Heat Exchangers - Compact Cabinet Coolers

• Cool electronics to slightly above the outside ambient air temperature with our air-to-air models, or install one of our air-to-water units for below ambient cooling.
• Maintain a NEMA 12 air and dust tight seal with standard models. NEMA 3R, 4 or 4X can be maintained with other models.
• Air is circulated inside the cabinet to keep hot spots from forming.
• Flange and neoprene gasket keep contaminants out - ideal for dusty and dirty environments. No outside air enters the enclosure - EVER!
• NEMA 4/4X models include wash down fans, allowing for safe hose down or sterilization processes to continue.
• Corrosion resistant coatings and optional stainless steel construction protect against damage from harsh or corrosive environments.
• Easy to install on the top, sides, front or back of your panel or enclosure. One person can easily install in one hour in most applications.
• Energy efficient and low power requirement, no new electrical is needed.
• UL/cUL Listed models available for 508a applications.
  Freon free!

Drop In Heat Exchangers

Drop in air-to-air Heat Exchangers remove waste heat from sealed electrical panels and enclosures using Noren heat pipe technology. Our design dissipates heat from sensitive electronic components without exposing them to the harsh dirty environment outside the cabinet. Drop in models extend into the panel from the side, top, front or back, but minimize the external footprint.

Flush Mount Heat Exchangers

Flush mount Compact Cabinet Coolers remove waste heat from sealed electrical panels and enclosures using Noren heat pipe technology. Our design dissipates heat from sensitive electronic components without exposing them to the harsh and dirty environment outside the cabinet. Common mounting locations for these units are side, front or back as high as possible on the enclosure and with no intrusion into the enclosure.

Air-to-Water Heat Exchangers

Air-to-water units remove waste heat from sealed electrical panels and enclosures, even to below ambient temperature, depending on the temperature of the water supply. Our design dissipates heat from sensitive electronic components without exposing them to the harsh and dirty environment outside the cabinet. There are no fans or fins exposed to the outside environment, thus no cleaning required.

Heat Exchanger Brochure