Circular Chart Recorder "10"
The FZY 5000 is a circular chart recorder like no other. Programmable alarm options combined with ease of setup provide the flexibility required for multiple recording applications.

The ink style FZY 5000 is the first recorder to self document setup configurations and can operate using standard or competitive charts, another first in the industry. Eliminate multi vendor chart inventories while reducing operator confusion.

>> Learn More | >> Request Information
 

Wind Measuring Systems
Our compact Wind Speed Transmitters have the perfect price performance ratio for most commercial and industrial applications. Their built-in heaters make them serviceable in winter conditions and their standard 4-20mA output signal makes them simple to interface to building control panels or industrial chart recorders.

See are complete line of wind measuring systems by clicking below.

>> Learn More | >> Request Information
 

New ProSeries Product Line, by Blue-White Industries
Introducing the new ProSeries product line designed to meet and exceed the most demanding industrial environments.

We've selected only the highest grade material to be used as standard. Each unit is tested prior to shipping to ensure quality, accuracy, and durability.

The products undergo a rigorous washdown test to ensure that it meets the NEMA 4X requirements. The new ProSeries features Peristaltic Metering Pumps, Ultrasonic Flowmeters and Diaphragm Metering Pumps.

>> Learn More | >> Request Information
 

Magnatex Pumps
MagnatexPumps are state of the art, heavy-duty, mechanical seal or magnetic drive pumps, available in ductile iron, steel, stainless steel, alloy, polypropylene or fluoropolymer-lined construction. Magnatex® pumps are successfully operating in tens of thousands of process industry applications worldwide, meeting tough pumping challenges for both low and high temperature liquids, from recovery solvents to heat transfer fluids, acids, bases, toxic, noxious and high purity fluids.

>> Learn More | >> Request Information
 

VortexAC Cabinet Coolers For Electrical Enclosures
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!

Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C noise level is 93% less than other conventional, vortex type cabinet coolers. When the thermo-statically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!

This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1.5” knockout hole to keep electrical control panels cool, clean and protected.

  >> Learn More | >> Request Information
 

Biodegradable Descaler
Dynamic Descaler does not corrode, pit, erode or have any other harmful effects on materials and metals such as; STEEL, IRON, BRASS, COPPER, PLASTIC, FIBER, TEFLON or other metals or materials found in water-based systems or equipment. You can clean your equipment IN-SITU (and sometimes without shutting down the machine). Dynamic Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning.

Dynamic Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. Because Dynamic Descaler is free rinsing you do not need to neutralize or pacify the system. The uniqueness of Dynamic Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.

>> Learn More | >> Request Information
 

Condec Pressure Instrumentation
Condec designs and manufactures superior-quality, high-accuracy pressure devices for use in a variety of industries including aerospace, automotive, utilities, military, government laboratories, petroleum, chemical, machine tool, and general manufacturing.

Condec's products include the following:

• Pressure Calibration Standards
• Digital Pressure Indicators
• Pneumatic Pressure Intensifier
• Portable Pneumatic Pressure Source
• Pressure Controllers
• Precision Pneumatic Controllers
• Hand Held Pressure Calibrator
• Micro Metering Precision Valve
• Regulator Series

>> Learn More | >> Request Information
 

Liquid Level Float Switches
Liquid Level Float Switches from Ktech Industrial Products Inc., Are top-mounted with between one and four setpoints. A single point sensor may be used to provide a high or low level alarm contact.

Liquid Level Float Switches are factory-sealed and explosion-proof. They are approved for hazardous locations, Class 1, Division 1, Groups B, C, D. Explosion-proof housings are an optional accessory.

>> Learn More | >> Request Catalog
 

Belt Type Oil Skimmers
Mini-skimmers have been in use throughout the world since 1990. Thousands are used daily to remove unwanted floating "tramp" oils.

They are small, run very quietly, and use a very dependable permanent magnet motor! Standard models for industrial users include oil pickup rate to 1 gallon/hour, loose or fixed tail pulley design, and a choice of polyurethane (for coolants & oil/water) or stainless steel(for parts washing) belts in four standard length sizes.

Special skimmers with other options such as special belt lengths (to 100 ft.), two belts, stainless motor covers, etc. are available.

>> Learn More | >> Request Information
 

Plastic Variable Area Flow Meters
Chemline F Series Variable Area Flow Meters are ideal for plastic piping. They provide a combination of accurate visual flow rate measurement and clear flow indication from a distance. Optional limit switches allow the units to signal a low or high flow alarm. An optional flow transmitter provides a 4 to 20 mA signal output. These flow meters must be installed vertically with flow upward.

• Low Cost Visual Indication
• For Water, Chemicals or Gas

>> Learn More | >> Request Information
 

Air Amplifying Nozzles For Blow-Off and Blow Gun Applications
Nex Flow air nozzles (air amplifying nozzles) are designed to fit into small spaces. We have an adjustable nozzle for some applications and then a few different nozzles with varying force, depending on the application.

Model 47001 – is a small brass air nozzle (air amplifying nozzle) to fit into small spots and used by many machine builders for blow-off applications.

Model 47002 – is the small Model 47001 brass air nozzle (air amplifying nozzle) added to a copper tube. Machine builders can bend the copper tube and aim the nozzles to where ever it suits. The copper tube is simply press fit into the customer’s system. (Even more nozzles click Learn More)

>> Learn More | >> Request Information
 

Pressure Indicator
The ONEhalf20 IP258 Pressure Indicator with strain gauge input and dual 5 digit display features high accuracy and simplicity of operation. The IP258 is available with up to three programmable alarms, 4-20mA or 0-10Vdc process value re-transmission, and MODbus communications.

The IP258 Pressure Indicator offers simplified user functionality with front panel buttons for Zero, Peak, and Manual Alarm Reset. The IP258 Pressure Indicator is a compact 1/8 DIN (96 x 48 mm) package with a large 0.5 inch LED display for process pressure indication.

>> Learn More | >> Request Information
 

DFM 5.0 Doppler Flow Meter
Measure flow from outside a pipe. The Greyline DFM 5.0 is designed for "difficult liquids" that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The standard, strap-on ultrasonic sensor fits any pipe 1/2" (12.5 mm) Inside Diameter or larger. The electronics/display enclosure can be mounted nearby.

Use the isolated 4-20mA to transmit flow to remote displays, recorders or controllers. The 2 programmable relays (optional 4 total) can be used for flow control, pump protection or flow proportionate pulse. Calibration is easy with the built-in 5-key calibrator. Display and totalize flow in your choice of engineering units (gallons, liters etc.)

>> Learn More | >> Request Information
 

Digital Panel Meters Doric 1000 Pro Series
Digital Panel Meters Doric 1000 Pro Series are suitable for a wide range of display applications. Designed as a low-cost solution, they offer ruggedness and reliability for many current, voltage, frequency and process applications.

A full range of inputs can be measured simply by selecting the proper externally accessible terminals located at the rear of the unit. The decimal point location can be changed by moving the jumpers behind the detachable faceplate.

Digital Panel Meters Doric 1000 Pro Series consists of seven models measuring DC Voltage, AC Voltage, DC current, high AC current, high DC current, scalable process and frequency inputs. Engineering unit labels are supplied to indicate measured value.

>> Learn More | >> Request Information
 

Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

>> Learn More