FuzyPro Explosion Proof Temperature Transmitter
The FUZYPRO 8080TR is a Digital, PC programmable, galvanicaly isolated 2-wire smart transmitter. The unit converts 13 types of thermocouple sensors; 12 types of RTD sensors, configured as 2, 3 and 4 wires; potentiometer, resistor and millivolt inputs into process current loop. A 24 bit A/D converter is the heart of this outstanding performance.

The FUZYPRO 8080TR Universal input Smart transmitters are designed for use in process industries where vibration, inclement weather and corrosive atmospheres prevail. The electronics are enclosed in a copper-free epoxy coated Aluminum housing and for more aggressive environments, a SS316 housing is optionally available. The housings meet the requirements of NEMA 4X & IP68, and are also certified Explosion Proof by FM/CSA/ATEX/IECEx.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Split And Solid Core Current Transducers
AC current to a proportional DC voltage of 0 to 5 Volts. Used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. All models are CSA approved and UL listed.

Current Transducers Solid Core Sentry 100 Series is used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. Current Transducer Solid Core Sentry 100 Series models are CSA approved and UL listed.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

On-line Chromium VI Analyser CR 200
On-line chromium VI analysis has become essential to uphold the environmental and sanitary regulations for all kinds of  water: rivers and underground water, drinking water, industrial effluent, sewage. 
 
Reliability and stability are the main requirements of on-line analysis systems only achieved by UV spectroscopy.

• Long range stability thanks to UV spectroscopy
• No reagent
• Measurement within 5 seconds
• Usable with unfiltered water
• Compact size 

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Personal Cooling System
Personal Air Conditioners were created to keep workers wearing protective clothing comfortable in extremely hot or cold working conditions. The Vortex Tube powered personal air conditioners use compressed air at 70-100 PSIG to produce cold or warm air to heat or cool a worker in protective suite. Temperature range from 60 F cooler or hotter than the inlet can be achieved.

Applications:
Unlike "ice pack" type vests, the Personal Air Conditioners (PACs) offers consistent and continuous cooling to minimize heat stress and increase worker productivity in hot surroundings. The vest allows full range of motion with no airflow restrictions and can be worn under welding leathers or protective clothing. The vortex tube unit, worn on a supplied belt, cools or heats inlet temperature by ±60°F.

  >> Learn More | >> Request Information | >> Vendors Product Last Issue
 

ULTRAMETER^TM
Handheld Conductivity, Resistivity, pH, ORP, TDS, Temperature Instrument
All ULTRAMETER models deliver performance of ±1% of reading. This high level of accuracy has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor and powerful microprocessor-based circuitry. With displayed values of up to 9999µs/ppm, the full four-digit LCD ensures resolution levels never before possible in such affordable instruments.
 
Factory calibrated with NIST traceable solutions, each ULTRAMETER can be supplied with both certification of traceability and NIST traceable solutions for definitive calibration.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

PRO Line of 4-20 mA Vibration Products
The PRO line of 4-20 mA Vibration Products are matched to your reliability requirements for Industrial Process Control. 4-20 mA outputs are proportional to the overall vibration on your machines, and are available in Loop Powered Vibration Sensors/Transmitters, Loop Powered Dual Output Vibration Sensors/Transmitters, Hazardous Area Loop Powered Vibration Sensors/Transmitters, Signal Conditioners, Relays, Enclosures, and other supporting 4-20 mA hardware. Enable your reliability program with 4-20 mA inputs proportional to acceleration or velocity, and protect that critical machinery before catastrophic failure occurs. Please contact sales@ctconline.com for additional information.

>> Learn More | >> Request Information
 

Dynalco Controls
Dynalco Controls sensors have many uses including speed, direction sensing, flow and power measurement, counting, timing, and synchronization. Our sensors come in a wide variety of lengths, body and pole piece diameters, and output levels. Styles include self-powered magnetic, miniature, dc-powered, and Hall effect. Dynalco also engineers sensors for custom applications.

Dynalco Controls instrumentation includes a full range of tachometers, hourmeters, and Speed Switch, Temperature Indicator and trips, and solid-state digital meters.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Pump Controllers from Ktech Industrial Products Inc.
Pump Controllers are installed to automatically operate a pump to control the level of a liquid in a tank. They are used in conjunction with Ktech Multi-Level Float Switches. Use two contacts to start and stop the pump. A relay circuit switches power to the fractional horsepower pump motor or to the three-phase contactor of a large pump motor.

Similarly, the switch contacts can be used to operate solenoid valves. Use additional contacts to indicate an alarm condition. These alarms provide an audible and visual signal. The audible signal can be muted after which the warning light remains on until the alarm condition is corrected.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Extruder Rupture Disks
ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI. Offered with several mounting thread styles that are commonly found on plastics processing machinery.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Carbicote Strippable Coatings
Carbicote® the EASY solution to Spray Booth Maintenance:

• EASY to use. Apply Carbicote® by spray, brush, or roller. It dries quickly, forming a removable barrier in minutes. Cleanup with soap and water, no solvent required!
• EASY to strip. Carbicote® has excellent cohesion. When pulled, it stretches and peels off in large sheets. It retains its flexibilty, does not become brittle with age. Carbicote also has excellent adhesion. It adheres well to most surfaces including stainless steel.
• EASY to store. Carbicote® is nonflammable; store it in the painting area ready for use. No "flash fire" danger from open containers; no special paint locker needed.
• EASY to handle. Carbicote® meets EPA and OSHA requirements for low solvent emission and safety in the workplace. Safe as latex paint to handle, no smelly solvent odor.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Plastic Characterized Control Valves
The Chemline E Series Characterized Control Valves provide extremely precise flow control of aggressive fluids. Valves flow characteristics (Cv vs. lift) follow theoretical linear or equal percentage curves through the entire range of stem travel. This is accomplished with precision made replaceable seats and plugs in a wide variety of Cv values.

The Teflon® bellows shaft seal provides almost frictionless stem movement and provides over 10 years of maintenance-free operation on aggressive chemical services1.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Cabinet Panel Coolers
Frigid-X^TM Cabinet Panel Coolers NEMA Type 12 For Electronic Control Panels are UL Component Recognized for general use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments.

Frigid-X^TM Cabinet Panel Coolers NEMA Type 3R For Electronic Control Panels are UL Component Recognized and for outdoor use. Stainless steel to hold up to rain, snow, humidity and general outdoor use.

Frigid-X^TM Cabinet Panel Coolers NEMA Type 4-4X For Electronic Control Panels are UL Component Recognized - splash resistant, for use in wash down environments as well as outdoor use. Unique patent pending design for secure water tight protection. Stainless steel for food service and corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

DFM 5.0 Doppler Flow Meter
Measure flow from outside a pipe. The Greyline DFM 5.0 is designed for "difficult liquids" that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The standard, strap-on ultrasonic sensor fits any pipe 1/2" (12.5 mm) Inside Diameter or larger. The electronics/display enclosure can be mounted nearby.

Use the isolated 4-20mA to transmit flow to remote displays, recorders or controllers. The 2 programmable relays (optional 4 total) can be used for flow control, pump protection or flow proportionate pulse. Calibration is easy with the built-in 5-key calibrator. Display and totalize flow in your choice of engineering units (gallons, liters etc.)

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Nex Flow^TM Reversible Drum Angel
Nex Flow^TM Drum Angel is a maintenance free system to recover spilled liquids, coolant, sludge, tramp oil, waste water, and other liquids using only compressed air. The unit is “reversible” so you can fill or empty any sealed metal drum in under two minutes. Does not break down in harsh environments, no electricity and stainless steel construction. Built in safety features prevent over filling and spills. More efficient than most competitive units and low priced.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Data Track Process Instrumentation

Our Tracker products include digital panel meters, PID controllers, signal conditioning units, remote data acquisition systems and large digit displays.

Data Track pioneered the use of a universal input, making our products highly adaptable. Unlike similar products on the market, there is no need to specify the input type for Data Track's range of panel meters, PID controllers, signal conditioners or data acquisition modules at the time you place an order.

Our DIN rail mounted Tracker 300 range of PID controllers feature single loop integrity as standard and do not require extra power supplies. For more information on Data Track process instrumentation products learn more below.

>> Learn More | >> Request Information | >> Vendors Product Last Issue
 

Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

>> Learn More