horizontally split at the shaft centerline
to simplify inspections and maintenance. Impellers are dynamically
and hydraulically balanced. All PACO Type KP pumps are equipped
with cartridge type bearing housings for ease of maintenance.
Type KP splitcase pumps are available with packing and a
variety of mechanical shaft seals.
- Sizes
to 12"
- Flows
to 12,750 GPM
- Heads
to 700 ft.
- Horsepower
to 5000 HP
Download
Brochure
KPV
General Service Pumps
PACO type KPV split case double suction centrifugal pumps
are available in a wide selection of metallurgical and mechanical
options to meet specific pumping requirements.
Pump
casings are horizontally split at the shaft centerline to
simplify inspections and maintenance. Double suction impellers
are dynamically and hydraulically balanced and are available
in bronze, cast iron, and other special alloys for specific
applications.
Shafts
are precision ground and cartridge type bearing housings
allow a short bearing span for minimum shaft deflection.
Oversized heavy duty ball bearings provide long, trouble-free
service in continuous operations.
- Sizes
to 12"
- Flows
to 12,750 GPM
- Heads
to 700 ft.
- Horsepower
to 5000 HP
Download
Brochure
