January 24, 2017

www.process-news.com

Process News Products | Process Newletter Library | View Newsletter Online

PTF06 Series Pressure Transmitters

PTF06 Series Pressure Transmitters are very accurate and reliable instruments, which convert pressure inputs to current or voltage signals. These transmitters are equipped with a damping element to direct away pressure peaks or liquid hammering from their sensors; hence showing a high level of resistance to mechanical shocks. The typical response time of the PTF06 transmitter is 1 ms, and will never exceed 5 ms, even when the damping element is functioning and the fluid viscosity is at its peak.

The industrial PTF106 Pressure Transmitter meets the electromagnetic compatibility (EMC) requirements of IEC61000-6-2 and IEC61000-6-3.

<< Learn More >> << More HCS Products >>

MantaRay Portable Area-Velocity Flow Meter

The MantaRay Portable Area-Velocity Flow Meter measures flow in open channels, partially filled and surcharged pipes using an ultrasonic sensor. It's designed for monitoring stormwater, sewage, industrial effluent, irrigation water and natural streams. The MantaRay displays and datalogs flow rate and total flow and connects to samplers, SCADA and telemetry systems.

Calibration is simple: enter the pipe diameter or channel dimensions and the MantaRay automatically computes and displays the flow rate and total on its backlit LCD display. Mount the sensor at the bottom of the pipe or channel and hang the IP67 electronics case above the high water level.

Walchem W600 Water Treatment Controller

Take Control Now and Connect with the Best!

The W600 series provides reliable, flexible and powerful control for your water treatment program.

  • Large touchscreen display with icon based programming makes setup easy
  • Universal sensor input provides extraordinary flexibility; the same controller can be used with almost any type of sensor needed
  • Optional dual analog (4-20 mA) input for Fluorometers or nearly any other process value
  • Multiple language support allows simple setup no matter where your business takes you
  • Six control outputs allow the controller to be used in more applications
  • Economical wall-mount package for easy installation

OPTIMASS 1000 Mass Flowmeter From KROHNE

The OPTIMASS 1000 is the cost effective solution for accurate measurement for a variety of applications. The OPTIMASS 1000 reliably measures massflow, density, volume, temperature, volume concentration or solid content.

  • Innovative twin measuring tubes
  • Easily drained and easy to clean
  • Resistant to installation and process effects
  • Long working life.
  • Optimised flow divider for minimum pressure loss.
  • High levels of accuracy means an excellent price / performance ratio.
  • Modular electronics with data redundancy - "plug & play" replacement of electronics

ACCUDRAW PVC Calibration Cylinders Now Certified to NSF-61

Primary Fluid Systems Inc. has recently attained certification for its Accudraw PVC calibration cylinders. Available in a variety of sizes and connections, Accudraw cylinders can be customized to systems’ needs. Accudraw Calibration Cylinders were developed for the accurate calibration of metering pumps.

NSF/ANSI-61 ensures the quality and material of products which come in contact with drinking water. It ensures that the product meets all regulatory requirements for the USA and Canada.

Primary Fluid Systems is anticipating approval for its remaining product lines over the course of 2016.

Ramsey™ Oretronic III Tramp Metal Detector

Tramp metal can stop your operation and the damage it can cause to equipment can be expensive. That's why conscientious operators and owners consider tramp metal detectors to be an essential part of their operation. The Thermo Scientific Ramsey Oretronic III Tramp Metal Detector provides an economical and reliable means to protect expensive crushers, conveyors and other process equipment from damage by tramp metal.

Protect expensive crushers, conveyors and other process equipment from damage by tramp metal using the Thermo Scientific™ Ramsey™ Oretronic III Tramp Metal Detector. Offering economically reliable metal detection, the Ramsey Oretronic III Tramp Metal Detector is able to detect all types of metallic scrap including bucket teeth, manganese steel mantles, bore crowns, bar scrap, chains and tools.

Extruder Rupture Disks

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI.

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are offered with several mounting thread styles that are commonly found on plastics processing machinery.

Split Core Current Sensors

Split Core Current Sensors Model SC225 is our easiest to install fixed setpoint current operated solid state status sensor for status indication.

The one unit is pre-set to switch at 1.5 amps and will switch either AC or DC loads. This flexible design eliminates installation problems. It is not possible to incorrectly set the trip point or install a DC unit when an AC load should be switched.

Split Core Current Sensors Model SC225 design means that retrofit installations are simplified since power does not have to be shut off and connections do not have to be broken.

RTG6MA or V Melt Pressure Gauge With Transmitter Outputs

RTG6MA or V Melt Pressure Gauge is the ideal choice for extrusion processors requiring a simple, reliable and accurate maintenance free melt pressure measurement. This rugged, totally self-contained Melt Pressure Gauge is available in either 0-5,000 psi or 0-10,000 psi ranges.

This Melt Pressure Gauge allows the user to benefit from the improved efficiency and quality that goes along with melt pressure measurement at an affordable price. The ONEhalf20 Melt Pressure Gauge Model RTG6MA or V offers either a 4-20mA or 0-10Vdc output utilizing the Bendix style 6 pin bayonet connector. This output enables the user to also connect this gauge to a remote PLC or DCS device for melt pressure monitoring.

Stress Analysis Strain Gages

Bondable foil strain gages (strain gauges) available in thousands of possible pattern designs and combinations of grid alloys, backing materials, resistances, and options.

Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>