 |
 |
|
Before
|
After
|
As a Plant Manager or Maintenance Engineer you already know that water scale on any heat transfer surface reduces the effectiveness of that heat transfer. This results in reduced equipment efficiency while increasing energy consumption, increasing costs and even increasing plant downtime.
In the past removing scale has been a major problem. Mechanical removal requires extensive downtime while the item of equipment is disassembled, then re-assembled. And corrosive acid cleaners, such as concentrated hydrochloric acid, raise occupational health and safety concerns and disposal problems. Not to mention the significant risk of long-term detrimental impact on plant life from metal loss
Now there is a safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. From industrial plants to land mark buildings to marine. Dynamic Descaler is a new technology descaler specifically formulated to rapidly clean mineral scale from passages in water-cooled or heated equipment.
Dynamic Descaler improves:
Dynamic Descaler is the trade name for a revolutionary Biodegradable Descaler that is designed to dissolve the toughest water scale, mud and rust deposits from any water-based equipment and piping.
Dynamic Descaler Biodegradable Descaler
Dynamic Descaler does not corrode, pit, erode or have any other harmful effects on materials and metals such as; STEEL, IRON, BRASS, COPPER, PLASTIC, FIBER, TEFLON or other metals or materials found in water-based systems or equipment. You can clean your equipment IN-SITU (and sometimes without shutting down the machine).
Simple and Effective
Dynamic Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. Because Dynamic Descaler is free rinsing you do not need to neutralize or pacify the system. The uniqueness of Dynamic Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.
Why Use Dynamic Descaler?
- It is a safe non-toxic, biodegradable chemical to be used on the waterside of heat transfer equipment.
- You do not have to heat Dynamic Descaler.
- Dynamic Descaler is safer for the employees to use than other acid products.
- Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
- Cleans down to the original surface without pitting.
- Dynamic Descaler is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
- Dynamic Descaler will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
- Removing the scale build up allows your equipment to operate more efficiently with less down time.
Dynamic Descaler Applications
|
Automotive
|
Bottling
|
Chemicals
|
Closed Circuit Cooling
Dynamometers Extruders Molders Radiators Welders
|
CO2 Generators Heaters Exchangers Rinse Tanks Sterilizers and Washers
|
Dryers
Extruders Kettles Mixers Reactors Scrubbers Vacuum Pumps
|
|
Food
|
Manufacturing
|
Metals
|
-
Ice Machines Kathabars Refrigeration Equipment Steam Tables
|
Chillers Compressors Furnaces Quenchers Vacuum Pumps
|
Bearings Conveyors Fans Hearth & Vacuum Furnaces Shelters Sprays
|
|
Mining
|
Paper
|
Pharmaceutical
|
Bearings Conveyors Filters Presses Process Lines Radiators
|
Calendar Rolls Mill Rolls Caustic Lines Scrubbers Compressors Liquor Tanks Pulverizers Vacuum Pumps
|
Exchangers Loop Systems Kathabars Pumps Reactors Stills Sterilizers
|
|
Refinery
|
Rubber & Plastics
|
Steel
|
Compressors Converters Crackers Exchangers Piping Pumps
|
|
Bearings ConCast Units Generators Hearths Spangle Units Furnaces
|
|
Textile
|
Utilities
|
Other Applications
|
Air Washers Compressors Condensers Exchangers Extruders and Towers
|
Boilers Turbines Transformers Cooling Towers Air Compressors Hydrogen Coolers Lube Oil Heat Exchangers
|
Ball Mills Demisters Evaporators Locomotives Absorption Units Diesel Generators Induction Furnaces
|
Comparative Analysis of Dynamic Descaler
Corrosion Testing According To ASTM G31
Units are mils per year (MPY)
| |
Dynamic Descaler
(Bio D'Scale)
|
Competitor
|
|
Bronze
|
4.57
|
10.1
|
|
90/10 Cu/Ni
|
5.83
|
11.1
|
|
70/30 Cu/Ni
|
5.83
|
6.64
|
|
90/10 Cu/Ni W
|
n/a
|
n/a
|
As you can see the corrosion rates of Dynamic Descaler are substantially lower than the competition. The above corrosion rates are according to the U.S. Navy Commercial Item Description (CID) Heat Exchanger Cleaning Compound. The maximum corrosion rate is 20 mils per year (MPY).
Scale Dissolving Ability
Put one gram of Calcium Carbonate in fifty mls of cleaning compound.
Measure time to dissolve.
| |
Dynamic Descaler
(Bio D'Scale)
|
Competitor
|
|
Test 1
|
2 min. 51 sec.
|
3 min. 36 sec.
|
|
Test 2
|
3 min. 20 sec.
|
3 min. 28 sec.
|
|
Test 3
|
2 min. 49 sec.
|
3 min. 14 sec.
|
|
Average
|
3 min. 00 sec.
|
3 min. 26 sec.
|
Scale dissolving ability is a test that measures how fast the descaler will dissolve scale. The results show that Dynamic Descaler dissolved the calcium carbonate, which is the primary compound in boiler scale, much faster than our competitor.
Scale Neutralizing Ability
In pounds dissolved per gallon of cleaning compound.
| |
Dynamic Descaler
(Bio D'Scale)
|
Competitor
|
|
Test 1
|
2.50
|
1.78
|
|
Test 2
|
2.88
|
1.75
|
|
Test 3
|
2.42
|
1.48
|
|
Average
|
2.60
|
1.67
|
Scale neutralizing ability is a titration that measures how much the descaler solution can dissolve. The maximum time allowed for this analysis is 1 hour. Dynamic Descaler dissolves 56% more scale than our competitor.
(See dramatic video presentation)
The Perfect Solution To Your Water Scale Problems!
|
