EasyLog EL-USB-2 - Humidity, Temperature and Dew Point Data Logger

This standalone data logger measures and stores up to 16,379 relative humidity and 16,379 temperature readings over 0 to 100%RH and -35 to +80°C (-31 to +176°F) measurement ranges. The user can easily set up the logger and view downloaded data by plugging the data logger into a PC’s USB port and using the supplied software. Relative humidity, temperature and dew point (the temperature at which water vapour present in the air begins to condense) data can then be graphed, printed and exported to other applications.

 
Portaflow PT500 Transit Time Flow Meter

Measure flow from outside a pipe. This new Portaflow PT500 Transit Time Flow Meter is designed for clean liquids like water, oils and most chemicals. Recommended for troubleshooting, spot checks and balancing flow. Clamp-on sensors mount on the outside of plastic or metal pipes and ultrasonic signals are injected through the pipe between the two sensors. It works on any pipe diameter from 0.51 to 78” (13-2000 mm) OD.

Greyline PT500 features include a large, backlit graphics display, 4-20mA output, data logger, RS232 and USB outputs, a user-friendly operating system with “Quick Start” calibration menu, plus ability to store calibrations for up to 20 different sites. It operates 16 hours on internal battery and recharges overnight.

Corrosion Monitoring Instruments

The MS1500E is a hand-held, battery-powered, corrosion meter capable of measuring and storing data from all types of electrical resistance (ER) corrosion probes. The instrument is light weight, microprocessor-based, and features a simple, menu-driven interface using a 12-key keypad and a 4-line LCD display.

Corrosion rate measurements are made using the electrical resistance method. Essentially, the instrument measures the resistance of the probe element which changes over time, as metal loss occurs. The rate of change is directly proportional to corrosion rate. This method finds a wide variety of applications since it can be used in conductive and nonconductive environments such as petroleum, chemical, water, soil, or even atmosphere.

 
Pressure Indication Solutions

ONEhalf20 is a recognized leader in pressure indicator solutions for the polymer, food, medical, and chemical extrusion processing industries. Pressure Indicators are critical to improving processing efficiency, safety and finished goods product quality. Units are available in 1/4 and 1/8 DIN panel mount configurations.

 
Nex Flow^TM SILENT X-STREAM^TM FRIGIDX-X^TM Panel Cooler Prevents Costly Shutdowns From Over Heating Electrical And Electronic Panels

Silent X-Stream^TM Cabinet Enclosure Cooler/Cooling- Frigid-X^TM series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.

There are Three (3) Types of Panel Coolers to choose from:

Silent X-Stream^TM Frigid-X^TM Cabinet Panel Coolers NEMA Type 12 For Electronic Control Panels for General use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments.

Silent X-Stream^TM Frigid-X^TM Cabinet Panel Coolers NEMA Type 3R For Electronic Control Panels for Outdoor Use. Stainless steel to hold up to rain, snow, humidity and general outdoor use.

Silent X-Stream^TM Frigid-X^TM Panel Coolers NEMA Type 4-4X For Electronic Control Panels - splash resistant, for use in wash down environments as well as outdoor use. Unique patent pending design for secure water tight protection. Stainless steel for food service and corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use.

ULTRAMETER II - Portable Handheld Conductivity, Resistivity, pH, ORP, TDS, Temperature Measuring Instrument

Both Ultrameter II models deliver performance of ±1% of reading (not merely full scale). This high level of accuracy has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor and powerful microprocessor based circuitry. With displayed values of up to 9999, the full four-digit LCD ensures resolution levels never before possible in such affordable instruments. Factory calibrated with NIST traceable solutions, each Ultrameter II may be supplied with both certification of traceability and NIST traceable solutions for definitive calibration.

 
Air Release Valves

The "Saar" D-020 combination air valve for sewage combines a Kinetic large orifice and an automatic small orifice in a single body.  The valve is specially designed to operate with liquids carrying solid particles such as wastewater and effluent.

The "Saar" D-020 combination air valve for sewage discharges air, gases and vapor during the filling or charging of the system and while operating under pressure and admits air to the system while being drained.  The valve's unique design guarantees complete separation between the liquid and the sealing mechanism and provides optimum work conditions.

 
Eco Valve Back Pressure Valves and Pressure Relief Valves

Eco Valve Back Pressure Valves and Pressure Relief Valves are ideal for metering pump/chemical dosing applications. They are designed for long life and ease of installation and maintenance with an exceptional 3 year warranty. Available in PVC, CPVC, PVDF, polypropylene and 316L stainless steel. Designed to be used as a two port off line pressure relief valve to help protect the discharge side of positive displacement pumps from system failure due to over pressure caused by a blockage or accidental valve closure on the downstream side of the pump.

 
Vortex Tubes – a unique spot cooling device using no electricity

The vortex tube is unique technology that takes compressed air divides it into two flows - one end of the tube gets hot and the other tube gets cold. It was a little known technology 30 years ago but now is commonly used in several types of useful devices.

Compressed air, typically at 80-to 100 PSlG enters the vortex tube from the side at a tangent and enters through the generator into the tube, causing the air to spin. This air stream spins toward the hot end where some leaves the tube via the control valve. The remaining, spinning air travels back up the center of the tube. The inner spinning stream gives off heat energy to the outer stream (which leaves the tube at the hot end as hot air) and exits the vortex tube at the cold end as cooled air. The input air is literally split into hot and cold and can be quite extreme in range.

 
SM Series Metering Ball Valves

SM Series Metering Ball Valves ½" to 2" in solid plastics are now available from Chemline Plastics. They are designed for fine linear flow control of chemicals or clean fluids through 180o rotation of the handle. The valves feature a solid ball with a special V-groove cut on the outside surface. Other features include union ends, full blocking design, double stem o-ring for safety and Teflon seats. The seats have elastomer cushions to provide low stem torques and automatic compensation for seat wear and expansion. The all-plastic construction (PVC or PP) offers high chemical resistance at low cost. Pressure rating for PVC valves is 230 psi; PP is rated at 150 psi. True Union socket end connections eliminate leakage problems common with threaded body valves. SM Series is available with an electric actuator with onboard positioner, making it an inexpensive electrically actuated proportional (linear) control valve.

 
Ramsey Mercury-Free Tilt Sensor

Now available in a mercury-free version, this sensor provides you with the stability, sensitivity and performance you have come to expect from the traditional Thermo Scientific Ramsey Tilt Switches. Designed to meet government regulations, the mercury-free tilt sensor helps you improve your efficiency while protecting your profits.

Designed to help you address environmental concerns and meet government regulations regarding mercury usage, the Thermo Scientific Ramsey Mercury-Free Tilt Sensor uses advanced technology inside the tilt probe to replicate the same performance found in traditional mercury-based Ramsey tilt switches.

 
Nex Flow^TM Frigid-X^TM Panel Coolers

Nex Flow^TM Frigid-X^TM vortex tube panel coolers not only have major advantages over other cooling options but also over many other systems using vortex tubes. A vortex tube operates using compressed air only, dividing up the air into a hot and a cold stream with no moving parts. The cold air flow produced is used is directed into the enclosure to air condition the control cabinet.

The Frigid-X^TM panel coolers has a built-in exhaust to vent the displaced hot air from inside the enclosure, so no separate vent is needed. This creates a slightly positive pressure inside the cabinet to purge the unit and keep out dirt, dust and debris.

 
Martel MC-1010 Multi-Function Process Calibrator

The Martel MC-1010 multi-function process calibrator will test continuity as well as read and source thermocouples, RTDs, Ohms, voltage, current, and frequency. The unit is compatible with BetaPort-P and Fluke 700 series pressure modules which expand its range to pressure applications. Results are shown of the high contrast ClearBrite graphic display which features a vivid white backlight that makes the display easy to read in all light conditions. Martel's easy to learn yet powerful 3 key menu structure provides a highly intuitive yet powerful operator interface. Learn more about all the Mat\rtel (Beta) line of calibrators.

 
Data Physics Corporation - Dynamic Signal Analyzers, Vibration Controllers, Electrodynamic Shakers

Data Physics is a leading manufacturer of signal processing solutions including dynamic signal analyzers, vibration controllers, shakers and accessories.

Since 1984, when Data Physics introduced the first vibration controller in a PC, Data Physics continues to introduce innovations in signal processing for the noise and vibration community. Building on the success of ABACUS and SignalCalc QUATTRO, the ultra-portable, cost effective signal analyzer, our SignalStar vibration controllers and SignalForce Shakers offer a new standard in performance and reliability.

 
Process Controls And Instrumentation Advertising Opportunities

Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

 
Process Controls And Instrumentation News Is Now On Facebook

Process Controls and Instrumentation is now on Facebook showing product links to the worlds leading manufacturers and suppliers of process control and instrumentation equipment. Be sure to click on the Like Button on the page.

  www.process-news.com