Loop-Powered AC Current Transmitter
Loop-Powered AC Current Transmitter, CR4220 Series, produces 4 - 20 mA DC output current proportional to the input average RMS AC current. Provides long range monitoring of AC sinusoidal currents in an easy to install package.

Loop-Powered AC Current Transmitter Two Element CR4260 Series, produces 4 - 20 mA DC output current proportional to the input average RMS AC current. Provides long range monitoring of AC sinusoidal currents in an easy to install package.

>> Learn More | >> Request Information
 

Stainless Steel Pressure Transmitters
Model PX61 Stainless Steel Pressure Transmitters features compact construction, an integral amplifier, 2-wire 4-20mA output signal and extensive medium compatablility.

Model PX61 design provides a 1/2% accurate, low cost pressure transmitter that can operate over a wide temperature range with corrosion resistance. Available from stock in both standard and refrigerant models

>> Learn More | >> Request Information
 

Eutech Instruments Water Quality Analysis Solutions
Eutech offers a comprehensive range of laboratory and field instruments for electrochemical and photometric water analysis. This includes continuous on-line process instruments for the monitoring and control of pH, Conductivity, Total Dissolved Solids (TDS), Redox Potential (ORP), Dissolved Oxygen (DO), Temperature, Ion Concentration Analysis, Chlorine and other water quality parameters. Eutech products range from compact pocket testers and portable meters to research-grade benchtop meters and industrial process controllers packed with advanced user-friendly features.

>> Learn More | >> Request Information
 

Pulsatron Electronic Metering Pumps from Pulsafeeder
The PULSAtron Series A Plus Electronic Metering Pumps offer manual control over stroke rate and stroke length as standard with the option to select external pacer for automatic control.

Six distinct models are available, having pressure capabilities to 250 PSIG, and flow capacities to 48 GPD, with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 3% of maximum capacity.

Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances. (See The Complete Line)

>> Learn More | >> Request Information
 

Air Knives (Curtain Transvector)
ITW Vortec's Air Knives (Curtain Transvectors) efficiently blowoff wide surfaces of debris as well as provide high speed drying for a broad range of industrial applications. Ionizing Air Knives (Curtain Transvectors) add a Static Neutralizing Bar to kill static cling and discharge dust and particles for blowoff.

Since Air Knives (Curtain Transvectors) are air amplifiers, they use a small amount of compressed air to deliver a powerful, high velocity, laminar sheet of air over wide areas, moving webs, sheets, film, strips, auto bodies and other large assemblies and objets. Our patented design produces increased thrust and velocity, reduced noise, excellent uniformity and significantly outperforms any competing, wide blowoff device.

  >> Learn More | >> Request Information
 

Biodegradable Descaler
Dynamic Descaler does not corrode, pit, erode or have any other harmful effects on materials and metals such as; STEEL, IRON, BRASS, COPPER, PLASTIC, FIBER, TEFLON or other metals or materials found in water-based systems or equipment. You can clean your equipment IN-SITU (and sometimes without shutting down the machine). Dynamic Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning.

Dynamic Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. Because Dynamic Descaler is free rinsing you do not need to neutralize or pacify the system. The uniqueness of Dynamic Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.

>> Learn More | >> Request Information
 

Pulsation Dampeners ACCU-PULSE
Developed to remove pulsating flows from positive displacement pumps.

• increase system efficiency and pump life
• decrease maintenance and costs
• protect pipes, meters, valves and instrumentation from pulsation and vibration
• ensure meter accuracy, longevity and repeatabilit

>> Learn More | >> Request Information
 

Commonwealth AC Axial Fan FP-108-7 Jupiter
The Commonwealth AC Axial Fan FP-107 Jupiter is 127 x 127 x 38 mm. The housing comes in die cast aluminum painted black or natural color and the impellar is plastic with fiber glass filed UL 94V-0.

Other features include:

• Motor:
  Shaded pole, impedance protected
• Connecting:
  Terminal & wire leads
• Bearing System:
  Sleeve bearing & ball bearing

>> Learn More | >> Request Information
 

Carbicote Strippable Coatings
Carbicote® the EASY solution to Spray Booth Maintenance:

• EASY to use. Apply Carbicote® by spray, brush, or roller. It dries quickly, forming a removable barrier in minutes. Cleanup with soap and water, no solvent required!
• EASY to strip. Carbicote® has excellent cohesion. When pulled, it stretches and peels off in large sheets. It retains its flexibilty, does not become brittle with age. Carbicote also has excellent adhesion. It adheres well to most surfaces including stainless steel.
• EASY to store. Carbicote® is nonflammable; store it in the painting area ready for use. No "flash fire" danger from open containers; no special paint locker needed.
• EASY to handle. Carbicote® meets EPA and OSHA requirements for low solvent emission and safety in the workplace. Safe as latex paint to handle, no smelly solvent odor.

>> Learn More | >> Request Information
 

Plastic Characterized Control Valves
The Chemline E Series Characterized Control Valves provide extremely precise flow control of aggressive fluids. Valves flow characteristics (Cv vs. lift) follow theoretical linear or equal percentage curves through the entire range of stem travel. This is accomplished with precision made replaceable seats and plugs in a wide variety of Cv values.

The Teflon® bellows shaft seal provides almost frictionless stem movement and provides over 10 years of maintenance-free operation on aggressive chemical services1.

>> Learn More | >> Request Information
 

Air Wipe Blow-Off System - Ring-Blade
Air Wipe Blow-Off System - Ring-Blade from Nex Flow is easy to mount and maintain and reduces both compressed air consumption and noise levels.
It produces a “laminar” flow of air along its 360º angle using the “Coanda” effect which “entrains” a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade™ air-saver wiper-blade to produce an output flow up to 30 times.

Air Wipe Blow-Off System - Ring-Bladepay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle “rings” or simple annular slots used by other air wiping systems. Blow-off, cool & clean items like pipe, cable, wire and hose with the Air Wipe Blow-Off System Ring-Blade from Nex Flow.

>> Learn More | >> Request Information
 

Melt Pressure Measurement
ONEhalf20 is a recognized leader in pressure and temperature measurement solutions for the polymer, food, medical, and chemical extrusion processing industries.

Melt pressure measurement is critical to improving processing efficiency, safety and finished goods product quality.

In a typical single or twin-screw extruder, ONEhalf20 sensors are used to measure pressure along the extruder barrel and at the screen changer, melt pump, and extruder die. At each of locations, pressure measurement detects any potential problems and helps operators ensure smooth, trouble-free processing.

>> Learn More | >> Request Information
 

Ramsey DE10 And DE20 Impact Weighers
The Ramsey DE10 and DE20 Impact Weighers are unique devices designed to measure the mass flow rate and total mass of free-flowing particulate materials. They provide a low cost, yet highly accurate, method of measuring the mass flow of dry solids and powders for inventory process control and can help you save thousands of dollars by reducing waste and improving product quality.

The Ramsey DE10 and DE20 Impact Weighers are designed to provide continuous mass flow measurement in mechanical conveying systems without interrupting the flow of material. They are ideal for applications in vertical flow streams where weighfeeders or conveyor scales will not fit or cannot be applied.

>> Learn More | >> Request Information
  

Unipulse Weigh Batch Controller

Weigh Batch Controller Unipulse F800 is high speed and designed to provide efficient production control functions in a wide variety of applications. The panel-mount configuration uses only 5.12” W x 8.15”H of panel real estate, which offers maximum mounting flexibility.

Weigh Batch Controller Unipulse F800 is adaptable to a wide range of weighing applications. Precise measurement and control of Hopper scales, Packing scales and Multi-Ingredient Batching Systems are easily achieved.

Weigh Batch Controller Unipulse F800 features like SELF-CHECK and WATCHDOG TIMER insure reliability for automatic weigh systems. Along with three-gate feed control, automatic free fall compensation and discharge gate control, the F800 is a powerful tool for greater filling accuracy.

>> Learn More | >> Request Information
 

Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

>> Learn More