August 11, 2015   

Process News Web Site  | Advertising Opportunities | Add Me | Remove Me | Products | Library | View Newsletter Online

1/8 DIN Fuzzy Logic Digital Indicator Controller

The FuzyPro 1/8 DIN Fuzzy Logic Digital Indicator Controller Model 8010 available with red or green displays. One latchable relay is fitted as standard, plug-in modules allow two more alarm relays, PV retransmission or transmitter PSU.

  • Four-digit LED display
  • Up to 3 alarms
  • transmitter PSU option
  • Min/max value hold
  • Engineering units

>> Learn More >> Another HCS Product

TTFM 1.0 Transit Time Ultrasonic Flowmeter

Accurately measure the flow rate of clean, non-aerated liquids like water, chemicals, and oils in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display along with totalizer and signal strength. Use the built-in control relays for flow alarms or flow proportionate pulse. Connect the isolated 4-20mA output to PLC's or controllers.

The TTFM 1.0 works on a wide range of pipe sizes and materials including carbon steel, stainless steel, ductile iron, cast iron, PVC, PVDF, fiberglass, copper, brass, aluminum and pipes with bonded liners including epoxy, rubber and Teflon.

  Walchem W600 Water Treatment Controller

Take Control Now and Connect with the Best!

The W600 series provides reliable, flexible and powerful control for your water treatment program.

  • Large touchscreen display with icon based programming makes setup easy
  • Universal sensor input provides extraordinary flexibility; the same controller can be used with almost any type of sensor needed
  • Optional dual analog (4-20 mA) input for Fluorometers or nearly any other process value
  • Multiple language support allows simple setup no matter where your business takes you
  • Six control outputs allow the controller to be used in more applications
  • Economical wall-mount package for easy installation

Air Knife Systems: Air Knife - Stainless Steel Air Knife, Air Knife Blow Off System

Air Knife, Stainless Steel Air Knife, Air-Blade™ Air Knife Blow Off System from Nex Flow™ is easy to mount and maintain and reduces both compressed air consumption and noise levels.

Air Knife, Stainless Steel Air Knife, Air-Blade™ Air Knife Blow Off System from Nex Flow™ produces a “laminar” flow of air along its length using the ”Coanda” effect which “entrains” a large volume of air from the surrounding area along with the small amount of compressed air from the Air-Blade™ to produce an output flow up to 30 times.

System payback on compressed air savings can be as soon as a few weeks in some applications.

 Self Priming Magnetic Drive Sealless Centrifugal Pumps from Sethco

The Sethco magnetic drive, self priming pumps feature Kynar® (PVDF) construction for use in corrosive liquid applications.

Priming the pump is easy. The operator simply fills the priming chamber with the liquid to be pumped and turns the pump on. Other features include the ability to run dry after initial priming, easy to disassemble design and an internal basket strainer to prevent foreign objects from entering pump.

Corrosion resistant, the pump is recommended for acids, alkalies, caustics, sea water, solvents and many other difficult applications.

Eco Valve Back Pressure Valves and Pressure Relief Valves

Eco Valve Back Pressure Valves and Pressure Relief Valves are ideal for metering pump/chemical dosing applications. They are designed for long life and ease of installation and maintenance with an exceptional 3 year warranty.

Available in PVC, CPVC, PVDF, polypropylene and 316L stainless steel. Designed to be used as a two port off line pressure relief valve to help protect the discharge side of positive displacement pumps from system failure due to over pressure caused by a blockage or accidental valve closure on the downstream side of the pump.

Air Jets From Nex Flow™

Air Jets are larger than nozzles and used when a wider area needs to be hit with the amplified air. They are significantly more efficient than nozzles although often use as much compressed air. Their best use is to replace pairs of nozzles that are used for part ejection or for blow-off applications that require greater force than that provided by air knives or air movers. Nozzles are for point use while air jets can fan out somewhat for better continuous blow-off when a row of them are made. Nex Flow air jets are all made adjustable with a lock ring to assure the security of any gap setting. They have a female 1/8” NPT and made lightweight with anodized aluminum.

NaK Filled Melt Pressure Transducer

The CTNAK6S NaK Filled Melt Pressure/Temperature Transducer with integral thermocouple is designed specifically for food, packaging and medical processing applications. The CTNAK6S uses a special high temperature fill (NaK, potassium sodium) and an Inconel diaphragm to allow for pressure measurements in applications with process temperatures up to 1,000ºF. The unit features the industry standard 3.33 mV/Volt output and offers pin-to-pin compatibility with all competitors models utilizing the Bendix style 6 pin bayonet connector.

The CTNAK6S NaK Filled Melt Pressure/Temperature Transducer with integral thermocouple comes standard with a 6" rigid stem, 18" of flexible capillary, integral Type J thermocouple and a 1/2-20 UNF thread for mounting in standard transducer mounting holes.

Industrial RTD Temperature Sensors

This is the all purpose model of our Industrial RTD Temperature Sensors line for general light duty industrial or commercial temperature measurement.

Industrial RTD Temperature Sensors features a small threaded cast aluminum head with O-ring seal. Electrical connections are made through the cable gland with rubber grommet.

The standard process connector is 1/4", although 1/2" NPT is available if specified at order time. The sheath is 1/4" O.D. stainless steel. The sheath length must be specified at order time, although 4" and 6" lengths are normally available from stock.

 Extruder Rupture Disks

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI.

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are offered with several mounting thread styles that are commonly found on plastics processing machinery.

Ramsey RT Series Rotary Level Control

The Ramsey RT Series Rotary Level Control is designed for point level monitoring of solids in bins, vessels and chutes. This control can eliminate spills, material waste and down time by preventing bin overflows, plugged chutes and empty bins. It works equally well with plastics, food, chemicals, raw ores, aggregates or other solid materials.

Thermo Fisher Scientific's RT Series Rotary Level Control is designed for Point Level Monitoring of solids in bins, vessels and chutes.  The RT Series Rotary Level Control can eliminate spills, material waste and down time by preventing bin overflows, detecting plugged chutes and empty bins.  The RT Series Rotary Level Control for Point Level Monitoring works equally well in plastics, food, chemicals, raw ores, aggregate or other solid materials.

Vortex Tubes - Available In 3 Size Ranges

Vortex tubes are devices that work on a standard compressed air supply. Air enters the vortex tube and literally splits the air flow into two parts - cold air at one end, and hot air at the other - all without any moving parts.

Vortex tubes have an adjustable valve at the "hot" end controls the volume of the air flow, and the temperature exiting at the cold end. By adjusting the valve, you control the "cold fraction" which is the percentage of total input compressed air the exits the cold end of the vortex tube. Frigid-X™ vortex tubes may also be supplied with a fixed preset "cold function" instead of an adjustable valve.

Inside is the interchangeable brass "generator" which can alter the air used in the vortex tube, and control the temperature ranges you wish to have at the cold and hot ends. There are several ranges of generators for compressed air capacity. There are also two basic types of generators - one to produce the extreme cold temperatures (maximum cold temperature out called the C generator) and one type to produce the maximum amount of cooling (maximum refrigeration called the H generator).

Monarch UltraPro AG500 Ultrasonic Leak Detector

The UltraPro AG500 is a powerful ultrasonic leak detector and electronic stethoscope for use in industry, maintenance and manufacturing wherever precision leak detection or diagnostics are required.

Ultrasound is composed of high-frequency sound waves above the range of human hearing. UltraPro uses this technology to sense frequencies ranging from 18 to 42 kilohertz, which are electronically translated down into the audible range. Predictive Maintenance uses airborne/structure-borne ultrasound technology to locate leaks in any gaseous systems and to troubleshoot rolling-element bearings or valve operations. UltraPro features a unique Automatic Gain Control which automatically filters the signal to provide the best signal-to-noise ratio, suppressing background noise and pinpointing leaks. The AG circuit simplifies operation, removing complicated adjustment knobs and filter switches. UltraPro offers superior electronics with rugged industrial packaging in a simple-to-use ultrasonic meter

Celesco MTA Miniature Cable Extension Position Transducer

The MTA is part of Celesco’s miniature line of cable-extension position transducers that is perfect for short-ranged testing and control applications where space is at a premium. This transducer uses a high-cyle conductive plastic potentiometer to provide a precision voltage divider feedback signal for measurement ranges of 3 or 5 inches full stroke.

With an accuracy of ±0.4% and a repeatability of ±0.02%, the MTA conveniently mounts using servo-clips for easy rotational adjustment.