Drum Heaters
Drum Heaters are a used to control temperatures on a variety of pails or drums where maintaining viscosity and keeping the contents fluid are important. Drum Heaters provide uniform heat and prevent scorching or degradation of sensitive materials.

Drum Heaters also provide freeze protection and are available with fixed or adjustable thermostats for various applications. Common voltages and sizes are available from stock but custom designs can be manufactured to suit your application.

>> Learn More | >> Request Information
 

Flue Gas Temperature Transmitters
Our Flue Gas Temperature Transmitters are constructed using the same technique we use in the industrial sensors we supply to power plants and heavy industries. The RTD or thermocouple is embedded in magnesium oxide, packed and sealed within a stainless steel sheath.

Because the sensor is so well protected from shock in this construction, long life is ensured, even under the most severe conditions. We incorporate a flange in our standard design in order to make mounting easy. The terminal box containing the transmitter electronics is mounted on a stand-off to minimize heat transfer from the flue gas to the electronics.

>> Learn More | >> Request Information
 

SensoRAD^TM Wireless Transmitters
Whether you need to run signals a few hundred feet or 20 miles the SensoRAD™ Wireless Transmitters are Simple to Use, Cost Effective, and Very Reliable. Simply connect up to two 4-20mA signals or RTD or Strain Gauge and four contact closures and begin receiving the exact signals up to 20 miles away. These small DIN Rail mounted devices operate on license free ISM 900 MHz or 2.4 GHz frequency bands using frequency hopping spread spectrum technology. Plug-in preamplifiers are available for dual 4-20 mADC, RTD's or Strain Gauges. The strain gauge preamp includes a precision 10 VDC excitation supply for up to 4 strain gauges.

>> Learn More | >> Request Information
 

Automatic "Compact" Disc Filtration
The 2" "Compact" automatic water filtration system employs a unique disc filtration system that removes organic and non-organic solids down to 20-micron while keeping the removal efficiency at 90%. This filtration system is simple to operate, lightweight (all plastic), and uses only 7 gallons for backwash. It is ideal for drinking water pre-filtration, cooling water, irrigation, aquaculture etc. NSF approved system available.

>> Learn More | >> Request Information
 

ULTRAMETER^TM
Handheld Conductivity, Resistivity, pH, ORP, TDS, Temperature Instrument
All ULTRAMETER models deliver performance of ±1% of reading. This high level of accuracy has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor and powerful microprocessor-based circuitry. With displayed values of up to 9999µs/ppm, the full four-digit LCD ensures resolution levels never before possible in such affordable instruments.
 
Factory calibrated with NIST traceable solutions, each ULTRAMETER can be supplied with both certification of traceability and NIST traceable solutions for definitive calibration.

>> Learn More | >> Request Information
 

Minco Flexible Heaters
Flexible Heaters from Minco Products are simple to apply, yet capable of higher heat output than traditional metal-clad heaters. Minco Flexible Heaters are available in Silicone Rubber, Kapton (Polyimide), Polyester and Mica insulations.

The flat design gives excellent heat transfer, long life, and uniform heat. Minco offers over 1,800 stock and standard models. For custom designs specify integral sensors, odd shapes, profiled heat output, and other performance-enhancing options. Then complete your thermal system with Minco sensors and controllers.

>> Learn More | >> Request Information
 

Melt Pressure Measurement
ONEhalf20 is a recognized leader in pressure and temperature measurement solutions for the polymer, food, medical, and chemical extrusion processing industries.

Melt pressure measurement is critical to improving processing efficiency, safety and finished goods product quality.

In a typical single or twin-screw extruder, ONEhalf20 sensors are used to measure pressure along the extruder barrel and at the screen changer, melt pump, and extruder die. At each of locations, pressure measurement detects any potential problems and helps operators ensure smooth, trouble-free processing.

>> Learn More | >> Request Information
 

Static Control Products
Eliminate static with static control products from Nex Flow^TM. Quality Haug static bars, power supplies in several versions demanded by modern industrial standards, Air-Blade^TM Ionizers provide for the most economical static elimination devices, different size Ionizing Nozzles are available and used to eliminate static, flat jet mini-spot inonizers neutralize electrostatic spot changes, ion blowers where air is required to affect static removal at a distance and compressed air is not available, Multicheck is a performance testing unit for power supplies and for ionization units, hand held static meter is reasonably priced and easy to handle.

>> Learn More | >> Request Information
 

Midget Model 277 Levelometer
The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks. Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges.

These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale.

>> Learn More | >> Request Information
 

Nex Flow^TM Frigid-X^TM Control Panel Cooler
Nex Flow^TM Frigid-X^TM Low Cost Control Panel Cooler is available in both NEMA Type 12 and NEMA Type 4-4x versions – fully recognized ULC component approved. Provides maintenance free air conditioning for electrical enclosures and also purges the enclosure of any dirt and moisture for humidity control and to keep the enclosure clean and dry. Very compact. Easy to Install. New “small” version now available for smaller control panels. All Nex Flow^TM Frigid-X^TM coolers are stainless steel for tough environments yet often lower in cost than competitive aluminum units.

>> Learn More | >> Request Information
 

Biodegradable Descaler
Dynamic Descaler does not corrode, pit, erode or have any other harmful effects on materials and metals such as; STEEL, IRON, BRASS, COPPER, PLASTIC, FIBER, TEFLON or other metals or materials found in water-based systems or equipment. You can clean your equipment IN-SITU (and sometimes without shutting down the machine). Dynamic Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning.

Dynamic Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. Because Dynamic Descaler is free rinsing you do not need to neutralize or pacify the system. The uniqueness of Dynamic Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.

>> Learn More | >> Request Information
 

Chemline SG Series Gauge Isolators
Chemline SG Series Gauge Isolators allow inexpensive pressure gauges, or any other pressure instrument to be used in corrosive services. The upper chamber (gauge side) is filled with a stable fluid such as glycerine‡. A diaphragm separates it from the lower chamber which receives the media under pressure.

The 1/2" gauge connection allows use of the popular 4" and 4-1/2" diameter gauges. Pressure switches or transmitters may also be installed. Customers can easily fill isolators and install their own gauges.

>> Learn More | >> Request Information
 

DFM 5.0 Doppler Flow Meter
Measure flow from outside a pipe. The Greyline DFM 5.0 is designed for "difficult liquids" that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The standard, strap-on ultrasonic sensor fits any pipe 1/2" (12.5 mm) Inside Diameter or larger. The electronics/display enclosure can be mounted nearby.

Use the isolated 4-20mA to transmit flow to remote displays, recorders or controllers. The 2 programmable relays (optional 4 total) can be used for flow control, pump protection or flow proportionate pulse. Calibration is easy with the built-in 5-key calibrator. Display and totalize flow in your choice of engineering units (gallons, liters etc.)

>> Learn More | >> Request Information
 

Ashcroft Pressure Transducers and Pressure Transmitters

The Ashcroft Trademark has epitomized quality and reliability in pressure instrumentation for over 100 years. They offer a full line of pressure transducers and transmitters. Typical output signals from their transducers are 4-20 mA, 1-5VDC, 1-6VDC, 0-5VDC, and 0-10VDC. Their products range from low range differential to rugged high pressure, explosion-proof transducers for use in extreme applications

>> Learn More | >> Request Information
 

Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

>> Learn More