|
EX80-Series insertion electromagnetic flowmeters are designed for use with conductive liquids in 1-10” pipe. They are highly suitable for difficult applications with changing viscosities and pulsating flows such as air-driven diaphragm pumps. With no moving parts, these meters can be used in “dirty” applications where debris would foul a mechanical meter. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments.
Designed for modularity and versatility, the EX80-Series has a current-sinking pulse output that can be combined with the appropriate transmitter or indicator for the application. For analog output and display of rate and total, an FT420 can be used. For analog only, the AO55 can be mounted directly onto the meter. The PD10 can be used to divide the pulse for pacing chemical metering pumps. The DL75 (data logger) and FT520 (batching flow processor) are also compatible. If the EX80-Series meter is being used with a programmable controller, the output signal can be fed direct, with no other conditioning required.
The EX80-Series fixed depth insertion meters require special fittings. Factory installation in the fitting ensures correct depth placement in the pipe. The EX80-Series meter can be ordered in a full power model when a source of electricity is available, or in a low power model that can run on an external battery with solar panel.
Reverse flow output and immersibility are optional.
- Low-flow performance and accuracy superior to any mechanical flow sensor
- No moving parts to wear out
- Dedicated fittings for simple installation
- Retainer clip automatically sets correct depth
- Meter extends only ~1/8 of pipe diameter, minimizing potential for clogging with debris
- Simple pulse train output can be used with any SeaMetrics signal processing module, or sent directly to a PLC
- Available for pipe sizes 1" to 10", in Brass, 316 Stainless, PVC, and CPVC
Specifications
Instructions
|
|
