April 5 , 2016  
www.process-news.com   

Process News Web Site  | Advertising Opportunities | Add Me | Remove Me | Products | Library | View Newsletter Online

PTF06 Series Pressure Transmitters

PTF06 Series Pressure Transmitters are very accurate and reliable instruments, which convert pressure inputs to current or voltage signals. These transmitters are equipped with a damping element to direct away pressure peaks or liquid hammering from their sensors; hence showing a high level of resistance to mechanical shocks. The typical response time of the PTF06 transmitter is 1 ms, and will never exceed 5 ms, even when the damping element is functioning and the fluid viscosity is at its peak.

The industrial PTF106 Pressure Transmitter meets the electromagnetic compatibility (EMC) requirements of IEC61000-6-2 and IEC61000-6-3.

<< Learn More >> << Another HCS Product >>


DFS 5.1 Doppler Flow Switch

Control Flow from outside a pipe. Recommended for "difficult liquids" including wastewater, cooling water, slurries, sludge, chemicals, viscous liquids and abrasives. The Greyline DFS 5.1 is ideal for pump protection or to activate flow/no-flow alarms.

The DFS 5.1 control relay can be set to turn ON and OFF at any flow rate between 0.25 and 10 ft/sec (0.075 to 3 m/sec). Insert two links for separate ON/OFF set points or just one link for a Hi or Lo flow alarm. Set the relay actuation time delay from 0 to 80 seconds.


CHEM-PRO C2 ProSeries Diaphragm Pump

  • Max feed rate: 15 GPH / 55 LPH
  • Max pressure: 175 PSI / 12 bar
  • 166 RPM (Max strokes per minute)
  • Variable speed, Smooth motor driven chemical feed
  • Nema 4X washdown / IP 66
  • Back Lit LCD display
  • Priming / Degassing Valve – Built-in
  • Leak Detection – Built-in Diaphragm Failure Detection (DFD)
  • Exclusive Diaflex® Single Layer PVDF diaphragm.

ArGo Stack Turner - Paper Stack Turner

The ArGo Stack Turner - Paper Stack Turner is the ideal solution for turning loads and handling goods. A versatile machine that combines the dynamism of fork lift trucks with the versatility of the most modern stack turners. Low-cost and easy to use, it is the fitting answer to the needs of small and medium enterprises.

ArGo Stack Turner turns stacks of paper in less than a minute without compressing them and takes them directly to under the printing machine.

ArGo easily exchanges the various pallets, also separating the stacks and distributing them over several pallets.

ArgGo moreover works with variable stacks of any size and material: punched paper, PVC sheets and booklets.


Carlon Water Meters

When long meter life, low maintenance and highest accuracy are needed in a totalizing water meter, Carlon's Residential & Commercial line of positive displacement meters are what you need. The Residential & Commercial line has a well deserved reputation for excellence in the world of municipal and residential water meters.

The Residential & Commercial meter is available in sizes from 1/2" to 2" and operates at flow rates from 1/4 to 160 GPM and pressures of 150 psi. These ratings are well beyond what you will encounter for your municipal and residential metering needs. All of Carlon's bronze housing Residential & Commerical meters meet or exceed AWWA specifications.


CS Corporation Stops

CS Corporation Stops have been designed to inject chemical into the center stream of the flow. Available in 7 materials of construction: brass, PVC, CPVC, PVDF, Stainless Steel, Alloy 20 and Hastelloy.

Quill diameter sizes range from 1/4" (DN 8) to 2-1/2" (DN 65). They are available in the following sizes 1/2" (DN 15) to 3" (DN 75) with threated, socket or flanged connections.


Picklex® 20 - Metal Surface Cleaner - Surface Rust Remover

Picklex® 20 acts as a metal surface cleaner, surface rust remover, 100% rust converter, very long term rust inhibitor, pre-treatment/conversion coating and a sealer, for any ferrous & non-ferrous metal surface, such as carbon steel, stainless steel, aluminum, galvanized steel etc.). Applied by spraying, brushing, wiping or dipping process. Picklex® 20 does not cover up rust.

  • Metal surface cleaner: Cleans light mill oil, cutting fluid dust

  • Surface rust/flash rust remover: Does not etch the metal surface and therefore the metal surface stays intact

  • Rust converter: Converts 100% rust and scale (pitted rust and heat scale such as mill scale) on the metal surface to a pre-treatment/conversion coating, ready for welding & finishing

  • Rust inhibitor: Picklex® 20 coating provides a very long-term indoor rust prevention (in terms of several years).


Tips for Melt Pressure Transducers

Proper installation and maintenance are the key to optimum transducer performance and longevity. Follow these tips to obtain accurate, reliable melt pressure measurements.

Melt-pressure transducers are used to improve extruder output and melt quality, improve production safety, and protect your machinery. Meeting product quality specifications such as part dimensions and surface finish with minimal material waste requires maintaining optimum processing pressure during production.

Transducers are sensitive components that are easily damaged if not installed and maintained correctly. Following a few simple guidelines will help ensure the longevity of your sensors and enable you to get accurate, reliable measurements.


Comparision of Thermistors, Thermocouples and RTD's

Which Sensor? Thermistor, RTD or Thermocouple

The concept of temperature

From a physical point of view, heat is a measure of the energy contained in a body due to the irregular motion of its molecules or atoms. Just as a tennis ball possesses more energy with increasing speed, so the internal energy of a body or gas increases with increasing temperature. Temperature is a variable which together with other parameters such as mass and specific heat describes the energy content of a body.

The basic measure of temperature is the degree Kelvin. At 0ºK(elvin) the molecules of every body are at rest and it no longer has any thermal energy. There is therefore no possibility of negative temperatures since there cannot be a state of lower energy.

In every-day use it is general practice to use the Celsius scale (previously Centigrade). Its zero is placed at the solidification point of water since this point is very simple to reproduce in practice. Now 0ºC is by no means the lowest possible temperature as everyone knows from experience. By extending the Celsius scale to the lowest possible temperature where all molecular movement ceases we reach a temperature of -273.15 degrees.


RD3H Extruder Rupture Disk

The RD3H Extruder Rupture Disk is designed for emergency relief of excess pressure in plastics processing machinery. It is designed to instantaneously rupture at a predetermined pressure.

The RD3H Extruder Rupture Disk has a 3" stem, Hex Head and a 1/2-20 UNF thread. The RD3H is available in a wide variety of burst pressures and is typically a stock item.

  • Burst pressures from 1,500 to 15,000 psi
  • All stainless steel body and disk
  • Standard 1/2-20 UNF mounting thread

DYNAMIC DESCALER® Works On Limescale, Water Scale And More!

DYNAMIC DESCALER® (Bio Descale as it is known in Europe) is the world's fastest, safest and leading Biodegradable Descaler that is designed to dissolve the toughest water scale, limescale, mud and rust deposits from any piece of water-based equipment. Get rid of water scale, lime scale and other mineral deposits!

Whether you are descaling heat exchangers, chillers, condensers, pumps, cooling towers, boilers, tubes, pipes or any equipment that comes in contact with water, DYNAMIC DESCALER® (Bio Descale) is the Biodegradable Descaler of choice. Water scale on any heat transfer surface reduces the effectiveness of that heat transfer. This results in reduced equipment efficiency while increasing energy consumption, increasing costs and even increasing plant downtime.


Weatherproof Alarm & Overfill Protection Device

The Model AL201 is ULC listed: CAN/ULC-S661-10 Standard for Overfill Protection Devices for Flammable and Combustible Liquid Storage Tanks AL201 is a family of alarm panels with provision for one to ten inputs and optional relay outputs.

The panel must be mounted in a non-hazardous location. The white pilot light indicates the 120 VAC power. A red pilot light provides the visual alarm indication for each alarm contact. The red light remains on until the alarm condition is corrected. The alarm circuit resets automatically.


Gas Flow Meter FC1223

The FC1223 gas flow meter is specifically developed for flare gas and associated gas flow measuremement where conventional ultrasonic gas flow meters are experiencing problems due to high turbulence or presence of liquids. The FC1223 is an efficient gas accounting system which brings together high performance, reliability and low cost.

The design is based on proprietary ultrasonic transit-phase measurement method with in-line positioning of trasducers (no beam reflections). Besides volumetric flow, the "M" version, model FC1223-M, addionally offers molecular weight & mass flow measurement.

<< Learn More >> << Another Kentron Product >>


Celesco Low Cost Stringpot

The SP3 from Celesco is a compact, economical stringpot that provides a user selectable 4-20 mA or 0-10 Vdc output signal. Simply install this sensor using the handy mounting bracket and connect the appropriate wires for the desired ouput.

The SP3 is constructed with a rugged, water resistant polycarbonate body that has been compactly designed for tight spaces and generous measuring cable misalignment. With 4 different ranges, the SP3 is a perfect solution for many applications from light industrial to OEM. Just like all of our other SP and SE models, the SP3 is in stock ready to ship.


Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>