June 30, 2015  

Process News Web Site  | Advertising Opportunities | Add Me | Remove Me | Products | Library | View Newsletter Online

Programmable 7 Day Timers

Programmable 7 Day Timers are compact digital time switches which provide precise timing with the flexibility of daily or weekly programming. Simple and fast setting by means of push buttons and display prompts.

Programmable 7 Day Timers popular applications include: Heaters, filters, pumps, fans, signs, blowers, indoor and outdoor lighting, feeders, security/alarm systems, and process controls. Skip function used for skipping all the switching programs of the next calendar day. Reset function for clearing the whole switching program.

>> Learn More >> Another HCS Product

DFS 5.1 Doppler Flow Switch

Control Flow from outside a pipe. Recommended for "difficult liquids" including wastewater, cooling water, slurries, sludge, chemicals, viscous liquids and abrasives. The Greyline DFS 5.1 is ideal for pump protection or to activate flow/no-flow alarms.

The DFS 5.1 control relay can be set to turn ON and OFF at any flow rate between 0.25 and 10 ft/sec (0.075 to 3 m/sec). Insert two links for separate ON/OFF set points or just one link for a Hi or Lo flow alarm. Set the relay actuation time delay from 0 to 80 seconds.

  NexSys® Control System

The NexSys® control system is the latest in a long line of reliable, easy to use controllers from Lakewood Instruments. The NexSys® control system uses the latest in microprocessor technology with a 5.7” Color Touch Screen interface for a high level of application flexibility.

Key Features:

  • Interface: Touch Screen display, 5.7" diagonal viewing area.
  • Display Size: 115×86 mm
  • Pixel: 320×240
  • Color: TFT 65536
  • Backlight: LED or CCFL
  • Memory: 16 MB Flash, 16 MB RAM.

Frigid-X™ Cabinet Panel Coolers

Frigid-X™ Cabinet Panel Coolers and Cabinet Enclosure Coolers for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.

Unlike many of our competitors all of the our Frigid-X Cabinet Panel Coolers and Cabinet Enclosure Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Frigid-X Cabinet Panel Coolers and Cabinet Enclosure Coolers are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.

 Fluid-O-Tech: Mag Drive Pumps

For the last 60 years our people have been building a strong reputation in the fluid handling industry based on the ability to anticipate the market needs turning them into innovative solutions.

Integrity, commitment and growing investments have led to what Fluid-o-Tech is today: a highly specialized organization partnering for innovation with customers, research and engineering centers to provide edge of technology solutions and opportunities to the business community.

Commitment to excellence has pushed Fluid-o-Tech to pursue sound business practices in order to keep its leadership in the global market.

CS Corporation Stops

CS Corporation Stops have been designed to inject chemical into the center stream of the flow. Available in 7 materials of construction: brass, PVC, CPVC, PVDF, Stainless Steel, Alloy 20 and Hastelloy.

Quill diameter sizes range from 1/4" (DN 8) to 2-1/2" (DN 65). They are available in the following sizes 1/2" (DN 15) to 3" (DN 75) with threated, socket or flanged connections.

Carbicote® Strippable Coatings

Carbicote® - water-based Strippable Coatings that can be easily removed from many surfaces. Carbicote® is commonly used as safe peel-off protection for spray booth walls, lights, and windows.

  • EASY to use.  Apply Carbicote® by spray, brush, or roller.  It dries quickly, forming a removable barrier in minutes.  Cleanup with soap and water, no solvent required!
  • EASY to strip.  Carbicote® has excellent cohesion.  When pulled, it stretches and peels off in large sheets.  It retains its flexibilty, does not become brittle with age.  Carbicote also has excellent adhesion.  It adheres well to most surfaces including stainless steel.
  • EASY to store.  Carbicote® is nonflammable; store it in the painting area ready for use.  No "flash fire" danger from open containers; no special paint locker needed.
  • EASY to handle.  Carbicote® meets EPA and OSHA requirements for low solvent emission and safety in the workplace.  Safe as latex paint to handle, no smelly solvent odor.

NaK Filled Melt Pressure Transducer

The CTNAK6S NaK Filled Melt Pressure/Temperature Transducer with integral thermocouple is designed specifically for food, packaging and medical processing applications. The CTNAK6S uses a special high temperature fill (NaK, potassium sodium) and an Inconel diaphragm to allow for pressure measurements in applications with process temperatures up to 1,000ºF. The unit features the industry standard 3.33 mV/Volt output and offers pin-to-pin compatibility with all competitors models utilizing the Bendix style 6 pin bayonet connector.

The CTNAK6S NaK Filled Melt Pressure/Temperature Transducer with integral thermocouple comes standard with a 6" rigid stem, 18" of flexible capillary, integral Type J thermocouple and a 1/2-20 UNF thread for mounting in standard transducer mounting holes.

Stainless Steel Pressure Transmitters

Low cost stainless steel pressure transmitters Model PX61 features compact construction, an integral amplifier, 2-wire 4-20mA output signal and extensive medium compatablility.

The design provides a 1/2% accurate, low cost pressure transmitter that can operate over a wide temperature range with corrosion resistance.

Models are available from stock in both standard and refrigerant models.

Stainless Steel Pressure Transmitters Model PX61 determines the pressures in liquids and gases and convert these pressures to an electrical signal. The ceramic diaphragm sensing element deflects under pressure. The mechanical deformation is converted to an electrical signal by means of a DMS-bridge. An electronic system converts the DMS-signals to a standard 4-20 mA signal.

 Extruder Rupture Disks

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI.

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are offered with several mounting thread styles that are commonly found on plastics processing machinery.

Dywer Series DCG Digital Pressure Calibration Gauge

The Series DCG Digital Pressure Calibration Gauge features a remarkable 0.05% full scale accuracy that includes the effects of linearity, hysteresis, repeatability, and temperature across the entire compensated temperature range. This gauge was specifically designed to be a portable test gage where its unmatched accuracy is required. This is a highly durable gage that is housed in a rugged and compact 3 inch stainless steel case.

This highly accurate test gage offers menu configurable and password protected features that include engineering unit conversion, seven selectable languages, field calibration capabilities, as well as an adjustable bar graph and update/dampening rates.

Descale 518 Water Scale Remover

Now there is a safe and effective way to remove scale deposits from all types of stainless steel, aluminium, and galvanized water cooled and water heated equipment. From industrial plants to land mark buildings to marine. Descale 518 is a new technlogy descaler specifically formulated to rapidly clean mineral from passages in water cooled or heated equipment. It improves plant efficiency and extends the usable life of cleaned equipment.

Dynamic 518 is safe for your maintenance crews when used as directed. The concentrated solution may be held safely in the open hand, without harmful effects. The solution has a pleasant odor and does not have any obnoxious or unpleasant vapors when dissolving water scale, lime and rust deposits.

Effective because its fortified with Powerful Low Foaming Wetting and Penentrating Agents, and safe degreasing solvents. And it reduces the risk of significant metal loss!

Pump Controllers

Ktech Industrial Products Inc., Pump Controllers are installed to automatically operate a pump to control the level of a liquid in a tank. Pump Controllers are used in conjunction with Ktech Multi-Level Float Switches.

Use two contacts to start and stop the pump. A relay circuit switches power to the fractional horsepower pump motor or to the three-phase contactor of a large pump motor. Similarly, the switch contacts can be used to operate solenoid valves.

OEM Application Cable Extension Position Transducer

The Celesco PTX101 is a low cost, compact and easy-to-use cable extension transducer. It is available with full-scale measurement ranges from 2 to 100 inches. The Celesco PTX101 provides a voltage feedback signal that is proportional to the linear movement of a traveling stainless-steel extension cable. Simply mount the body of the transducer to a fixed surface and attach the extension cable to the moving object. The Celesco PTX101 is recommended for applications where space and money is limited.