December 27, 2016  
www.process-news.com   

Process News Products | Process Newletter Library | View Newsletter Online

Custom Control Panels

Custom Control Panels, Temperature Control Panels for a wide variety of applications are manufactured by Heaters Controls And Sensors. We provide Custom Control Panels, Temperature Control Panels that are needed to operate in 60ºC environments, to laboratory controllers that are to maintain temperatures within +/- 0.01ºC.

These Custom Control Panels, Temperature Control Panels could be made to withstand washdowns with corrosive chemicals with all components on the panel conforming to IP 65 and NEMA 4X. Integration of components for steam booster heaters or recirculation heaters with flow fail safe interlocks are also available.

<< Learn More >> << Another HCS Product >>
 


 

PDFM 5.1 Portable Doppler Flow Meter

It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 5.1 is fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 5.1 works on any liquid containing bubbles or solids and is recommended for "difficult liquids" like wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. Measures flow through most metal and plastic pipes including PVC, ductile iron, carbon steel and stainless steel.

The PDFM 5.1 Portable Doppler Flow Meter employs the latest technology in Doppler signal processing. Faster processing, higher data resolution and an improved ability to filter out noise, all combine to produce data accuracy far greater than previously possible.


 

  TK/TKS/TKP/TKM Series Paddlewheel Flow Meter

The Truflo® Paddlewheel Flow Meter provides High Accuracy at Low Cost and is ideal for plastic piping. The Truflo® consists of a rugged true union industrial design that is suitable for corrosive applications with virtually NO pressure drop. The TKS series provides a 1 amp selectable output Relay that can be used as an alarm for high or low flow rate conditions

High Accuracy Less than ± 1.0% of Full Scal
•Unit of Flow Measurement is Selectable (Liter/Gallon/Kilo-liter)
•Corrosion Resistant Materials PVC/PP/316SS
•Low Cost Visual Indication


 

Air Jets

Air Jets are larger than nozzles and used when a wider area needs to be hit with the amplified air. They are significantly more efficient than nozzles although often use as much compressed air. Their best use is to replace pairs of nozzles that are used for part ejection or for blow-off applications that require greater force than that provided by air knives or air movers.

Nozzles are for point use while air jets can fan out somewhat for better continuous blow-off when a row of them are made. Nex Flow air jets are all made adjustable with a lock ring to assure the security of any gap setting.

They have a female 1/8” NPT and made lightweight with anodized aluminum.


 

 Cleveland SXT Series Side Entry Mixers

Side-entering mixers SXT Series work efficiently where a tank is too large for convenient installation of a top-entering mixer, or where headroom is severely limited. Side Entry mixers are less expensive than top entry mixers in large tank installations because the long shafts required by extremely tall tanks are eliminated.

In the case of very large tanks, several smaller side entry mixers may be more efficient and economical than a single, larger unit.

The SXT design incorporates a trouble and maintenance free gear drive, unlike belt driven models where frequent belt adjustment or replacement is required. The SXT Series is ideal for process applications involving continuous blending, heat transfer, mass transfer, or solids suspension. It provides cost effective agitation of medium to low viscosity fluids in large storage tanks.


 

ACCUDRAW PVC Calibration Cylinders Now Certified to NSF-61

Primary Fluid Systems Inc. has recently attained certification for its Accudraw PVC calibration cylinders. Available in a variety of sizes and connections, Accudraw cylinders can be customized to systems’ needs. Accudraw Calibration Cylinders were developed for the accurate calibration of metering pumps.

NSF/ANSI-61 ensures the quality and material of products which come in contact with drinking water. It ensures that the product meets all regulatory requirements for the USA and Canada.

Primary Fluid Systems is anticipating approval for its remaining product lines over the course of 2016.


 

Dust Collection and Fume Extraction System

The Model 40002FMS STREAM VAC™ is a versatile and affordable compact air cleaning system is ideal for the removal of fumes, dust and other air pollution from work stations without the need for heavy and bulky machinery.

The Nex Flow™ Stream Vac™ is an in line air conveyor that when hooked up to a 2” hose up to 25 feet (8 meters) and connected to a compressed air line, it will remove up to several hundred cubic feet of air while using only a minimal amount of compressed air, taking with it welding fumes, soldering fumes, particulate from local grinding operations, smoke and particulate from almost any “spot” application.


 

 Extruder Rupture Disks

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI.

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are offered with several mounting thread styles that are commonly found on plastics processing machinery.


 

Aqua-Boy Moisture Meter

The Aqua-Boy Moisture Meter measures the moisture content of many solid materials quickly and accurately. It provides a direct read-out of percent moisture in seconds. The extensive selection of probes available suits the Aqua-Boy Moisture Meter to very many materials.

Aqua-Boy Moisture Meter is designed for easy portability, fast operation with instantaneous indication and universal use. They are compact, handy units supplied with accessories, in a carrying case.

The measuring principle of the AQUA BOY is based on the electrical conductivity of the material which always bears a fixed relation to the moisture.


 

Rigid Stem Melt Pressure Guage

ONEhalf20 Melt Pressure Gauge RTG6 is the ideal choice for extrusion processors requiring a simple, reliable and accurate maintenance free melt pressure measurement. This rugged, totally self-contained Melt Pressure Gauge is available in either 0-5,000 psi or 0-10,000 psi ranges. This Melt Pressure Gauge allows the user to benefit from the improved efficiency and quality that goes along with melt pressure measurement at an affordable price.

ONEhalf20 Melt Pressure Gauge RTG6 comes standard with a 6" rigid stem, and a 1/2-20 UNF mounting thread.


 

Ultrasonic Leak Detector

The Nex Flow™ Ultrasonic Leak Detector is the ideal maintenance yool to reduce rompressed air costs due to leaks. Typically only 50% of a compressor’s air is used for production and the rest is “lost” though waste and air leaks. According to the U.S. Department of Energy “Ultrasonic technology is the best method for finding leaks and verifying repairs.”

The better the system, the more leaks you find and the more money you save! Always beware of cheap ultrasonic leak detector that just may not do the job.


 

Static Weighing With Ramsey Micro-Tech 3000 Series

The Ramsey Micro-Tech 3000 Series of electronic instruments signifies a new approach to scale instrumentation, giving you more flexibility and vastly increased upgrade capabilities. Each model is designed for your specific weighing application, and because all models utilize a common platform, you only need to become familiar with one basic interface.

The Ramsey Micro-Tech series of instruments is suitable for production/consumption monitoring and control in many industries such as mining, cement, coal, ceramics, food, chemicals and more, for applications utilizing:

•Load cell static weighing systems
•Grain overload controls
•Multi-component static batch weighers and feeders


 

Low Profile Single Point Load Cells

Low Profile Single Point Load Cells Tedea-Huntleigh Model 1040-41 are designed for direct mounting of low cost weighing platforms.

Low Profile Single Point Load Cells Tedea-Huntleigh Model 1040-41 small physical size, combined with high accuracy and low cost, makes these load cells ideally suited for retail, bench and counting scales.


 

Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>