|
|
FuzyPro Desk Top Lab Controllers
The New FuzyPro Desk Top Lab Controller features high current capacity of 10 Amps or higher. SCR control 0.5 sec cycle time with High Alarm 2 Pole RELAY. 24 VDC, 120, 208, 240 Volts, 1 Phase operation available. Percentage Power Control 0 to 100% from front PANEL if enabled. The unit has a Power Supply of AC 85 to 265 Volts 50/60 Hz with Power Consumption: About 4 VA for controls and Display Accuracy: Within 0.2% of displayed value + 1 digit.
|
|
|
Shinko JIR-301-M 1/8 DIN Digital Indicator
Shinko JIR-301-M 1/8 DIN Digital Indicator, is available in a standard 1/8 DIN NEMA 4X protective enclosure. All units feature dual display. PV red 4 digits, Alarm SV green 4 digits. All JIR-301-M 1/8 DIN Digital Indicators have true multi-input capabilities: 10 thermocouple types, 2 RTD types, 2 current inputs, and 4 voltage inputs and feature feature standard three alarm outputs.
|
|
|
Extruder Rupture Disks
ONEhalf20
Extruder Rupture Disks
(Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery. Offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI.
ONEhalf20
Extruder Rupture Disks (Burst Plugs) are offered with several mounting thread styles that are commonly found on plastics processing machinery.
|
|
|
Portaflow PT500 Transit Time Flow Meter
Measure flow from outside a pipe. This new Portaflow PT500 Transit Time Flow Meter is designed for clean liquids like water, oils and most chemicals. Recommended for troubleshooting, spot checks and balancing flow. Clamp-on sensors mount on the outside of plastic or metal pipes and ultrasonic signals are injected through the pipe between the two sensors. It works on any pipe diameter from 0.51 to 78” (13-2000 mm) OD.
Greyline PT500 features include a large, backlit graphics display, 4-20mA output, data logger, RS232 and USB outputs, a user-friendly operating system with “Quick Start” calibration menu, plus ability to store calibrations for up to 20 different sites. It operates 16 hours on internal battery and recharges overnight.
|
|
|
GPI Hand Pumps
At GPI we’ve improved our selection of hand pumps to fit nearly every customer application. All of our hand pumps are portable, quick to install, and reduce lifting and messy fluid transfer. All you have to do is decide which method of transfer you prefer.
Deluxe Hand Pumps move fluid on both the push and pull stroke for the fastest fuel transfer in the hand pump line. Rotary Hand Pumps deliver 8 to 10 gallons per 90 to 100 revolutions. Basic Hand Pumps are portable and easy to install.
|
|
|
Air Release Valves
The "Saar" D-020 combination air valve for sewage combines a Kinetic large orifice and an automatic small orifice in a single body. The valve is specially designed to operate with liquids carrying solid particles such as wastewater and effluent.
The "Saar" D-020 combination air valve for sewage discharges air, gases and vapor during the filling or charging of the system and while operating under pressure and admits air to the system while being drained. The valve's unique design guarantees complete separation between the liquid and the sealing mechanism and provides optimum work conditions.
|
|
|
Roll Handling Cart
The TL800 Roll Handling Cart is designed for efficient, safe and ergonomically sound transportation of rolled material. Capacity up to 800 pounds depending on the configuration of the load. Machine weight is 260 pounds without attachments.
- Structural Steel Frame
- High Capacity Nylon Wheels
- Brakes for Rear Castors
|
|
|
Carlon JSJ Electric Contacting Industrial Meters
Carlon JSJ Electric Contacting Industrial Meters measure the water and provide a switch closure each time the pre-set amount of water passes through the meter. This signal can be used to actuate pumps, valves, alarms or other equipment involved in the processing system. These all bronze case meters are of the popular Carlon time-proven design…equipped with a cam actuated normally open 10 amp micro-switch and totalizing register.
|
|
|
X-StreamTM Air-BladeTM Air Knife
X-StreamTM Air-BladeTM Air Knife is easy to mount and maintain and reduces both compressed air consumption and noise levels. It is the most efficient design yet achieved for air knife curtain blow-off technology for reducing noise levels yet providing the optimum in blow-off energy.
The X-StreamTM Air-BladeTM Air Knife produces a “laminar” flow of air along its length using the ”Coanda” effect which “entrains” a large volume of air from the surrounding area along with the small amount of compressed air from the air knife to produce an output flow up to 40 times.
|
|
|
Corporation Stops
Corporation Stops have been designed to inject chemicals into the center stream of the flow. An isolation valve allows for ease of maintenance.
Corporation Stops are available in 6 materials of construction. Wetted components have comparable or greater chemical resistance than quill construction material. Corporation Stops are available in standard and custom lengths. Connections are in NPT, Metric or flange.
|
|
|
Air Conveyors - Ring-Vac™ Pneumatic Conveying System
Air Conveyors - Ring-Vac™ Pneumatic Conveying System has virtually no moving parts, conveys air at high rates and long distances. Utilizing compressed air for a powerful, efficient venturi action along its length in a compact design for high capacity conveying over large distances. System is available in both coated aluminum or high temperature stainless steel. Simply clamp a standard hose size to each end of the Ring-Vac™ to create this high energy conveying system. No moving parts for maintenance free operation with capacity and flow controlled with a pressure regulator.
|
|
|
Trident Universal Input Digital Panel Meter
The Model PD765 Trident digital panel meter is one of the most versatile digital panel meters on the market and will satisfy a wide variety of process applications. The Trident can be field programmed to accept process voltage (0-5V, 1-5V, etc) and current (4-20 mA) inputs, 100 Ohm RTDs, and the four most common thermocouples. It is housed in a shallow-depth, 1/8 DIN enclosure that features a NEMA 4X front panel and convenient mounting hardware. There are two power options for the Trident: 85 to 265 VAC or 12-36 VDC and it can provide 24 VDC to power the transmitter if needed. Programming and setup can be performed with the four front panel pushbuttons, free MeterView software, or using the Copy function.
|
|
|
Plastic Diaphragm Valves - Type 14/15 and Type 72 Series
The Chemline Type 14 (1/2" to 4") and Type 15 (5" and 6") Diaphragm Valves are an improved version of the older DV Series. The 8" and 10" DV’s are still current design but are now called Type 72. Types 14 and 15 have been redesigned using modern computer design technology. Improvements are higher pressure resistance, lower hand wheel torques to close, better hydraulics (lower pressure losses) and other features. Tests show Type 14 to outperform major competitors in resistance to bonnet leakage on tough applications with thermal cycling.
|
|
|
Pump Controllers
Ktech Industrial Products Inc., Pump Controllers are installed to automatically operate a pump to control the level of a liquid in a tank. Pump Controllers are used in conjunction with Ktech Multi-Level Float Switches. Use two contacts to start and stop the pump. A relay circuit switches power to the fractional horsepower pump motor or to the three-phase contactor of a large pump motor. Similarly, the switch contacts can be used to operate solenoid valves.
|
|
|
Programmable Digital Temperature Indicator and Data Logger
Programmable Digital Temperature Indicator and Data Logger Doric 5000 Series of single and multiple channel digital temperature indicators sets a new standard for performance, features, value and reliability. With built-in programmability, RS232 serial communications and powerful Windows-based software, the Doric 5000 is ideal for monitoring, testing and process control applications. Complete configuration of the instrument can be quickly performed from the front panel, including sensor input type, sampling rate, limit settings, and resolution. Current value and min/max values can be selected for display from the front panel.
|
|
|
Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.
|
|
|
Process Controls And Instrumentation News Is Now On Facebook
Process Controls and Instrumentation is now on Facebook showing product links to the worlds leading manufacturers and suppliers of process control and instrumentation equipment. Be sure to click on the Like Button on the page.
|
