10 Channel Midi Logger GL220

Its compact size contains an isolated input system which ensures that signals are not corrupted by inputs to other channels, thus eliminating wiring concerns. The GL220s multi-type inputs are suitable for voltage, temperature, humidity, pulse, and logic signals, enabling combined measurements of different phenomena like temperature/humidity and voltage.

Provides faster sampling rates for voltage measurements. Can achieve 10ms sampling interval when limiting the number of channels in use.

 
Portaflow PT500 Transit Time Flow Meter

Measure flow from outside a pipe. This new Portaflow PT500 Transit Time Flow Meter is designed for clean liquids like water, oils and most chemicals. Recommended for troubleshooting, spot checks and balancing flow. Clamp-on sensors mount on the outside of plastic or metal pipes and ultrasonic signals are injected through the pipe between the two sensors. It works on any pipe diameter from 0.51 to 78” (13-2000 mm) OD.

Greyline PT500 features include a large, backlit graphics display, 4-20mA output, data logger, RS232 and USB outputs, a user-friendly operating system with “Quick Start” calibration menu, plus ability to store calibrations for up to 20 different sites. It operates 16 hours on internal battery and recharges overnight.

ULTRAMETER II - Portable Handheld Conductivity, Resistivity, pH, ORP, TDS, Temperature Measuring Instrument

Both Ultrameter II models deliver performance of ±1% of reading (not merely full scale). This high level of accuracy has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor and powerful microprocessor based circuitry. With displayed values of up to 9999, the full four-digit LCD ensures resolution levels never before possible in such affordable instruments. Factory calibrated with NIST traceable solutions, each Ultrameter II may be supplied with both certification of traceability and NIST traceable solutions for definitive calibration.

 
Extruder Rupture Disks

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery. Offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI.

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are offered with several mounting thread styles that are commonly found on plastics processing machinery.

 
SILENT X-STREAM^TM Dust Collection and Fume Extraction System

The versatile and affordable compact air cleaning system is ideal for the removal of fumes, dust and other air pollution from work stations without the need for heavy and bulky machinery.

The Nex FlowTM Stream VacTM is an in line air conveyor that when hooked up to a 2” hose and connected to a compressed air line, it will remove up to several hundred cubic feet of air while using only a minimal amount of compressed air, taking with it welding fumes, soldering fumes, particulate from local grinding operations, smoke and particulate from almost any “spot” application.

 
Ultrapen - PT1

The Ultrapen - PT1 is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include the ability to select from 3 different solution types that model the characteristics of the most commonly encountered types of water; proprietary temperature compensation and TDS conversion algorithms; highly stable microprocessor-based circuitry; user-intuitive design; and waterproof housing. A true, one-handed instrument, the PT1 is easy to calibrate and easy to use. To take a measurement, you simply press a button then dip the pen in solution. Results display in seconds.

 
VortexAC Cabinet Panel Coolers For Electrical Enclosures

Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!

This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1.5” knockout hole to keep electrical control panels cool, clean and protected.

 
WAHL Thermal Imagers z50 Inspector and z30 Detector

The choice is easy.
Wahl's NEW Thermal Imagers are the best tool for the job, and give you the flexibility you need for easy future updgrades!

• Ambient Temperature Changes won’t slow you down
• Every Pixel Calibrated to within Specifications
• Fully Radiometric
• High Thermal Sensitivity - 0.1ºC @ 30ºC
• 160 x 120 Screen Resolution
• Large, bright, 3-1/2" screen shows image details
• Built in Laser and Digital Camera
• Accuracy within ±2% of reading or ±2ºC
• Hot and cold, plus 2 adjustable cursors.
• Automatically seek hot & cold spots
• User selectable Auto or Manual Level and Span
• Report Software
  

 
Eco Valve Back Pressure Valves and Pressure Relief Valves

Eco Valve Back Pressure Valves and Pressure Relief Valves are ideal for metering pump/chemical dosing applications. They are designed for long life and ease of installation and maintenance with an exceptional 3 year warranty. Available in PVC, CPVC, PVDF, polypropylene and 316L stainless steel. Designed to be used as a two port off line pressure relief valve to help protect the discharge side of positive displacement pumps from system failure due to over pressure caused by a blockage or accidental valve closure on the downstream side of the pump.

 
Adjustable Air Amplifier With Gauged Markings

Adjustable Air Amplifier from Nex Flow^TM with gauged markings are used for a variety of applications - available in anodized aluminum and marked to accurately set the gap from 0 to 1.5 mm. Easy to mount and maintain. Compressed air consumption and noise levels are reduced. Take energy from a small volume of compressed air to produce high velocity, high volume, low pressure output airflow. Quiet, efficient and can amplify flows up to 16 times the input air consumption rate.

 
SM Series Metering Ball Valves

SM Series Metering Ball Valves ½" to 2" in solid plastics are now available from Chemline Plastics. They are designed for fine linear flow control of chemicals or clean fluids through 180o rotation of the handle. The valves feature a solid ball with a special V-groove cut on the outside surface. Other features include union ends, full blocking design, double stem o-ring for safety and Teflon seats. The seats have elastomer cushions to provide low stem torques and automatic compensation for seat wear and expansion. The all-plastic construction (PVC or PP) offers high chemical resistance at low cost. Pressure rating for PVC valves is 230 psi; PP is rated at 150 psi. True Union socket end connections eliminate leakage problems common with threaded body valves. SM Series is available with an electric actuator with onboard positioner, making it an inexpensive electrically actuated proportional (linear) control valve.

 
Nex Flow^TM Side Mount and Muffling for Frigid-X^TM Panel Coolers

Priced only slightly above the price of regular anodized aluminum Nex Flow^TM X-Stream^TM Air Blade^TM Air Knives, these units can sometimes eliminate the need to go to more costly and heavy stainless steel units and save hundreds of dollars in cost! As with the regular anodized aluminum units, the new Hardened X-Stream^TM Air Blade^TM Air Knife comes complete with a stainless steel shim to set the air gap (most others use cheap plastic which can wear out quickly) and are held together with stainless steel screws.

 
Static Weighing With Ramsey Micro-Tech 3000 Series

The Ramsey Micro-Tech 3000 Series of electronic instruments signifies a new approach to scale instrumentation, giving you more flexibility and vastly increased upgrade capabilities. Each model is designed for your specific weighing application, and because all models utilize a common platform, you only need to become familiar with one basic interface.

 
Digi-Stem® Digital RTD Thermometer

The WAHL® DST600 is the new standard against which all other temperature indicating devices are compared.

• Trustworthy Alternative to Mercury-in-Glass
• Exclusive Patent Pending Wahl® Continuous Self Checking Technology to ensure accuracy and reliability
• Exclusive Adjustable Meter Update Rate
• User Selectable ºF or ºC
• Ambient operation at -40ºF to 158ºF
• Unique Probe ID feature prevents use of unauthorized probes
• Long Battery Life - 2 years nominal
• Adjustable Angle, Rigid, or Remote configurations available
• Programmable "RØ" for "matching" sensor to meter
• User friendly Single Point Software Calibration
• Tamper Resistant - all adjustments require software
• Exclusive Quick Disconnect Connection option on Remote Cables
• NIST Traceable Certificate included

 
Fuji Electric PHE 1- or 2-Channel Inkjet Strip-Chart Recorders

Fuji Electric offers the latest in low-cost inkjet recording with the PHE Series of inkjet strip chart recorders. These 100mm chart recorders are built with polymer plastic mold technology to make them lightweight and durable.

The Fuji PHE has many useful features. Available in one or two channel recording, the PHE chart recorder offers continuous analog trending on the same axis which eliminates the phase shift syndrome exhibited by conventional pen recorders. In addition, it has the ability to digitally print periodic data, scale line, alarm condition, burnout, and parameters.

 
Data Physics Corporation - Dynamic Signal Analyzers, Vibration Controllers, Electrodynamic Shakers

Data Physics is a leading manufacturer of signal processing solutions including dynamic signal analyzers, vibration controllers, shakers and accessories.

Since 1984, when Data Physics introduced the first vibration controller in a PC, Data Physics continues to introduce innovations in signal processing for the noise and vibration community. Building on the success of ABACUS and SignalCalc QUATTRO, the ultra-portable, cost effective signal analyzer, our SignalStar vibration controllers and SignalForce Shakers offer a new standard in performance and reliability.

 
Process Controls And Instrumentation Advertising Opportunities

Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

 
Process Controls And Instrumentation News Is Now On Facebook

Process Controls and Instrumentation is now on Facebook showing product links to the worlds leading manufacturers and suppliers of process control and instrumentation equipment. Be sure to click on the Like Button on the page.

  www.process-news.com