|
|
Gas Leak Detectors
Gas detector Peaker 3000 flex is a multi range gas detector, which is equipped with a selective gas sensor series GGS 3000 for methane (CH4), but is also suitable for the detection of propane gas (C3H8) und hydrogen (H2). The detection range is from a few ppm up to the “Lower Explosive Limit (LEL)”, which are stored for the different gases in the micro processor and can be called off. Leak detection for the different gases is carried out with a single sensor. Gas detector Peaker 3000 flex is not designed to be a measuring device. Peaker is a gas leak detector and should not be used a personal protection instrument!
|
|
|
Melt Pressure Measurement Products
ONEhalf20 is a recognized leader in pressure and temperature measurement solutions for the polymer, food, medical, and chemical extrusion processing industries. Melt pressure measurement is critical to improving processing efficiency, safety and finished goods product quality.
|
|
|
Portable Flow Meter for Difficult Liquids
Mount the ultrasonic sensor on the outside of a pipe to measure wastewater, sludge, slurries, cooling water, chemicals or abrasives. It works with liquids in metal and plastic pipes ½” diameter or larger.
The Greyline PDFM 5.0 Portable Doppler Flow Meter includes a 4-20mA output and 300,000 point data logger with USB output and Windows software. The rechargeable NiMH battery powers the unit for at least 24 hours continuous operation. New features include a large backlit display, reverse flow measurement and menu language selection.
|
|
|
Stenner Peristaltic Metering Pumps
Stenner peristaltic metering pumps are based on a simple, well-engineered design that minimizes complexity and delivers reliable performance. The time-tested designed is renowned for consistent quality and ease of service, which increases dependability for users while reducing service time and expense. Reliability comes from within and Stenner is a vertically integrated company; from raw goods to final assembly, producing ninety percent of our product in-house. By controlling the processes, we can control inventory and quality issues at the time of manufacture and maintain a three day lead time.
|
|
|
Disc Filtration Systems
Arkal Water Filtration Systems operate using a specially designed disc filtration technology. Thin, color-coded polypropylene discs are diagonally grooved on both sides to a specific micron size. A series of these discs are then stacked and compressed on a specially designed spine. When stacked, the groove on top runs opposite to the groove below, creating a filtration element with a statistically significant series of valleys and traps for solids. The stack is enclosed in a corrosion and pressure resistant housing.
|
|
|
Nex FlowTM SILENT X-STREAMTM FRIGIDX-XTM Panel Cooler Prevents Costly Shutdowns From Over Heating Electrical And Electronic Panels
Silent X-StreamTM Cabinet Enclosure Cooler/Cooling- Frigid-XTM series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.
There are Three (3) Types of Panel Coolers to choose from, Silent X-StreamTM Frigid-XTM Cabinet Panel Coolers NEMA Type 12, Type 3R & Type 4-4. Click on Learn More below for more information.
|
|
|
SAF-T-FLO Chemical Injection Quills And Sampling Probes
SAF-T-FLO specializes in manufacturing chemical injection quills and sampling probes for chemical feed systems in the municipal, industrial, and commercial water treatment industries. We customize each injection assembly to fit the needs of the individual application, while also stocking common components for quick delivery.
|
|
|
CS Corporation Stops
CS Corporation Stops have been designed to inject chemical into the center stream of the flow. Available in 7 materials of construction: brass, PVC, CPVC, PVDF, Stainless Steel, Alloy 20 and Hastelloy. Quill diameter sizes range from 1/4" (DN 8) to 2-1/2" (DN 65). They are available in the following sizes 1/2" (DN 15) to 3" (DN 75) with threated, socket or flanged connections.
|
|
|
Electrical Enclosure Air Conditioners From Thermal Edge
Engineered & manufactured to endure the most difficult of environments and applications. Thermal Edge air conditioners will exceed environmental requirements in applications like Steel, Food Processing, Petro-Chemical, Cement, Paper & Pulp and Plastics.
|
|
|
Air Amplifying Nozzles For Blow-Off and Blow Gun Applications
Nex FlowTM removes the confusion from air jets and nozzles. You do NOT need hundreds of different nozzles. Different nozzles have different outlet sizes and the more air used, the greater the force produced. Noise reduction up to 10 dBA is typical as well as reduced air consumption when compared to open jets and tubes.
The most important reason to use air nozzles or jets is safety All Nex Flow air nozzles and jets meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically lower with air nozzles and jets in addition to lower energy use.
|
|
|
Pneumatically Actuated Diaphragm Valve Type 730
The Chemline Type 730 Pneumatically Actuated Diaphragm Valve features a plastic diaphragm actuator, either normally closed, normally open or double acting. This valve offers long cycling life, high pressure resistance and a size range 1/2" to 4". Being a diaphragm valve, it is available for sanitary or slurry applications. With a Teflon® diaphragm, it has corrosion resistance superior to ball or butterfly valves. This becomes an economical control valve when a positioner is added.
|
|
|
The Nex FlowTM Heavy Duty X-StreamTM Ring VacTM Air Operated Conveyors have Extra Power
The X-tra powerful Heavy Duty X-StreamTM Ring VacTM from Nex FlowTM is designed for conveying materials over a longer distance both vertically and horizontally than the standard Ring VacTM systems. Made of hard anodized aluminum ir helps prevent premature wear that could occur with either an ordinary anodized aluminum or stainless steel Ring VacTM.
The Heavy Duty X-StreamTM Ring VacTM has no moving parts, utilizing compressed air for a powerful, efficient venture action along its length in a ompact design for high capacity conveying over large distances.
|
|
|
Ramsey Mercury-Free Tilt Sensor
Now available in a mercury-free version, this sensor provides you with the stability, sensitivity and performance you have come to expect from the traditional Thermo Scientific Ramsey Tilt Switches. Designed to meet government regulations, the mercury-free tilt sensor helps you improve your efficiency while protecting your profits.
Designed to help you address environmental concerns and meet government regulations regarding mercury usage, the Thermo Scientific Ramsey Mercury-Free Tilt Sensor uses advanced technology inside the tilt probe to replicate the same performance found in traditional mercury-based Ramsey tilt switches.
|
|
|
Alnor ABT Balometer Capture Hoods
By placing an Alnor® ABT Balometer® Capture Hood over a diffuser or grille, you can measure air volume in order to balance buildings and verify air flow distribution. The easily observed trend values and fast meter response make the ABT Balometer hood the preferred instrument for facility engineers.
|
|
|
Ashcroft Pressure Transducers And Pressure Transmitters
Ashcroft pressure transducers and pressure transmitters from Intertechnology Inc., provides a full line of pressure transducers and pressure transmitters with typical output signals from pressure transducers of 4-20 mA, 1-5 VDC, 1-6 VDC, 0-5 VDC, 0-10 VDC. Products range from low range differential pressure transducers to rugged high pressure explosion-proof transducers for use in extreme applications.
|
|
|
Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.
|
|
|
Process Controls And Instrumentation News Is Now On Facebook
Process Controls and Instrumentation is now on Facebook showing product links to the worlds leading manufacturers and suppliers of process control and instrumentation equipment. Be sure to click on the Like Button on the page.
|
