March 8, 2016  
www.process-news.com   

Process News Web Site  | Advertising Opportunities | Add Me | Remove Me | Products | Library | View Newsletter Online

Custom Control Panels

Custom Control Panels, Temperature Control Panels for a wide variety of applications are manufactured by Heaters Controls And Sensors. We provide Custom Control Panels, Temperature Control Panels that are needed to operate in 60ºC environments, to laboratory controllers that are to maintain temperatures within +/- 0.01ºC.

These Custom Control Panels, Temperature Control Panels could be made to withstand washdowns with corrosive chemicals with all components on the panel conforming to IP 65 and NEMA 4X. Integration of components for steam booster heaters or recirculation heaters with flow fail safe interlocks are also available.

<< Learn More >> << Another HCS Product >>
 


TTFM 1.0 Transit Time Ultrasonic Flowmeter

Accurately measure the flow rate of clean, non-aerated liquids like water, chemicals, and oils in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display along with totalizer and signal strength. Use the built-in control relays for flow alarms or flow proportionate pulse. Connect the isolated 4-20mA output to PLC's or controllers.

The TTFM 1.0 works on a wide range of pipe sizes and materials including carbon steel, stainless steel, ductile iron, cast iron, PVC, PVDF, fiberglass, copper, brass, aluminum and pipes with bonded liners including epoxy, rubber and Teflon.


  Walchem W600 Water Treatment Controller

Take Control Now and Connect with the Best!

The W600 series provides reliable, flexible and powerful control for your water treatment program.

  • Large touchscreen display with icon based programming makes setup easy
  • Universal sensor input provides extraordinary flexibility; the same controller can be used with almost any type of sensor needed
  • Optional dual analog (4-20 mA) input for Fluorometers or nearly any other process value
  • Multiple language support allows simple setup no matter where your business takes you
  • Six control outputs allow the controller to be used in more applications
  • Economical wall-mount package for easy installation


Air Jets

Air Jets are larger than nozzles and used when a wider area needs to be hit with the amplified air. They are significantly more efficient than nozzles although often use as much compressed air. Their best use is to replace pairs of nozzles that are used for part ejection or for blow-off applications that require greater force than that provided by air knives or air movers.

Nozzles are for point use while air jets can fan out somewhat for better continuous blow-off when a row of them are made. Nex Flow air jets are all made adjustable with a lock ring to assure the security of any gap setting.

They have a female 1/8” NPT and made lightweight with anodized aluminum.


 Self Priming Magnetic Drive Sealless Centrifugal Pumps from Sethco

The Sethco magnetic drive, self priming pumps feature Kynar® (PVDF) construction for use in corrosive liquid applications.

Priming the pump is easy. The operator simply fills the priming chamber with the liquid to be pumped and turns the pump on. Other features include the ability to run dry after initial priming, easy to disassemble design and an internal basket strainer to prevent foreign objects from entering pump.

Corrosion resistant, the pump is recommended for acids, alkalies, caustics, sea water, solvents and many other difficult applications.


ACCU-VENT Automatic Degassing Valves

ACCU-VENT Automatic Degassing Valves are designed to automatically vent gases and vapors that are commonly released from chemicals such as Sodium Hypochlorite or Hydrogen Peroxide or Sulfuric Acid.

  • CPVC (Corzan) and Viton corrosion resistant wetted materials of construction
  • specially designed float material automatically vents built up gases on system start up and under working pressure
  • can be used on feed side or discharge side of pump (or both)
  • standard 1/2" NPT threaded connections or optional 3/4" NPT available in other materials of construction for various gaseous liquid chemicals


Ultrasonic Leak Detector

The Nex Flow™ Ultrasonic Leak Detector is the ideal maintenance yool to reduce rompressed air costs due to leaks. Typically only 50% of a compressor’s air is used for production and the rest is “lost” though waste and air leaks. According to the U.S. Department of Energy “Ultrasonic technology is the best method for finding leaks and verifying repairs.”

The better the system, the more leaks you find and the more money you save! Always beware of cheap ultrasonic leak detector that just may not do the job.


Extruder Rupture Disks

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI.

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are offered with several mounting thread styles that are commonly found on plastics processing machinery.


Aqua-Boy Moisture Meter

The Aqua-Boy Moisture Meter measures the moisture content of many solid materials quickly and accurately. It provides a direct read-out of percent moisture in seconds. The extensive selection of probes available suits the Aqua-Boy Moisture Meter to very many materials.

Aqua-Boy Moisture Meter is designed for easy portability, fast operation with instantaneous indication and universal use. They are compact, handy units supplied with accessories, in a carrying case.

The measuring principle of the AQUA BOY is based on the electrical conductivity of the material which always bears a fixed relation to the moisture.


6" & 12" Extruder Rupture Disks With M18 x 1.5 Mounting Thread

The RD6H-M18 Extruder Rupture Disks are designed for emergency relief of excess pressure in plastics processing machinery. It is designed to instantaneously rupture at a predetermined pressure.

The RD6H-M18 Extruder Rupture Disk have a 6" stem, Hex Head and a M18 x 1.5 mounting thread. The RD6H-M18 is available in a wide variety of burst pressures and is typically a stock item.

The RD12H-M18 Extruder Rupture Disk is designed for emergency relief of excess pressure in plastics processing machinery. It is designed to instantaneously rupture at a predetermined pressure.

The RD12H-M18 Extruder Rupture Disk has a 12" stem, Hex Head and a M18 x 1.5 mounting thread. The RD6H-M18 is available in a wide variety of burst pressures and is typically a stock item.


Dust Collection and Fume Extraction System

The Model 40002FMS STREAM VAC™ is a versatile and affordable compact air cleaning system is ideal for the removal of fumes, dust and other air pollution from work stations without the need for heavy and bulky machinery.

The Nex Flow™ Stream Vac™ is an in line air conveyor that when hooked up to a 2” hose up to 25 feet (8 meters) and connected to a compressed air line, it will remove up to several hundred cubic feet of air while using only a minimal amount of compressed air, taking with it welding fumes, soldering fumes, particulate from local grinding operations, smoke and particulate from almost any “spot” application.


Midget Model 277 Pneumatic Indicator

The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks.

Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges.

These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale.


Safety Relays from Schleicher Electronic

Innovation and quality bring success.

The EU Machinery Directive stipulates that machinery must not pose any danger. This requires safety concepts that ensure maximum protection for humans and machines on a variety of levels. Safety relays must therefore be easy to use and give a reliable response.

Schleicher safety relays meet the safety standards of DIN ISO 13849 and DIN EN 61062, and fulfil the technical requirements for relay technology with positively-driven contacts in accordance with EN 50205.

Evaluation units for emergency stop buttons and safety gates

  • Emergency stop, safety gates, safety mats and light grid applications
  • Devices are also suitable for use in processing signals from the output switching elements (OSSD) of a light grid in accordance with DIN EN 61496-1
  • Devices are also suitable for evaluation of safety mats in accordance with DIN EN 1760-1

OEM Application Cable Extension Position Transducer

The Celesco PTX101 is a low cost, compact and easy-to-use cable extension transducer. It is available with full-scale measurement ranges from 2 to 100 inches. The Celesco PTX101 provides a voltage feedback signal that is proportional to the linear movement of a traveling stainless-steel extension cable. Simply mount the body of the transducer to a fixed surface and attach the extension cable to the moving object. The Celesco PTX101 is recommended for applications where space and money is limited.


Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>