July 12, 2016  
www.process-news.com   

Process News Web Site  | Advertising Opportunities | Add Me | Remove Me | Products | Library | View Newsletter Online

Industrial Thermocouples & RTD Assemblies

The Industrial Thermocouples and RTD Assemblies are manufactured using high quality contamination and chemical resistant mineral insulated RTD and thermocouple cable. Industrial Thermocouples and RTD Assemblies have higher temperature capabilities up to (3000ºF) and insure trouble free operation where with minimum failure. Industrial Thermocouples and RTD Assemblies can be manufactured with a single sensor, dual or multipoint sensors and in various diameters from .010" to 1.125" in diameter with a large variety of termination's like explosion proof heads, FDA (food) Terminal Head or with leads and plugs. Most designs can be made for more information consult HCS.

>> Learn More << << Another HCS Product >>
 


MantaRay Portable Area-Velocity Flow Meter

The MantaRay Portable Area-Velocity Flow Meter measures flow in open channels, partially filled and surcharged pipes using an ultrasonic sensor. It's designed for monitoring stormwater, sewage, industrial effluent, irrigation water and natural streams. The MantaRay displays and datalogs flow rate and total flow and connects to samplers, SCADA and telemetry systems.

Calibration is simple: enter the pipe diameter or channel dimensions and the MantaRay automatically computes and displays the flow rate and total on its backlit LCD display. 
Mount the sensor at the bottom of the pipe or channel and hang the IP67 electronics case above the high water level.


  Walchem W600 Water Treatment Controller

Take Control Now and Connect with the Best!

The W600 series provides reliable, flexible and powerful control for your water treatment program.

  • Large touchscreen display with icon based programming makes setup easy
  • Universal sensor input provides extraordinary flexibility; the same controller can be used with almost any type of sensor needed
  • Optional dual analog (4-20 mA) input for Fluorometers or nearly any other process value
  • Multiple language support allows simple setup no matter where your business takes you
  • Six control outputs allow the controller to be used in more applications
  • Economical wall-mount package for easy installation


Vortex Tubes For Spot Cooling From Nex Flow

Vortex tubes are devices that work on a standard compressed air supply. Air enters the vortex tube and literally splits the air flow into two parts - cold air at one end, and hot air at the other - all without any moving parts.

There are two basic physical sizes of vortex tubes used extensively in industry the small (C Series) and medium size (H Series). A larger version is available on special order. Vortex tubes can be selected by required performance in cooling for the "H" generator versions and where very cold temperatures are required "C" generators are used. However, even with "C" generators, as expected, the higher the flow rating the greater the cooling effect.

Nex Flow™ stainless steel vortex tubes use a metal (brass) generator as a standard item rather than cheap plastic for longer life and for applications in high temperature environments. (competitors would charge extra for that feature.) With virtually no moving parts, Vortex Tubes take compressed air and converts it to cold air at one end and hot air at the other. Temperature as low as -50ºF (-46ºC) can be achieved at the cold end and up to 260º F (127ºC) at the hot end.

Vortex tubes are used to cool electronic controls, machining operations, spot cooling and more.


Cleveland SXT Series Side Entry Mixers

Side-entering mixers SXT Series work efficiently where a tank is too large for convenient installation of a top-entering mixer, or where headroom is severely limited. Side Entry mixers are less expensive than top entry mixers in large tank installations because the long shafts required by extremely tall tanks are eliminated.

In the case of very large tanks, several smaller side entry mixers may be more efficient and economical than a single, larger unit.

The SXT design incorporates a trouble and maintenance free gear drive, unlike belt driven models where frequent belt adjustment or replacement is required. The SXT Series is ideal for process applications involving continuous blending, heat transfer, mass transfer, or solids suspension. It provides cost effective agitation of medium to low viscosity fluids in large storage tanks.


Top Valve Back Pressure & Pressure Relief Valves Now Certified to NSF-61

Primary Fluid Systems Inc. has recently attained certification for its Top Valve brand of back pressure and pressure-relief valves. Available in various sizes, connections, and materials, Top Valve can be customized to systems’ needs. Top Valve is also available in high temperature and high pressure models.

NSF/ANSI-61 ensures the quality and material of products which come in contact with drinking water. It ensures that the product meets all regulatory requirements for the USA and Canada.

Primary Fluid Systems is anticipating approval for its remaining product lines over the course of 2016.


Adjustable Air Amplifiers

Adjustable Air Amplifiers from Nex Flow™ Air Products Corp., are a simple, inexpensive devices with virtually no maintenance that can convey fumes, of air for cooling, blowoff and drying applications. They use the "coanda effect" which entrains a large amount of surrounding air using only a small amount od compressed air. The effect is an amplification of up to 17 times the airflow or more (depending on the size) with reduced noise levels. Using only compressed air, the output flow and vacumm is easily controlled by adjusting or opening the air gap and/or inlet pressure. Either end of the air amplifier may be ducted to address all kinds of applications from bringing in fresh air into an area to removing nasty fumes. Be wary of unrealistic or unsubstantiated amplification ratios claimed by some companies.


6" & 12" Extruder Rupture Disks With M18 x 1.5 Mounting Thread

The RD6H-M18 Extruder Rupture Disks are designed for emergency relief of excess pressure in plastics processing machinery. It is designed to instantaneously rupture at a predetermined pressure.

The RD6H-M18 Extruder Rupture Disk have a 6" stem, Hex Head and a M18 x 1.5 mounting thread. The RD6H-M18 is available in a wide variety of burst pressures and is typically a stock item.

The RD12H-M18 Extruder Rupture Disk is designed for emergency relief of excess pressure in plastics processing machinery. It is designed to instantaneously rupture at a predetermined pressure.

The RD12H-M18 Extruder Rupture Disk has a 12" stem, Hex Head and a M18 x 1.5 mounting thread. The RD6H-M18 is available in a wide variety of burst pressures and is typically a stock item.


Thermohygrograph - Temperature/Humidity Recorders

Use our thermohygrographs when ever you need a record of humidity and temperature conditions. Just put them in place and start recording, no connections, not even a power cord. That's faster, easier and likely less expensive than electronic instrumentation and data loggers.

Because we can supply them with traceable humidity and temperature certification and these recorders are easily transported to our Toronto plant for re-certification they may be ideal to meet your QA requirements. Applications include laboratories, clean rooms, museums, libraries, warehouses, environmental chambers and humidity sensitive production areas. The sensing elements are located inside a sturdy housing, well protected from mechanical damage. Since the transmission mechanism has minimal friction and is insensitive to shocks and temperature changes, correct readings of atmospheric conditions are guaranteed.


Tips for Melt Pressure Transducers

Proper installation and maintenance are the key to optimum transducer performance and longevity. Follow these tips to obtain accurate, reliable melt pressure measurements.

Melt-pressure transducers are used to improve extruder output and melt quality, improve production safety, and protect your machinery. Meeting product quality specifications such as part dimensions and surface finish with minimal material waste requires maintaining optimum processing pressure during production.

Transducers are sensitive components that are easily damaged if not installed and maintained correctly. Following a few simple guidelines will help ensure the longevity of your sensors and enable you to get accurate, reliable measurements.


3 Inch Air-Blade™ Air Knife Blow Off System

The 3 Inch Air-Blade™ Air Knife Model 10003 Blow Off System from Nex Flow™ is easy to mount and maintain and reduces both compressed air consumption and noise levels.

The 3 Inch Stainless Steel Air-Blade™ Air Knife Model 10003S Blow Off System from Nex Flow™ produces a “laminar” flow of air along its length using the ”Coanda” effect which “entrains” a large volume of air from the surrounding area along with the small amount of compressed air from the Air-Blade™ to produce an output flow up to 30 times.

Air-Blade™ Air Knife Blow Off System payback on compressed air savings can be as soon as a few weeks in some applications.

Nex Flow™ Mounting Systems for air knives and air amplifiers provide a convenient and flexible way to utilize the products for blow-off and cooling applications.


Gas Flow Meter FC1223

The FC1223 gas flow meter is specifically developed for flare gas and associated gas flow measuremement where conventional ultrasonic gas flow meters are experiencing problems due to high turbulence or presence of liquids. The FC1223 is an efficient gas accounting system which brings together high performance, reliability and low cost.

The design is based on proprietary ultrasonic transit-phase measurement method with in-line positioning of trasducers (no beam reflections). Besides volumetric flow, the "M" version, model FC1223-M, addionally offers molecular weight & mass flow measurement.

<< Learn More >> << Another Kentron Product >>


Static Weighing With Ramsey Micro-Tech 3000

The Ramsey Micro-Tech 3000 Series of electronic instruments signifies a new approach to scale instrumentation, giving you more flexibility and vastly increased upgrade capabilities. Each model is designed for your specific weighing application, and because all models utilize a common platform, you only need to become familiar with one basic interface.

The Ramsey Micro-Tech series of instruments is suitable for production/consumption monitoring and control in many industries such as mining, cement, coal, ceramics, food, chemicals and more, for applications utilizing:

  • Load cell static weighing systems
  • Grain overload controls
  • Multi-component static batch weighers and feeders


Celesco Low Cost Stringpot

The SP3 from Celesco is a compact, economical stringpot that provides a user selectable 4-20 mA or 0-10 Vdc output signal. Simply install this sensor using the handy mounting bracket and connect the appropriate wires for the desired ouput.

The SP3 is constructed with a rugged, water resistant polycarbonate body that has been compactly designed for tight spaces and generous measuring cable misalignment. With 4 different ranges, the SP3 is a perfect solution for many applications from light industrial to OEM. Just like all of our other SP and SE models, the SP3 is in stock ready to ship.


Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>