June 16, 2015  
www.process-news.com   

Process News Web Site  | Advertising Opportunities | Add Me | Remove Me | Products | Library | View Newsletter Online

ThermoVault140 Thermal Barrier System

The ThermoVault140 is an extreme high temperature data logging system, for use with a HiTemp140 data logger and stainless steel thermal barrier enclosure. This durable system can withstand temperatures up to 250 °C (482 °F) when completely submerged and 350 °C (662 °F) in dry heat applications (O-ring removed).

The ThermoVault140 is built for use in harsh applications that require extreme temperature monitoring, such as with furnace profiling, geothermal down-hole recording, and oven data logging.

The ThermoVault140 is available in multiple probe sizes. The 5.25 inch probe is ideal for ambient temperature monitoring, while the 24 inch flexible probe can be easily adjusted to measure hard-to-reach locations, or even the internal temperature of a product.

>> Learn More >> Another HCS Product
 


PDFM 5.1 Portable Doppler Flow Meter

It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 5.1 is fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 5.1 works on any liquid containing bubbles or solids and is recommended for "difficult liquids" like wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. Measures flow through most metal and plastic pipes including PVC, ductile iron, carbon steel and stainless steel.

The PDFM 5.1 Portable Doppler Flow Meter employs the latest technology in Doppler signal processing. Faster processing, higher data resolution and an improved ability to filter out noise, all combine to produce data accuracy far greater than previously possible.


  ULTRAPEN PT4 Free Chlorine Equivalent (FCE) & Temperature Pen

ULTRAPEN™ PT4 is Myron L Company's ground breaking, new Pocket Tester for measuring Free Chlorine Disinfecting Power, Free Chlorine Equivalent (FCE™), as well as Temperature. It is waterproof and designed to be extremely accurate, fast, and simple to use in diverse water quality applications.

  • Accuracy of up to ±0.3 ppm FCE
  • Proprietary Sensor Design
  • Calibration with pH and ORP Standard Solutions
  • Automatic Temperature Compensation
  • Temperature Readout
  • Waterproof


Air Amplifiers from Nex Flow™

Air amplifier or "air movers" from Nex Flow™ Air Products Corp., are a simple, inexpensive devices with virtually no maintenance that can convey fumes, smoke, lightweight materials and move a high volume of air for cooling, blowoff and drying applications. They use the "coanda effect" which entrains a large amount of surrounding air using only a small amount od compressed air. The effect is an amplification of up to 17 times the airflow or more (depending on the size) with reduced noise levels. Using only compressed air, the output flow and vacumm is easily controlled by adjusting or opening the air gap and/or inlet pressure. Either end of the air amplifier may be ducted to address all kinds of applications from bringing in fresh air into an area to removing nasty fumes. Be wary of unrealistic or unsubstantiated amplification ratios claimed by some companies.


 FLEX-PRO A3 ProSeries Peristaltic Pump

The Blue-White FLEX-PRO™ A3 peristaltic metering pump is engineered to provide exceptional features, capabilities and service.

The Blue-White FLEX-PRO™ A3 is equipped with a wealth of features. It feature Blue-White's Flow Verification System (with optional Micro-Flo sensor) and patented Tube Failure Detection system (TFD) which senses chemical in the pump head, shuts off the pump and activates an alarm relay.

The Blue-White FLEX-PRO™ A3 pump ships with 2 pump tubes and an injection/ check valve. A3 pumps include 10 FT of 3/8" OD PVC suction tubing, 10 FT of 3/8" OD PE discharge tubing and a suction strainer.


Eco Valve Back Pressure Valves and Pressure Relief Valves

Eco Valve Back Pressure Valves and Pressure Relief Valves are ideal for metering pump/chemical dosing applications. They are designed for long life and ease of installation and maintenance with an exceptional 3 year warranty.

Available in PVC, CPVC, PVDF, polypropylene and 316L stainless steel. Designed to be used as a two port off line pressure relief valve to help protect the discharge side of positive displacement pumps from system failure due to over pressure caused by a blockage or accidental valve closure on the downstream side of the pump.


Frigid-X™ Cabinet Panel Coolers

Frigid-X™ Cabinet Panel Coolers and Cabinet Enclosure Coolers for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.

Unlike many of our competitors all of the our Frigid-X Cabinet Panel Coolers and Cabinet Enclosure Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Frigid-X Cabinet Panel Coolers and Cabinet Enclosure Coolers are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.


Melt Pressure Gauge

The ONEhalf20 CTG6S Melt Pressure Gauge is the ideal choice for extrusion processors requiring a simple, reliable and accurate maintenance free melt pressure measurement. This rugged, totally self-contained Melt Pressure Gauge is available in either 0-5,000 psi or 0-10,000 psi ranges. This Melt Pressure Gauge allows the user to benefit from the improved efficiency and quality that goes along with melt pressure measurement at an affordable price.

The ONEhalf20 Melt Pressure Gauge Model CTG6S also offers the advantage of providing the industry standard 3.33 mv/Volt output utilizing the Bendix style 6 pin bayonet connector. This output enables the user to also connect this gauge to a remote panel mount digital melt pressure indicator.


Aqua-Boy Moisture Meter

The Aqua-Boy Moisture Meter measures the moisture content of many solid materials quickly and accurately. It provides a direct read-out of percent moisture in seconds. The extensive selection of probes available suits the Aqua-Boy Moisture Meter to very many materials.

Aqua-Boy Moisture Meter is designed for easy portability, fast operation with instantaneous indication and universal use. They are compact, handy units supplied with accessories, in a carrying case.

The measuring principle of the AQUA BOY is based on the electrical conductivity of the material which always bears a fixed relation to the moisture.


 Extruder Rupture Disks

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI.

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are offered with several mounting thread styles that are commonly found on plastics processing machinery.


Summit 2196 ANSI Pumps

The Summit 2196 ANSI Pumps are open impeller, centrifugal model with end suction/ top discharge. The Summit 2196 ANSI Pumps are designed for handling mild industrial corrosives. Completely interchangeable with Goulds 3196 pumps.

  • 2196 ANSI Pump
  • Capacities to 6000 gpm
  • Heads to 730 feet
  • Temperatures to 700ºF

Ring Blade™ Air Wipe Available In 316L Stainless Steel

The Nex Flow™ Ring Blade™ Compressed Air Operated Air Wipe, is used extensively for blowing off liquids and dirt from extruded surfaces. Priced among the lowest of any competitive units, the Nex Flow™ Ring Blade™ air wipe is now available in 316L c/w 316L stainless steel shims, screws, fitting and connection hose. Nex Flow™ Ring Blade™ air wipes are complete with materials you "pay extra" for from many over-priced competitors.

Available in ½", 1", 2", 3", and 4" diameters for 316L stainless steel. (and in ½", 1", 2", 3", 4" and 6" diameters in anodized aluminum).


Ramsey Mercury-Free Tilt Sensor

Now available in a mercury-free version, this sensor provides you with the stability, sensitivity and performance you have come to expect from the traditional Thermo Scientific Ramsey Tilt Switches. Designed to meet government regulations, the mercury-free tilt sensor helps you improve your efficiency while protecting your profits.

Designed to help you address environmental concerns and meet government regulations regarding mercury usage, the Thermo Scientific Ramsey Mercury-Free Tilt Sensor uses advanced technology inside the tilt probe to replicate the same performance found in traditional mercury-based Ramsey tilt switches.


Celesco Low Cost Stringpot

The SP3 from Celesco is a compact, economical stringpot that provides a user selectable 4-20 mA or 0-10 Vdc output signal. Simply install this sensor using the handy mounting bracket and connect the appropriate wires for the desired ouput.

The SP3 is constructed with a rugged, water resistant polycarbonate body that has been compactly designed for tight spaces and generous measuring cable misalignment. With 4 different ranges, the SP3 is a perfect solution for many applications from light industrial to OEM. Just like all of our other SP and SE models, the SP3 is in stock ready to ship.