Programmable
Digital Temperature Indicator and Data Logger Doric 5000 Series
of single and multiple channel digital temperature indicators
sets a new standard for performance, features, value and reliability.
With built-in programmability, RS232 serial communications
and powerful Windows-based software, the Doric 5000 is ideal
for monitoring, testing and process control
applications.
Complete configuration of the instrument can be quickly performed
from the front panel, including sensor input type, sampling
rate, limit settings, and resolution. Current value and min/max
values can be selected for display from the front panel.
Thanks to its exclusive Viewer software, the Programmable
Digital Temperature Indicator and Data Logger Doric 5000 Series
becomes a powerful PC-based data gathering, display and logging
system. All front panel setup commands can be executed from
your PC and all channel data, limit/alarm status and min/max
values can be viewed simultaneously. In addition, you can
label channel data, perform engineering unit calculations,
log data and create exportable data files.
With the multiple inputs option installed,
the Programmable
Digital Temperature Indicator and Data Logger Doric 5000 Series
provides simultaneous monitoring of up to six thermocouple
or three RTD channels.
On single input models,
an optional board may be installed which provides enhanced
alarm functions as well as a scalable, linearized 4-20ma/0-10V
analog output.
Multiple Inputs
Instead of the dual alarm/analog
output option, the Programmable
Digital Temperature Indicator and Data Logger Doric 5000
Series can be configured
to accept up to six thermocouples or three platinum RTDs.
All active inputs can be
manually selected or automatically scanned. A front panel
channel indicator accompanies the displayed data. Individual
limits can be assigned
to each channel. A built-in 5A rated form-C relay is energized
whenever the limit on
the selected channel is exceeded.
Analog Output
Analog output capability
is also available in combination with the dual alarm option.
A linearized output (4-20mA or 0-10V) with fully adjustable
zero and span allows the
instrument to serve as an indicating transmitter for a proportional
controller,
high-level input to a PC-based data converter or other recording
device.
Dual Alarms
With the dual alarm option
installed, the Programmable
Digital Temperature Indicator and Data Logger Doric 5000
Series can be configured
to perform on/off control functions as well as process monitoring.
Setpoints can be set for high, low or deviation. In addition,
hysteresis (deadband) and delay can be programmed into each
setpoint. Alarm conditions can be programmed for manual
acknowledgment or for automatic reset. The dual alarm option
comes equipped with two 5A rated form-C (NO/NC) relays,
one for each alarm setpoint and flashing display whenever
an alarm condition exists.
Features:
• Fully Programmable and Easy to Use
• 4-Digit Alphanumeric Display
• RS232 Serial Port (standard)
• Captures Min and Max Readings
• 6 Thermocouple Types / 2 RTD Types
• Selectable 0.1°/1° Resolution; °F/°C
• Scalable Analog Output Option
• Dual Alarm Option
• Multiple Input Option
5000
Indicator/Data Logger
