August 25, 2015   

Process News Web Site  | Advertising Opportunities | Add Me | Remove Me | Products | Library | View Newsletter Online

ThermoVault140 Thermal Barrier System

The ThermoVault140 is an extreme high temperature data logging system, for use with a HiTemp140 data logger and stainless steel thermal barrier enclosure. This durable system can withstand temperatures up to 250 °C (482 °F) when completely submerged and 350 °C (662 °F) in dry heat applications (O-ring removed).

The ThermoVault140 is built for use in harsh applications that require extreme temperature monitoring, such as with furnace profiling, geothermal down-hole recording, and oven data logging.

The ThermoVault140 is available in multiple probe sizes. The 5.25 inch probe is ideal for ambient temperature monitoring, while the 24 inch flexible probe can be easily adjusted to measure hard-to-reach locations, or even the internal temperature of a product.

>> Learn More >> Another HCS Product

PDFM 5.1 Portable Doppler Flow Meter

It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 5.1 is fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 5.1 works on any liquid containing bubbles or solids and is recommended for "difficult liquids" like wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. Measures flow through most metal and plastic pipes including PVC, ductile iron, carbon steel and stainless steel.

The PDFM 5.1 Portable Doppler Flow Meter employs the latest technology in Doppler signal processing. Faster processing, higher data resolution and an improved ability to filter out noise, all combine to produce data accuracy far greater than previously possible.

  Dosing Pumps from Lutz-JESCO America Corp

Lutz-Jesco has therefore developed special solutions for each area of application. Our extensive range of products start from cost-effective, magnetically-operated diaphragm dosing pumps, through the "muscular" motor-driven diaphragm dosing pumps, up to the piston dosing pumps for high pressure requirements. These are used for dosing fluids with highly varied viscosities, most of which are chemically aggressive and toxic, and some of which are actually abrasive or emit gases.

Diaphragm dosing pumps are leak-free, and are therefore suitable for highly aggressive or toxic media. Depending on the gear type, the diaphragm allows pressures up to 16 bar. Stepper motor-driven diaphragm pumps are particularly suitable for highly accurate, reproducible industrial dosing thanks to their design. Many fluid media can be safely fed into the respective processes using these pumps.

Frigid-X™ Cabinet Panel Coolers

Frigid-X™ Cabinet Panel Coolers and Cabinet Enclosure Coolers for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.

Unlike many of our competitors all of the our Frigid-X Cabinet Panel Coolers and Cabinet Enclosure Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Frigid-X Cabinet Panel Coolers and Cabinet Enclosure Coolers are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.

 Carlon Water Meters

When long meter life, low maintenance and highest accuracy are needed in a totalizing water meter, Carlon's Residential & Commercial line of positive displacement meters are what you need. The Residential & Commercial line has a well deserved reputation for excellence in the world of municipal and residential water meters. The Residential & Commercial meter is available in sizes from 1/2" to 2" and operates at flow rates from 1/4 to 160 GPM and pressures of 150 psi. These ratings are well beyond what you will encounter for your municipal and residential metering needs. All of Carlon's bronze housing Residential & Commerical meters meet or exceed AWWA specifications.

CS Corporation Stops

CS Corporation Stops have been designed to inject chemical into the center stream of the flow. Available in 7 materials of construction: brass, PVC, CPVC, PVDF, Stainless Steel, Alloy 20 and Hastelloy.

Quill diameter sizes range from 1/4" (DN 8) to 2-1/2" (DN 65). They are available in the following sizes 1/2" (DN 15) to 3" (DN 75) with threated, socket or flanged connections.

Carbicote® Strippable Coatings

Carbicote® - water-based Strippable Coatings that can be easily removed from many surfaces. Carbicote® is commonly used as safe peel-off protection for spray booth walls, lights, and windows.

  • EASY to use.  Apply Carbicote® by spray, brush, or roller.  It dries quickly, forming a removable barrier in minutes.  Cleanup with soap and water, no solvent required!
  • EASY to strip.  Carbicote® has excellent cohesion.  When pulled, it stretches and peels off in large sheets.  It retains its flexibilty, does not become brittle with age.  Carbicote also has excellent adhesion.  It adheres well to most surfaces including stainless steel.
  • EASY to store.  Carbicote® is nonflammable; store it in the painting area ready for use.  No "flash fire" danger from open containers; no special paint locker needed.
  • EASY to handle.  Carbicote® meets EPA and OSHA requirements for low solvent emission and safety in the workplace.  Safe as latex paint to handle, no smelly solvent odor.

Melt Pressure Gauge

The ONEhalf20 CTG6S Melt Pressure Gauge is the ideal choice for extrusion processors requiring a simple, reliable and accurate maintenance free melt pressure measurement. This rugged, totally self-contained Melt Pressure Gauge is available in either 0-5,000 psi or 0-10,000 psi ranges. This Melt Pressure Gauge allows the user to benefit from the improved efficiency and quality that goes along with melt pressure measurement at an affordable price.

The ONEhalf20 Melt Pressure Gauge Model CTG6S also offers the advantage of providing the industry standard 3.33 mv/Volt output utilizing the Bendix style 6 pin bayonet connector. This output enables the user to also connect this gauge to a remote panel mount digital melt pressure indicator.

Stainless Steel Pressure Transmitters

Low cost stainless steel pressure transmitters Model PX61 features compact construction, an integral amplifier, 2-wire 4-20mA output signal and extensive medium compatablility.

The design provides a 1/2% accurate, low cost pressure transmitter that can operate over a wide temperature range with corrosion resistance.

Models are available from stock in both standard and refrigerant models.

Stainless Steel Pressure Transmitters Model PX61 determines the pressures in liquids and gases and convert these pressures to an electrical signal. The ceramic diaphragm sensing element deflects under pressure. The mechanical deformation is converted to an electrical signal by means of a DMS-bridge. An electronic system converts the DMS-signals to a standard 4-20 mA signal.

ITMA or V Industrial Pressure Transmitters

The ITMA or V Industrial Pressure Transmitters are designed for the tough environments of hydraulic applications with the possible prescence of corrosive materials.

The ITMA or V Industrial Pressure Transmitters feature the reliable Bendix style 6 pin connector and either 4-20mA or 0 - 10 Vdc output. The units offer 1/8 X 27 NPT female process connection as standard.

  • 4-20mA or 0 - 10 Vdc outputs with zero and span adjustments
  • Accuracy +/- 0.5%
  • Internal 80% shunt calibration
  • All welded all stainless steel construction

Midget Model 277 Levelometer

The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks. Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges.

These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale.

Descale 518 Water Scale Remover

Now there is a safe and effective way to remove scale deposits from all types of stainless steel, aluminium, and galvanized water cooled and water heated equipment. From industrial plants to land mark buildings to marine. Descale 518 is a new technlogy descaler specifically formulated to rapidly clean mineral from passages in water cooled or heated equipment. It improves plant efficiency and extends the usable life of cleaned equipment.

Dynamic 518 is safe for your maintenance crews when used as directed. The concentrated solution may be held safely in the open hand, without harmful effects. The solution has a pleasant odor and does not have any obnoxious or unpleasant vapors when dissolving water scale, lime and rust deposits.

Effective because its fortified with Powerful Low Foaming Wetting and Penentrating Agents, and safe degreasing solvents. And it reduces the risk of significant metal loss!

Summit 2196 ANSI Pumps

The Summit 2196 ANSI Pumps are open impeller, centrifugal model with end suction/ top discharge. The Summit 2196 ANSI Pumps are designed for handling mild industrial corrosives. Completely interchangeable with Goulds 3196 pumps.

  • 2196 ANSI Pump
  • Capacities to 6000 gpm
  • Heads to 730 feet
  • Temperatures to 700ºF

OEM Application Cable Extension Position Transducer

The Celesco PTX101 is a low cost, compact and easy-to-use cable extension transducer. It is available with full-scale measurement ranges from 2 to 100 inches. The Celesco PTX101 provides a voltage feedback signal that is proportional to the linear movement of a traveling stainless-steel extension cable. Simply mount the body of the transducer to a fixed surface and attach the extension cable to the moving object. The Celesco PTX101 is recommended for applications where space and money is limited.