|
|
Drum Heaters
Drum Heaters are a used to control temperatures on a variety of pails or drums where maintaining viscosity and keeping the contents fluid are important. Drum Heaters provide uniform heat and prevent scorching or degradation of sensitive materials.
Drum Heaters also provide freeze protection and are available with fixed or adjustable thermostats for various applications. Common voltages and sizes are available from stock but custom designs can be manufactured to suit your application. Also see our Explosion Proof Drum Heaters.
|
|
|
Split And Solid Core Current Transducers
AC current to a proportional DC voltage of 0 to 5 Volts. Used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. All models are CSA approved and UL listed.
Current Transducers Solid Core Sentry 100 Series is used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. Current Transducer Solid Core Sentry 100 Series models are CSA approved and UL listed.
|
|
|
Corrosion Monitoring Instruments
The MS1500E is a hand-held, battery-powered, corrosion meter capable of measuring and storing data from all types of electrical resistance (ER) corrosion probes. The instrument is light weight, microprocessor-based, and features a simple, menu-driven interface using a 12-key keypad and a 4-line LCD display.
Corrosion rate measurements are made using the electrical resistance method. Essentially, the instrument measures the resistance of the probe element which changes over time, as metal loss occurs. The rate of change is directly proportional to corrosion rate. This method finds a wide variety of applications since it can be used in conductive and nonconductive environments such as petroleum, chemical, water, soil, or even atmosphere.
|
|
|
VortexAC Cabinet Panel Coolers For Electrical Enclosures
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!
Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C noise level is 93% less than other conventional, vortex type cabinet panel coolers. When the thermo-statically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!
This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1.5” knockout hole to keep electrical control panels cool, clean and protected.
|
|
|
NEW Nex FlowTM Air Products Corp. Catalog
Nex FlowTM Air Products Corp., is a manufacturer of compressed air-operated products made to improve plant efficiency, improve energy efficiency, improve quality and enhance the environment. Our product line includes air blow-off products that reduce air noise levels and compressed air use, and vortex tubes technology using vortex tubes for spot cooling, control panel cooling, tool cooling and other unique applications. It also includes air operated conveying products and static control technology.
Nex FlowTM Air Products Corp., introduces their new comprehensive catalog featuring specialized compressed air technology products. This new catalog features panel coolers, air knives, air wipes, air amplifiers, air nozzles and jets, tool coolers, vortex tubes and spot coolers, safety air blowoff guns, static eliminators, air operated conveyors, air optimization products and industrial housekeeping and specialized products.
|
|
|
Grundfos Pumps
Grundfos pumps are made for providing the people of the world with water – day in and day out, and in an efficient and reliable way. And for any purpose, whether the water is used to satisfy thirst, irrigate fields, water animals, speed industrial processes, heat or cool buildings, or handle waste-water - Grundfos pumps available in Canada from Vissers Sales Corp.
|
|
|
Midget Model 277 Levelometer
The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks. Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges.
These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale
|
|
|
Portable Doppler Flow Meter Works From Outside A Pipe
Mount the ultrasonic sensor on the outside of metal or plastic pipes and the new PDFM 5.0 Portable Doppler Flow Meter shows flow rate instantly. Designed for wastewater, sludge, slurries, chemicals and abrasives. Use it for flow troubleshooting, spot checks or balancing flow.
This battery-powered Flowmeter includes a backlit display, 4-20mA output and 320,000 point data logger with USB output and software. Push button sleep mode extends battery life for long periods of operation.
|
|
|
Chemline Paddle Wheel Flow Sensors
The Type F3.00/F3.01 Paddle Wheel Flow Sensors are the core items in the Digiflow® FlowX3 line. A square wave output signal is generated with frequency proportional to rate of rotor rotation and flow velocity. This pulse output is normally fed to a FlowX3 flow monitor/transmitter, blind transmitter, batch controller or adjustable flow switch. It can also be fed to other brand instruments or PLC’s.
Two types of sensors are available, Hall Effect which requires a 5 to 24 VDC power supply and Coil Effect which operates with less power, 3 to 5 VDC. Coil is required with the battery powered flow monitor. Hall Effect signals may be transmitted up to 300 meters (984 ft.) without the need for conditioning whereas Coil Effect signals may be transmitted up to 16 m (52.5 ft.) without conditioning.
|
|
|
Carbicote Strippable Coatings
Carbicote the EASY solution to Spray Booth Maintenance:
* EASY to use. Apply Carbicote by spray, brush, or roller. It dries quickly, forming a removable barrier in minutes. Cleanup with soap and water, no solvent required!
* EASY to strip. Carbicote has excellent cohesion. When pulled, it stretches and peels off in large sheets. It retains its flexibilty, does not become brittle with age. Carbicote also has excellent adhesion. It adheres well to most surfaces including stainless steel.
* EASY to store. Carbicote is nonflammable; store it in the painting area ready for use. No "flash fire" danger from open containers; no special paint locker needed.
* EASY to handle. Carbicote meets EPA and OSHA requirements for low solvent emission and safety in the workplace. Safe as latex paint to handle, no smelly solvent odor.
|
|
|
Signal Conditioner Shinko SB Series
The Shinko SB Series Signal Conditioner is designed to meet the needs of the standard users and the cost focused. The Shinko SB Series Signal Conditioner is slim, economical and compact.
When you need a reliable, standard conditioner, the SB series can help.
|
|
|
Quality Ultrasonic Leak Detector
This device can be used to locate costly leaks in your compressed air system. Eliminating compressed air leaks can recover a tremendous amount of energy that can be used to operate all types of nozzles, amplifiers and vortex tubes with no added cost! Air savings means free energy. An Ultrasonic Leak Detector (UDC) is typically a hand-held device that is used to locate leaks by aiming it in the direction of a suspected source of an air leak. When a leak is present, then an audible tone can be heard via the use of appropriate head-phones. The proper head phone is very important as well as sensitivity in order to distinguish air leaks from other phenomena which can be miss-interpreted, and even made worse by potential false displays form and LED or other type of display.
|
|
|
Melt Pressure Gauges
Melt Pressure Gauges from ONEhalf20 are totally mechanical devices that offer ease of installation and maintenance. These melt pressure gauges are ideally suited to processors who require only visual indication of melt pressure. Melt Pressure Gauges from ONEhalf20 are available in two unique styles. The CTG style features a 6" rigid stem and 30" of flex capillary. The RTG style has only a 6" rigid stem. Other configurations of these two styles are also available. In addition ONEhalf20 also offers these same mechanical gauges with 3.3 mV/Volt transducer output, or either 4-20mA or 0 - 10 Vdc transmitter outputs. These unique gauges feature the standard Bendix style 6 pin bayonet connector and are ideal for processors looking for localized visual indication at the extruder barrel.
|
|
|
Longfellow II Linear Position Transducer
The
new Longfellow II Linear Position Transducer incorporates design
innovations to increase transducer life and provide greater resistance
to
vibration, while providing a smooth high quality signal for the most
demanding
factory control applications. It has a solid stainless steel shaft,
longer front-
end bearings, a vibration-free damped element, a spring-loaded ball
joint and
a high precision precious metal wiper. Carrier guides extruded the full
length
of the housing insure smooth operation even under severe side load
conditions.
|
|
|
HANOVER MESSE
HANNOVER MESSE remains the world's leading showcase for industrial
technology. Please find here all trade fairs of HANNOVER MESSE 2008.
Better, faster, more effective: to survive and prosper in the face of global
competition companies need to constantly maintain and improve their
performance potential. Leading-edge technology plays a pivotal role in
corporate competitiveness.
HANNOVER MESSE is the ideal place to obtain the latest industrial know-how.
Established sixty years ago, HANNOVER MESSE today ranks as the leading
international showplace for industrial technologies, materials and product
ideas.
Get your complimentary entry ticket by clicking here today.
|
|
|
Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.
|
