December 13, 2016  
www.process-news.com   

Process News Products | Process Newletter Library | View Newsletter Online

Circulation Heaters: Electric Circulation Heaters for Gases and Liquids

Circulation heaters are used when a pressurized, circulating fluid needs to be heated. A flanged immersion heater, or a screw plug immersion heater is inserted into a into a pressure vessel. This vessel may also be called a pipe body. The fluid passing though this circulation heater will raise to the desired temperature. This heating approach greatly enhances normal immersion heaters by offering a method to give you heat on demand. Many temperature control options give you can get the exact temperature control of the heated fluid.

Circulation heaters are ideal for pre-heating fuel oil, pumping viscosity and closed loop heat transfer systems or boosting the temperature of a gas. Standard ratings from 1.5 to 465 kW in various watt densities, sheath materials, chamber materials and pressure ratings.

<< Learn More >> << Another HCS Product >>


TTFM 1.0 Transit Time Ultrasonic Flowmeter

Accurately measure the flow rate of clean, non-aerated liquids like water, chemicals, and oils in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display along with totalizer and signal strength. Use the built-in control relays for flow alarms or flow proportionate pulse. Connect the isolated 4-20mA output to PLC's or controllers.

The TTFM 1.0 works on a wide range of pipe sizes and materials including carbon steel, stainless steel, ductile iron, cast iron, PVC, PVDF, fiberglass, copper, brass, aluminum and pipes with bonded liners including epoxy, rubber and Teflon.


  Walchem W600 Water Treatment Controller

Take Control Now and Connect with the Best!

The W600 series provides reliable, flexible and powerful control for your water treatment program.

  • Large touchscreen display with icon based programming makes setup easy
  • Universal sensor input provides extraordinary flexibility; the same controller can be used with almost any type of sensor needed
  • Optional dual analog (4-20 mA) input for Fluorometers or nearly any other process value
  • Multiple language support allows simple setup no matter where your business takes you
  • Six control outputs allow the controller to be used in more applications
  • Economical wall-mount package for easy installation


DYNAMIC DESCALER® Works On Limescale, Water Scale And More!

DYNAMIC DESCALER® (Bio Descale as it is known in Europe) is the world's fastest, safest and leading Biodegradable Descaler that is designed to dissolve the toughest water scale, limescale, mud and rust deposits from any piece of water-based equipment. Get rid of water scale, lime scale and other mineral deposits!

Whether you are descaling heat exchangers, chillers, condensers, pumps, cooling towers, boilers, tubes, pipes or any equipment that comes in contact with water, DYNAMIC DESCALER® (Bio Descale) is the Biodegradable Descaler of choice. Water scale on any heat transfer surface reduces the effectiveness of that heat transfer. This results in reduced equipment efficiency while increasing energy consumption, increasing costs and even increasing plant downtime.


 Flowmeters from KROHNE

As founder and world market leader in electromagnetic flowmeter technology, we have been impressing our customers with innovation for more than 45 years, innovations that continue to set the standard for the competition. Our OPTIFLUX product line is an excellent example of this: a converter for all applications. A one-of-a-kind diagnostics package that can even look into the process. An intuitive operating concept featuring a quick start function for simple start-up.

When it comes to Coriolis mass flowmeters, excellent measuring technology should not be a question of budget. That’s why our engineers have developed a cost-effective device, the OPTIMASS 1300, with a whole series of features normally reserved for high-tech devices.

The experience gained from the OPTIMASS 7000 series was naturally included in development. Which means that there are no longer any special installation regulations for the OPTIMASS 1300. Another highlight is definitely the diagnostics platform, which is unique in this class of device. It not only monitors the device itself but also the process and the process environment.


Top Valve Back Pressure & Pressure Relief Valves Now Certified to NSF-61

Primary Fluid Systems Inc. has recently attained certification for its Top Valve brand of back pressure and pressure-relief valves. Available in various sizes, connections, and materials, Top Valve can be customized to systems’ needs. Top Valve is also available in high temperature and high pressure models.

NSF/ANSI-61 ensures the quality and material of products which come in contact with drinking water. It ensures that the product meets all regulatory requirements for the USA and Canada.

Primary Fluid Systems is anticipating approval for its remaining product lines over the course of 2016.


ArGo Stack Turner - Paper Stack Turner

The ArGo Stack Turner - Paper Stack Turner is the ideal solution for turning loads and handling goods. A versatile machine that combines the dynamism of fork lift trucks with the versatility of the most modern stack turners. Low-cost and easy to use, it is the fitting answer to the needs of small and medium enterprises.

ArGo Stack Turner turns stacks of paper in less than a minute without compressing them and takes them directly to under the printing machine.

ArGo easily exchanges the various pallets, also separating the stacks and distributing them over several pallets.

ArgGo moreover works with variable stacks of any size and material: punched paper, PVC sheets and booklets.


Extruder Rupture Disks

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI.

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are offered with several mounting thread styles that are commonly found on plastics processing machinery.


Temperature Transmitter 2-Wire Economy RTD Hockey Puck Style

This is the one transmitter you need to stock for all your maintenance needs. Using your PC and the available software simply program this transmitter for any one of 7 RTD or 13 thermocouple types or customize the calibration linearization at up to 40 points to fit none standard transmitter outputs.

The output signal can be inverted and can be programmed to be linear with temperature or linear with resistance or mV input. Features include a 7mm central hole for easy spring loading of 1/4" tube, insulating barriers between terminals to prevent shorts and a captive cover on programming pins to keep them clean.


6" & 12" Extruder Rupture Disks With M18 x 1.5 Mounting Thread

The RD6H-M18 Extruder Rupture Disks are designed for emergency relief of excess pressure in plastics processing machinery. It is designed to instantaneously rupture at a predetermined pressure.

The RD6H-M18 Extruder Rupture Disk have a 6" stem, Hex Head and a M18 x 1.5 mounting thread. The RD6H-M18 is available in a wide variety of burst pressures and is typically a stock item.

The RD12H-M18 Extruder Rupture Disk is designed for emergency relief of excess pressure in plastics processing machinery. It is designed to instantaneously rupture at a predetermined pressure.

The RD12H-M18 Extruder Rupture Disk has a 12" stem, Hex Head and a M18 x 1.5 mounting thread. The RD6H-M18 is available in a wide variety of burst pressures and is typically a stock item.


Picklex® 20 - Metal Surface Cleaner - Surface Rust Remover

Picklex® 20 acts as a metal surface cleaner, surface rust remover, 100% rust converter, very long term rust inhibitor, pre-treatment/conversion coating and a sealer, for any ferrous & non-ferrous metal surface, such as carbon steel, stainless steel, aluminum, galvanized steel etc.). Applied by spraying, brushing, wiping or dipping process. Picklex® 20 does not cover up rust.

  • Metal surface cleaner: Cleans light mill oil, cutting fluid dust

  • Surface rust/flash rust remover: Does not etch the metal surface and therefore the metal surface stays intact

  • Rust converter: Converts 100% rust and scale (pitted rust and heat scale such as mill scale) on the metal surface to a pre-treatment/conversion coating, ready for welding & finishing

  • Rust inhibitor: Picklex® 20 coating provides a very long-term indoor rust prevention (in terms of several years).


Midget Model 277 Pneumatic Indicator

The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks.

Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges.

These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale.


Kistler Model 7013C Quartz Pressure Sensor

The quartz pressure sensor Kistler Model 7013C is an industrial sensor for measuring cylinder pressures in internal combustion engines. Sensor and cable together form and oil- and splash-proof unit. Suitable for longtime measurements and arduous duties.

The use of polystable quartz elements assures security from twinning even under high mechanical stressing. As a result, the sensitivity remains largely constant between -50ºC and 350ºC.

Applications including measuring in combustion chambers under severe conditions of fouling, moisture, etc. Special design makes the sensor largely insensitive to combustion residues and therefore, suitable for arduous duties as well as longtime measurements. Can be fitted without adapter into an indicator hole. A Piezotron version is available as Type 7613C.


Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>