|
|
EasyLog EL-USB-2 - Humidity, Temperature and Dew Point Data Logger
This standalone data logger measures and stores up to 16,379 relative humidity and 16,379 temperature readings over 0 to 100%RH and -35 to +80°C (-31 to +176°F) measurement ranges. The user can easily set up the logger and view downloaded data by plugging the data logger into a PC’s USB port and using the supplied software. Relative humidity, temperature and dew point (the temperature at which water vapour present in the air begins to condense) data can then be graphed, printed and exported to other applications.
|
|
|
New Ultrasonic Level & Flow Monitor
This new SLT 5.0 Level & Flow Monitor from Greyline Instruments features a non-contacting ultrasonic sensor and a simple 5-key calibration system. The SLT 5.0 can be used as a level transmitter for tank inventory monitoring, pump control for sewage lift stations, or as an open channel flow monitor with display and totalizer.
It includes a large backlit LCD display, isolated 4-20mA output, and two control relays for pump On/Off control, pump alternation, level alarms and/or flow proportionate pulse.
|
|
|
Melt Pressure Measurement Products
ONEhalf20 is a recognized leader in pressure and temperature measurement solutions for the polymer, food, medical, and chemical extrusion processing industries. Melt pressure measurement is critical to improving processing efficiency, safety and finished goods product quality.
|
|
|
WebMaster® Industrial (WIND) Controller
Walchem's WebMaster® Industrial (WIND) Controller sets a new standard for Industrial Water treatmentControllers. The WIND has a flexible multi-I/O platform, a wide rangeof analytical sensor measurement capabilities, and an extensive assortmentof integrated communications and data handling features.
|
|
|
Bag Filter Housings, Bag Filter Systems, Bag Filters
Pelmar Engineering offers a complete line of Arctic Bag Filter Housings to fulfill all your bag filtration needs. Our Bag Filter Housings are manufactured in a strict quality controlled environment. The designs are based on many years of industrial experience and provide maximum efficiency and reliability. The line includes both Over The Top (OT) and side Entry (SE) designs, four sizes P1 through P4 and three materials Carbon Steel, 304SS and 316SS.
|
|
|
Vortex Tubes – a unique spot cooling device using no electricity
The vortex tube is unique technology that takes compressed air divides it into two flows - one end of the tube gets hot and the other tube gets cold. It was a little known technology 30 years ago but now is commonly used in several types of useful devices.
Compressed air, typically at 80-to 100 PSlG enters the vortex tube from the side at a tangent and enters through the generator into the tube, causing the air to spin. This air stream spins toward the hot end where some leaves the tube via the control valve. The remaining, spinning air travels back up the center of the tube. The inner spinning stream gives off heat energy to the outer stream (which leaves the tube at the hot end as hot air) and exits the vortex tube at the cold end as cooled air. The input air is literally split into hot and cold and can be quite extreme in range.
|
|
|
Pulsatron Electronic Metering Pumps from Pulsafeeder
The PULSAtron Series A Plus Electronic Metering Pumps offer manual control over stroke rate and stroke length as standard with the option to select external pacer for automatic control. Six distinct models are available, having pressure capabilities to 250 PSIG, and flow capacities to 48 GPD, with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 3% of maximum capacity.
|
|
|
Air-BladeTM
Air Knife Blow Off System
Air-BladeTM Air Knife Blow Off System from Nex FlowTM is easy to mount and maintain and reduces both compressed air consumption and noise levels.
Air-BladeTM Air Knife Blow Off System produces a “laminar” flow of air along its length using the ”Coanda” effect which “entrains” a large volume of air from the surrounding area along with the small amount of compressed air from the Air-BladeTM to produce an output flow up to 30 times.
System payback on compressed air savings can be as soon as a few weeks in some applications.
|
|
|
CS Corporation Stops
CS Corporation Stops have been designed to inject chemical into the center stream of the flow. Available in 7 materials of construction: brass, PVC, CPVC, PVDF, Stainless Steel, Alloy 20 and Hastelloy. Quill diameter sizes range from 1/4" (DN 8) to 2-1/2" (DN 65). They are available in the following sizes 1/2" (DN 15) to 3" (DN 75) with threated, socket or flanged connections.
|
|
|
Roll Handling Cart
The TL800 Roll Handling Cart is designed for efficient, safe and ergonomically sound transportation of rolled material. Capacity up to 800 pounds depending on the configuration of the load. Machine weight is 260 pounds without attachments.
- Structural Steel Frame
- High Capacity Nylon Wheels
- Brakes for Rear Castors
|
|
|
NSF-61 Certified Butterfly Valves
Chemline's Type 57 all-plastic elastomer seated butterfly valve is now NSF-61 certified for application in potable water services. All-plastic construction offers perfect corrosion resistance at low cost. Standard materials are PVC body, PP disc and EPDM seat. Other materials are available if needed for higher working temperatures or chemical resistance. Sizes are 1-1/2" to 24". The valves feature bubble tight seating, low stem torques and long seat life due to the engineered spherical seat/disc design. Shaft torques are unaffected by flange bolt torques. The streamlined disc provides high Cv values and good flow control. The rugged lockable handlever has multiple teeth engagement for high strength against torque loads and fine flow adjustment. Operators are hand lever, gear operators, pneumatic or electric actuators. The new corrosion-free "PlasGear" manual gear operators are made of fiber glass. A choice of shaft extensions is available to extend operators to any height.
|
|
|
Static Weighing With Ramsey Micro-Tech 3000 Series
The Ramsey Micro-Tech 3000 Series of electronic instruments signifies a new approach to scale instrumentation, giving you more flexibility and vastly increased upgrade capabilities. Each model is designed for your specific weighing application, and because all models utilize a common platform, you only need to become familiar with one basic interface.
|
|
|
Programmable Digital Temperature Indicator and Data Logger
Programmable Digital Temperature Indicator and Data Logger Doric 5000 Series of single and multiple channel digital temperature indicators sets a new standard for performance, features, value and reliability. With built-in programmability, RS232 serial communications and powerful Windows-based software, the Doric 5000 is ideal for monitoring, testing and process control applications. Complete configuration of the instrument can be quickly performed from the front panel, including sensor input type, sampling rate, limit settings, and resolution. Current value and min/max values can be selected for display from the front panel.
|
|
|
Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.
|
|
|
Process Controls And Instrumentation News Is Now On Facebook
Process Controls and Instrumentation is now on Facebook showing product links to the worlds leading manufacturers and suppliers of process control and instrumentation equipment. Be sure to click on the Like Button on the page.
|
