February 7, 2017

www.process-news.com

Process News Products | Process Newletter Library | View Newsletter Online

Industrial Thermocouples & RTD Assemblies

The Industrial Thermocouples and RTD Assemblies are manufactured using high quality contamination and chemical resistant mineral insulated RTD and thermocouple cable. Industrial Thermocouples and RTD Assemblies have higher temperature capabilities up to (3000ºF) and insure trouble free operation where with minimum failure. Industrial Thermocouples and RTD Assemblies can be manufactured with a single sensor, dual or multipoint sensors and in various diameters from .010" to 1.125" in diameter with a large variety of termination's like explosion proof heads, FDA (food) Terminal Head or with leads and plugs. Most designs can be made for more information consult HCS.

>> Learn More << << Another HCS Product >>


 

PSL 5.0 Hybrid Pump Station Level Controller

Ideal for sewage pump stations, lift stations, wet wells and tank level control with a non-contacting ultrasonic sensor mounted above the liquid. The new Greyline PSL 5.0 Level Controller has 6 independently programmable control relays for pump or valve control, level alarms, dialers, temperature alarm and echo-loss alarm.

Mount the non-contacting, ultrasonic sensor in the tank or wet well and install the watertight electronics in the control room or any location within 500 ft / 150 m. Use the simple menu system and built-in keypad to set up measurement range, relay set points and pump alternation sequence. A relay/pump run time report is updated and stored automatically for viewing on the PSL 5.0 backlit LCD display.

For hazardous locations, the ultrasonic sensor is rated Intrinsically Safe with an optional safety barrier. It is rated for measurement ranges up to 32 ft / 10 m, or use the optional PVC Sensor rated for 50 ft / 15.6 m measurement range.

<< Learn More >> << Another Greyline Product >>


 

Sensorex pH1000 Polycarbonate Laboratory pH Sensor

Whether you need to measure pH in your swimming pool, aquarium, or hydroponics garden, you need a probe that will deliver accurate measurements day in and day out. Our pH1000 polycarbonate pH sensor provides reliable, stable readings in a range of environments, from greenhouses to science classrooms. This sensor stands up to the usual wear and tear with its durable polycarbonate body and built-in protection for the pH glass measuring surface. Compatible with all pH meters accepting a BNC connector.

  • Very fast response time
  • No maintenance required
  • Durable construction
  • Instantly ready for use
  • One year limited warranty

<< Learn More >> << More Metex Products >>


 

MicroVision Cooling Tower Controller from Pulsafeeder

The MicroVision Cooling Tower Controller delivers comprehensive boiler water control with plug & play simplicity, at outstanding value. This latest addition to the MicroVision family of controllers is configured specifically for boiler water control, and utilizes intuitive software which provides simple set-up, while providing state of the art maintenance of the water in your boiler.

Features of this device include a reliable temperature compensated conductivity probe, 5 output relays with selectable timers, scalable 4-20mA output to report conductivity, hall-effect and pulse water meter inputs and digital drum levels or a flow switch.

  • Reliable Conductivity Probe
  • 3 Powered Relays for Chemical Metering Pumps
  • Powered Relay for Motorized Ball or Solenoid Blowdown Valves
  • Dry Contact Relay for Remote Alarm
  • 4-20A Output, Isolated and Scalable

<< Learn More >> << More Vissers Sales Products >>


 

Top Valve Back Pressure & Pressure Relief Valves Now Certified to NSF-61

Primary Fluid Systems Inc. has recently attained certification for its Top Valve brand of back pressure and pressure-relief valves. Available in various sizes, connections, and materials, Top Valve can be customized to systems’ needs. Top Valve is also available in high temperature and high pressure models.

NSF/ANSI-61 ensures the quality and material of products which come in contact with drinking water. It ensures that the product meets all regulatory requirements for the USA and Canada.

Primary Fluid Systems is anticipating approval for its remaining product lines over the course of 2016.

 

<< Learn More >> << Another Primary Fluid Systems Inc Product >>


 

Pump Controllers

Ktech Industrial Products Inc., Pump Controllers are installed to automatically operate a pump to control the level of a liquid in a tank.

Pump Controllers are used in conjunction with Ktech Multi-Level Float Switches.

Use two contacts to start and stop the pump. A relay circuit switches power to the fractional horsepower pump motor or to the three-phase contactor of a large pump motor. Similarly, the switch contacts can be used to operate solenoid valves.

Use additional contacts to indicate an alarm condition. These alarms provide an audible and visual signal. The audible signal can be muted after which the warning light remains on until the alarm condition is corrected.

<< Learn More >> << More Ktech Products >>


 

RD4H-5/8 Extrusion Rupture Disc

The RD4H-5/8 Extrusion Rupture Disc is designed for emergency relief of excess pressure in plastics processing machinery. It is designed to instantaneously rupture at a predetermined pressure.

The RD4H-5/8 Extrusion Rupture Disc has a 4" stem, Hex Head and a 5/8 - 11 NC mounting thread. The RD4H-5/8 is available in a wide variety of burst pressures and is typically a stock item.

  • Burst pressures from 1,500 to 15,000 psi
  • All stainless steel body and disc
  • 5/8 - 11 NC mounting thread

<< Learn More >> << Another OneHalf20 Product >>


 

Fuji PXR Series Digital Temperature Controllers

The PXR series comes in several sizes - 1/32 DIN, 1/16 DIN, 1/8 DIN and 1/4 DIN. Besides the standard features including auto-tuning and fuzzy logic, they also come with self-tuning. This innovative feature automatically retunes the controller under certain conditions without the need to revert to auto-tuning.

The standard 8-segment ramp/soak feature has been expanded to include two patterns that can be linked to create a 16 step profile. The PXR accepts temperature and process inputs and offers a choice of three kinds of outputs to meet a wide variety of process requirements. Low cost options include dual outputs, programmable alarms, remote setpoint, RS485 communications, analog retransmission, digital input, timer function, heater burnout alarm and 24V AC/DC supply voltage.

<< Learn More >> << Another Enercorp Product >>


 

IP144 Pressure Indicator from ONEhalf20

The IP144 Pressure Indicator offers a field selectable display and up to 2 configurable alarms, and dual LED display of PV and SV. The IP144 also offers optional 4-20mA or 0-10Vdc process pressure value re-transmission, and MODbus communications.

The IP144 pressure indicator is a standard 1/4 DIN (96 X 96 mm) package and is only 100mm deep.

  • 350 Ohm strain gauge input with scaleable units of measure
  • >Low cost unit with pushbutton programming with calibration feature

<< Learn More >> << Another OneHalf20 Product >>


 

Bistable Single Pole Battery Main Switch S250 Series

Reinforced thermoplastic - ISO10133 "MARINE" safe manual control - Similar description: battery master switch, battery switch, battery cut off switch, battery disconnect switch, battery main switch, master disconnect, battery disconnector, SPDS.

  • Products series : S250
  • Trademark : SODEREP-ECANS
  • Continuous Rating : 300A
  • Number of Poles : Single Pole
  • Nominal Voltage (V) : 24V

<< Learn More >> << Another Access Controls Product >>


 

Strain Indicator Recorder Vishay Model P3

The Model P3 Strain Indicator and Recorder is a portable, battery-operated instrument capable of simultaneously accepting four inputs from quarter-, half-, and full-bridge strain-gauge circuits, including strain-gauge-based transducers. Water- resistant grommets in the hinged cover allow the lid to be closed with leadwires attached. Designed for use in a wide variety of physical test and measurement applications, the P3 functions as bridge amplifier, static strain indicator, and digital data logger.

The Model P3 Strain Indicator and Recorder, utilizing a large LCD display for readout of setup information and acquired data, incorporates many unique operating features that make it the most advanced instrument of its kind.

<< Learn More >> << Another Intertechnology Product >>


 

Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>