Immersion Heaters
Screw Plug Immersion Heaters are ideal for immersion min liquids, where space and connections are a problem.

Screw Plug Immersion Heaters are installed in medium to small size containers at pressures up to 3000 PSI. Watt densities from 90 Watts/sq. inch, Explosion Proof (NEMA 7), Corrosion Resistant (NEMA 4X), and General Purpose Terminal housings are available.

A number of sheath materials like Titanium, Incoloy, Stainless Steel, Steel, and Copper can be used as required for specific applications. To guarantee sheath material and watt density compatibility with material or process being heated consult HCS. Also view our Flanged Immersion Heaters.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Wind Measuring Systems
Our compact Wind Speed Transmitters have the perfect price performance ratio for most commercial and industrial applications. Their built-in heaters make them serviceable in winter conditions and their standard 4-20mA output signal makes them simple to interface to building control panels or industrial chart recorders.

See are complete line of wind measuring systems by clicking below.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Lutz Pumps- Air Operated Double Diaphragm Pumps
Lutz air operated double diaphragm pumps are capable of delivering even critical material to be conveyed in a gentle and safe manner. They are equally well suited for aggressive, abrasive or easily inflammable liquids and for many media with a high viscosity.

A variety of applications:

• For viscous and thin-bodied media
• Absolutely lube free and non-stalling valve system
• Developed for heavy duty
• Reliable and gentle pump principle

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

VortexAC Cabinet Panel Coolers For Electrical Enclosures
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!

Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C noise level is 93% less than other conventional, vortex type cabinet coolers. When the thermo-statically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!

This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1.5” knockout hole to keep electrical control panels cool, clean and protected.

  >> Learn More | >> Request Information | >> Vendors Product Last Issue
 

End Suction Centrifugal Pump Multi-Duti Advance 3000
The Advance 3000 was designed to meet the demand of low flow, high-pressure applications, while utilizing the compatibility of Noryl wetted parts. The enclosed impeller design ensures long life and durability. When used with the patented Impenatra Seal, the fluid does not contact any metal parts. This allows it to properly handle many applications at a fraction of the cost of exotic alloys. The Advance 3000 has multiple drain locations, allowing for several discharge orientations.

The Advance 3000 is a close coupled, unit end suction centrifugal pump line which is molded in Noryl. It's high efficiency design makes it suitable for medium flows (to-60 GPM) and higher heads (up to 160' TDH).

 >> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Strip Chart Recorder 100 mm - Shinko HR-700
The Shinko HR-700 strip chart recorder offers a true hybrid design offering fully programmable features including: input types, chart speed, data recording session and intervals, scaling, alarm points, etc.

All recorders feature full function digital display of channel number, PV value, and recording and alarm status, etc. Bright red 18mm display. Available in either 1 or 2 channel, or 6 point recording versions. The Shinko HR-700 strip chart recorder feature true multi-input capabilities: 13 thermocouple types, 1 RTD type, 1 current inputs, and 7 voltage inputs. Measures only 150 mm in depth and weighs less than 1.5kg. All units manufactured to strict ISO standards and offer full 2 year manufacturers warranty.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Commonwealth AC Axial Fan FP-108-7 Jupiter
The Commonwealth AC Axial Fan FP-107 Jupiter is 127 x 127 x 38 mm. The housing comes in die cast aluminum painted black or natural color and the impellar is plastic with fiber glass filed UL 94V-0.

Other features include:

• Motor:
  Shaded pole, impedance protected
• Connecting:
  Terminal & wire leads
• Bearing System:
  Sleeve bearing & ball bearing

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Melt Pressure Measurement
ONEhalf20 is a recognized leader in pressure and temperature measurement solutions for the polymer, food, medical, and chemical extrusion processing industries.

Melt pressure measurement is critical to improving processing efficiency, safety and finished goods product quality.

In a typical single or twin-screw extruder, ONEhalf20 sensors are used to measure pressure along the extruder barrel and at the screen changer, melt pump, and extruder die. At each of locations, pressure measurement detects any potential problems and helps operators ensure smooth, trouble-free processing.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Carbicote Strippable Coatings
Carbicote® the EASY solution to Spray Booth Maintenance:

• EASY to use. Apply Carbicote® by spray, brush, or roller. It dries quickly, forming a removable barrier in minutes. Cleanup with soap and water, no solvent required!
• EASY to strip. Carbicote® has excellent cohesion. When pulled, it stretches and peels off in large sheets. It retains its flexibilty, does not become brittle with age. Carbicote also has excellent adhesion. It adheres well to most surfaces including stainless steel.
• EASY to store. Carbicote® is nonflammable; store it in the painting area ready for use. No "flash fire" danger from open containers; no special paint locker needed.
• EASY to handle. Carbicote® meets EPA and OSHA requirements for low solvent emission and safety in the workplace. Safe as latex paint to handle, no smelly solvent odor.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Top Valve - Back Pressure/Pressure Relief Valves
Back Pressure Valves and Pressure Relief Valves named Top Valve. A new line of diaphragm style, has been introduced by Primary Fluid Systems Inc.. New features include a completely adjustable pressure range of 0-150 PSIG and a built-in air release to reduce priming difficulties with metering pumps.

Top Valve Back Pressure Valves and Pressure Relief Valves are available in seven sizes, 1/4" through 2" NPT and eight (8) materials of wetted construction. The seat design of this new line of valves greatly extends the normal life expectancy of the diaphragm.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Nex Flow^TM X-Stream^TM Air Blade^TM Air Knife
Nex Flow^TM Silent X-Stream^TM Air Blade^TM Air Knife is highly efficient and quiet, Easy to mount and maintenance free. Replaces drilled pipe or rows of nozzles and jets with compressed air savings up to 50%. Unlike most competitors they have a stainless steel shim (no plastic) to maintain a small gap for compressed air that exits and entrains surrounding air to “amplify” air flow. This produces a narrow curtain of air flow for blow-off and cooling. Air inlets at ends or back with convenient mounting holes. In addition to the stainless steel shim, the aluminum unit is gold anodized for long life. All stainless steel units are available for high temperature and food applications. Compact and sleek design for tight areas and high efficiency operation.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Ramsey Granucor Solids Flow Measurement System
The Ramsey Granucor Solids Flow Measurement System provides continuous, real-time flow measurement of free falling materials and dense phase, pneumatically conveyed bulk solids. It gives you the feedback you need to control your process, which allows you to increase the efficiency of your process, run a safer system, produce higher quality products, and improve your bottom line.

The in-line measurement of bulk solids flow is important for product quality, process efficiency and system safety. The Ramsey Granucor Solids Flow Measurement System from Thermo Fisher Scientific provides continuous, real-time flow measurement of free falling materials or dense phase, pneumatically conveyed bulk solids. Its non-intrusive design and patented software can be used to monitor and control the flow in pipes or the flow distribution through pipe networks.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Plastic Variable Area Flow Meters
Chemline F Series Variable Area Flow Meters are ideal for plastic piping. They provide a combination of accurate visual flow rate measurement and clear flow indication from a distance. Optional limit switches allow the units to signal a low or high flow alarm. An optional flow transmitter provides a 4 to 20 mA signal output. These flow meters must be installed vertically with flow upward.

• Low Cost Visual Indication
• For Water, Chemicals or Gas

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Nex Flow^TM Reversible Drum Angel
Nex Flow^TM Drum Angel is a maintenance free system to recover spilled liquids, coolant, sludge, tramp oil, waste water, and other liquids using only compressed air. The unit is “reversible” so you can fill or empty any sealed metal drum in under two minutes. Does not break down in harsh environments, no electricity and stainless steel construction. Built in safety features prevent over filling and spills. More efficient than most competitive units and low priced.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Unipulse Weigh Batch Controller

Weigh Batch Controller Unipulse F800 is high speed and designed to provide efficient production control functions in a wide variety of applications. The panel-mount configuration uses only 5.12” W x 8.15”H of panel real estate, which offers maximum mounting flexibility.

Weigh Batch Controller Unipulse F800 is adaptable to a wide range of weighing applications. Precise measurement and control of Hopper scales, Packing scales and Multi-Ingredient Batching Systems are easily achieved.

Weigh Batch Controller Unipulse F800 features like SELF-CHECK and WATCHDOG TIMER insure reliability for automatic weigh systems. Along with three-gate feed control, automatic free fall compensation and discharge gate control, the F800 is a powerful tool for greater filling accuracy.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

>> Learn More