Note: CRN available on a variety of valves. Please contact us for price and availability.
*Pressures under 15 PSIG require rubber elastomeric diaphragm.
Note: CRN is available on certain valves. Please contact factory for price and availability.
Flanged Valve TOP VALVE Series: (Plastic)
This series incorporates 150# socket-welded flanges on PVC and CPVC valves and threaded 150# companion flanges on polypropylene, PVDF and Teflon valves.
Flange sizes from 1/4” to 2” available.
Flanged TOP VALVE Series: (Metallic Valve Bodies)
This series incorporates 150# weld neck flanges on all
metallic valve bodies. Valve top material available in PVC,
CPVC (Corzan).
These flanged valves are also available in the High
Temperature and High Pressure Series.
Flanged TOP VALVE Series: (All Metallic)
This series incorporates either an aluminum or 316 stainless steel top on a metallic body constructed of 316L, Alloy 20, Hastelloy C or titanium.
These flanged valves are also available in the High Temperature and High Pressure Series.
High Pressure TOP VALVE Series (only available with metallic body)
pressure range 50 to 350 PSIG
this series incorporates a standard aluminum metallic top, viton diaphragm,
high pressure spring with three standard choices of metallic wetted bottom
standard body materials available are 316L stainless steel, Alloy 20 or
Hastelloy C; other metallic bodies available on request
standard metallic top is aluminum with optional 316L stainless material
available
standard diaphragm material is Viton with optional materials available
valve is available in three styles: BH back pressure 2 port design;
PH pressure relief 3 port in-line design; P2H pressure relief off-line design
valves available in various configurations that include threaded, socket and
flanged
High Temperature TOP VALVE Series (for applications above 140°F/ 60°C)
temperature limit of this valve is dependent on body material selection to a maximum of 300°F (149°C)
this series incorporates a standard aluminum metallic top, viton diaphragm, high pressure spring with
three standard choices of metallic wetted bottom
standard body materials available are 316L stainless steel, Alloy 20 or Hastelloy C, all rated to the
maximum temperature; other metallic bodies available on request
optional body materials available are CPVC (Corzan) and PVDF; these have limited pressure versus
temperature ratings and the factory should be consulted to ensure proper selection
standard diaphragm material is Viton with optional materials available
standard metallic top is aluminum with optonal 316L stainless steel available
valve is available in three styles: BH back pressure 2 port design; PH pressure relief 3 port in-line design;
P2H pressure relief off-line design
valves available in various configurations that include threaded, socket and flanged
Back Pressure Valves & Pressure Relief Valves TOP VALVE
Dimensional Information
Dimensions are approximate for overall height based on valve factory set at 50 PSIG
** For pressure relief plastic body valves add 0.25" to dimensions
"A" and "D" except 1 1/2" size
Note:
Dimensions are the same for standard back pressure and pressure relief valves except as indicated above.
Back Pressure Valves & Pressure Relief Valves TOP VALVE
Flow Rates
Flow capacity through TOP VALVE Back Pressure Valves/anti-siphon and Pressure Relief Valves under continuous flow conditions @ 50 PSIG with ambient temperature water.
Note:
Capacities will increase with pressure. If pressure is doubled, flow rate will approximately double. For capacities of valves with pulsating flow, use approximately 1/3 of the given flow rates.
