www.process-news.com

April 19, 2011   
Having trouble reading this e-mail? View It Online

Gas Leak Detectors

 
Gas Leak Detectors

Gas detector Peaker 3000 flex is a multi range gas detector, which is equipped with a selective gas sensor series GGS 3000 for methane (CH4), but is also suitable for the detection of propane gas (C3H8) und hydrogen (H2). The detection range is from a few ppm up to the “Lower Explosive Limit (LEL)”, which are stored for the different gases in the micro processor and can be called off. Leak detection for the different gases is carried out with a single sensor. Gas detector Peaker 3000 flex is not designed to be a measuring device. Peaker is a gas leak detector and should not be used a personal protection instrument!

 
Portaflow PT500 Transit Time Flow Meter

 
Portaflow PT500 Transit Time Flow Meter

Measure flow from outside a pipe. This new Portaflow PT500 Transit Time Flow Meter is designed for clean liquids like water, oils and most chemicals. Recommended for troubleshooting, spot checks and balancing flow. Clamp-on sensors mount on the outside of plastic or metal pipes and ultrasonic signals are injected through the pipe between the two sensors. It works on any pipe diameter from 0.51 to 78” (13-2000 mm) OD.

Greyline PT500 features include a large, backlit graphics display, 4-20mA output, data logger, RS232 and USB outputs, a user-friendly operating system with “Quick Start” calibration menu, plus ability to store calibrations for up to 20 different sites. It operates 16 hours on internal battery and recharges overnight.

 
Pressure Indication Solutions

 
Pressure Indication Solutions

ONEhalf20 is a recognized leader in pressure indicator solutions for the polymer, food, medical, and chemical extrusion processing industries. Pressure Indicators are critical to improving processing efficiency, safety and finished goods product quality. Units are available in 1/4 and 1/8 DIN panel mount configurations.

 
LMI Series AA, B & C Chemical Metering Pumps
 


LMI Series AA, B & C Chemical Metering Pumps

LMI Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Encapsulated electronics and a rigid housing and stroke bracket ensure years of precise, repeatable performance. Several control options are available for all applications and budgets.

 
 
VortexAC Cabinet Panel Coolers

 
VortexAC Cabinet Panel Coolers For Electrical Enclosures

Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!

This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1.5” knockout hole to keep electrical control panels cool, clean and protected.

  
 
Biodegradable Descaler
Before
Dynamic Descaler
After

 
Biodegradable Dynamic Descaler

Dynamic Descaler does not corrode, pit, erode or have any other harmful effects on materials and metals such as; STEEL, IRON, BRASS, COPPER, PLASTIC, FIBER, TEFLON or other metals or materials found in water-based systems or equipment.You can clean your equipment IN-SITU (and sometimes without shutting down the machine). Dynamic Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning.

Because Dynamic Descaler is free rinsing you do not need to neutralize or pacify the system.

 
Carlon JSJ Electric Contacting Industrial Meters

 
Carlon JSJ Electric Contacting Industrial Meters

Carlon JSJ Electric Contacting Industrial Meters measure the water and provide a switch closure each time the pre-set amount of water passes through the meter. This signal can be used to actuate pumps, valves, alarms or other equipment involved in the processing system. These all bronze case meters are of the popular Carlon time-proven design…equipped with a cam actuated normally open 10 amp micro-switch and totalizing register.

 
PANEL COOLERS

 
Nex FlowTM Frigid-XTM Panel Coolers

Nex FlowTM Frigid-XTM vortex tube panel coolers not only have major advantages over other cooling options but also over many other systems using vortex tubes. A vortex tube operates using compressed air only, dividing up the air into a hot and a cold stream with no moving parts. The cold air flow produced is used is directed into the enclosure to air condition the control cabinet.

The Frigid-XTM panel coolers has a built-in exhaust to vent the displaced hot air from inside the enclosure, so no separate vent is needed. This creates a slightly positive pressure inside the cabinet to purge the unit and keep out dirt, dust and debris.

 
Top Valve - Back Pressure/Pressure Relief Valves

 
Top Valve - Back Pressure/Pressure Relief Valves

A new line of diaphragm style back pressure valves and pressure relief valves named TOP VALVE, has been introduced by Primary Fluid Systems Inc. New features include a completely adjustable pressure range of 15-150 PSIG* and a built-in air release to reduce priming difficulties with metering pumps.

TOP VALVE Back Pressure Valves and Pressure Relief Valves are available in seven sizes, 1/4" through 2" NPT and eight (8) materials of wetted construction. The seat design of this new line of valves greatly extends the normal life expectancy of the diaphragm.

 
Static Control Products

 
Vortex Tubes – a unique spot cooling device using no electricity

The vortex tube is unique technology that takes compressed air divides it into two flows - one end of the tube gets hot and the other tube gets cold. It was a little known technology 30 years ago but now is commonly used in several types of useful devices.

Compressed air, typically at 80-to 100 PSlG enters the vortex tube from the side at a tangent and enters through the generator into the tube, causing the air to spin. This air stream spins toward the hot end where some leaves the tube via the control valve. The remaining, spinning air travels back up the center of the tube. The inner spinning stream gives off heat energy to the outer stream (which leaves the tube at the hot end as hot air) and exits the vortex tube at the cold end as cooled air. The input air is literally split into hot and cold and can be quite extreme in range.

 
Plastic Diaphragm Valves - Type 14/15 and Type 72 Series

 
Plastic Diaphragm Valves - Type 14/15 and Type 72 Series

The Chemline Type 14 (1/2" to 4") and Type 15 (5" and 6") Diaphragm Valves are an improved version of the older DV Series. The 8" and 10" DV’s are still current design but are now called Type 72. Types 14 and 15 have been redesigned using modern computer design technology. Improvements are higher pressure resistance, lower hand wheel torques to close, better hydraulics (lower pressure losses) and other features. Tests show Type 14 to outperform major competitors in resistance to bonnet leakage on tough applications with thermal cycling.

 
Liquid Level Float Switches

 
Liquid Level Float Switches

Liquid Level Float Switches from Ktech Industrial Products Inc., Are top-mounted with between one and four setpoints. A single point sensor may be used to provide a highor low level alarm contact.

Liquid Level Float Switches are factory-sealed and explosion-proof. They are approved for hazardous locations, Class 1, Division 1, Groups B, C, D. Explosion-proof housings are an optional accessory.

 
Ashcroft Pressure Transducers And Pressure Transmitters

 
Ashcroft Pressure Transducers And Pressure Transmitters

Ashcroft pressure transducers and pressure transmitters from Intertechnology Inc., provides a full line of pressure transducers and pressure transmitters with typical output signals from pressure transducers of 4-20 mA, 1-5 VDC, 1-6 VDC, 0-5 VDC, 0-10 VDC. Products range from low range differential pressure transducers to rugged high pressure explosion-proof transducers for use in extreme applications.

 

 
Process Controls And Instrumentation Advertising Opportunities

Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

 

 
Process Controls And Instrumentation News Is Now On Facebook

Process Controls and Instrumentation is now on Facebook showing product links to the worlds leading manufacturers and suppliers of process control and instrumentation equipment. Be sure to click on the Like Button on the page.


Visit the Process Controls And Instrumentation web site and view over
11,000 pages of product information from manufacturers and their representatives.

These news releases from Process News are sent to those who wish
to be kept informed of new products via email.


  www.process-news.com

April 19, 2011