March 7, 2017

www.process-news.com

Process News Products | Process Newletter Library | View Newsletter Online

Flanged Immersion Heaters

Flanged immersion heaters are used in large capacity vessels, in high pressure applications and are installed by bolting the unit to a matching flange welded to the vessel wall.

Flanged immersion heaters, both round flange and square flange models are a great choice for applications requiring larger wattages. Flanged immersion heaters are designed for installation into a pipe body, tank or pressure vessel using standard pipe size. These heaters are available in a wide selection of rates, sizes and sheath materials suitable for the heating requirements of water, air and other gases. Flanged immersion heaters are very efficient since all energy that is generated is dissipated directly into the medium which is being heated. All flanged heater models incorporate tubular heater construction welded or brazed into a carbon steel pipe flange. Nema 1 terminal enclosures are supplied with all standard units. Moisture resistant and explosion proof models are also available. All flanged immersion heaters we offer you including heaters for hazardous locations are CSA/NRTL and UL approved.

<< Learn More >> << Another HCS Product >>


 

PDFM 5.1 Portable Doppler Flow Meter

It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 5.1 is fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 5.1 works on any liquid containing bubbles or solids and is recommended for "difficult liquids" like wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. Measures flow through most metal and plastic pipes including PVC, ductile iron, carbon steel and stainless steel.

The PDFM 5.1 Portable Doppler Flow Meter employs the latest technology in Doppler signal processing. Faster processing, higher data resolution and an improved ability to filter out noise, all combine to produce data accuracy far greater than previously possible.


 

Hallett 13 Systems For Non-Potable Applications

Hallett UV wastewater purification systems, with patented Crossfire Technology, are engineered for simple, efficient multiplex configuration, and treat flows up to 1 MGD (3785 m/day) For Non-Potable Applications including Wastewater and Process Water. Hallett LPHO (low pressure high output) systems For Non-Potable Applications including Wastewater and Process Water outperform all conventional LPHO wastewater systems and most medium pressure systems with the ability to treat very low quality (low UV transmittance) wastewaters trouble free. Traditionally, low-quality wastewater effluents have required medium pressure systems to reach the required dose. The Hallett system For Non-Potable Applications including Wastewater and Process Water is the first of its kind and the only LPHO technology that matches and/or beats the performance of conventional medium pressure systems which are significantly more expensive from a capital and operating cost perspective. Each Hallett system For Non-Potable Applications including Wastewater and Process Water is factory sized and programmed to achieve target treatment requirements. Hallett systems are effective in a broad range of pre-treatment wastewater quality. They are also engineered to prevent operator exposure to potentially hazardous wastewater since no manual quartz cleaning is required.

<< Learn More >> << More Metex Products >>


 

Cleveland SXT Series Side Entry Mixers

Side-entering mixers SXT Series work efficiently where a tank is too large for convenient installation of a top-entering mixer, or where headroom is severely limited. Side Entry mixers are less expensive than top entry mixers in large tank installations because the long shafts required by extremely tall tanks are eliminated.

In the case of very large tanks, several smaller side entry mixers may be more efficient and economical than a single, larger unit.

The SXT design incorporates a trouble and maintenance free gear drive, unlike belt driven models where frequent belt adjustment or replacement is required. The SXT Series is ideal for process applications involving continuous blending, heat transfer, mass transfer, or solids suspension. It provides cost effective agitation of medium to low viscosity fluids in large storage tanks.

<< Learn More >> << More Vissers Sales Products >>


 

Top Valve Back Pressure & Pressure Relief Valves Now Certified to NSF-61

Primary Fluid Systems Inc. has recently attained certification for its Top Valve brand of back pressure and pressure-relief valves. Available in various sizes, connections, and materials, Top Valve can be customized to systems’ needs. Top Valve is also available in high temperature and high pressure models.

NSF/ANSI-61 ensures the quality and material of products which come in contact with drinking water. It ensures that the product meets all regulatory requirements for the USA and Canada.

Primary Fluid Systems is anticipating approval for its remaining product lines over the course of 2016.

<< Learn More >> << Another Primary Fluid Systems Inc Product >>


 

Weatherproof Alarm & Overfill Protection Device

The Model AL201 is ULC listed: CAN/ULC-S661-10 Standard for Overfill Protection Devices for Flammable and Combustible Liquid Storage Tanks AL201 is a family of alarm panels with provision for one to ten inputs and optional relay outputs.

The panel must be mounted in a non-hazardous location. The white pilot light indicates the 120 VAC power. A red pilot light provides the visual alarm indication for each alarm contact. The red light remains on until the alarm condition is corrected. The alarm circuit resets automatically.


 

NaK Filled Melt Pressure Transducers

The RTNAK6S NaK Filled Melt Pressure Transducer is designed specifically for food, packaging and medical processing applications. The Model RTNAK uses a special high temperature fill (NaK, potassium sodium) and an Inconel diaphragm to allow for pressure measurement in applications with process temperatures up to 1,000ºF. The unit features the industry standard 3.33 mV/Volt output and offers pin-to-pin compatibility with all competitor's models utilizing the Bendix style 6 pin bayonet connector.

The RTNAK6S NaK Filled Melt Pressure Transducer comes standard with a 6" rigid stem, and 1/2-20 UNF thread for mounting in standard transducer mounting holes

<< Learn More >> << Another OneHalf20 Product >>


 

Aqua-Boy Moisture Meter

The Aqua-Boy Moisture Meter measures the moisture content of many solid materials quickly and accurately. It provides a direct read-out of percent moisture in seconds. The extensive selection of probes available suits the Aqua-Boy Moisture Meter to very many materials.

Aqua-Boy Moisture Meter is designed for easy portability, fast operation with instantaneous indication and universal use. They are compact, handy units supplied with accessories, in a carrying case.

The measuring principle of the AQUA BOY is based on the electrical conductivity of the material which always bears a fixed relation to the moisture.

<< Learn More >> << Another Enercorp Product >>


 

CTG6S Melt Pressure Gauge Model Transducer Output

CTG6S Melt Pressure Gauge is the ideal choice for extrusion processors requiring a simple, reliable and accurate maintenance free melt pressure measurement. This rugged, totally self-contained Melt Pressure Gauge is available in either 0-5,000 psi or 0-10,000 psi ranges. This Melt Pressure Gauge allows the user to benefit from the improved efficiency and quality that goes along with melt pressure measurement at an affordable price.

The ONEhalf20 Melt Pressure Gauge Model CTG6S also offers the advantage of providing the industry standard 3.33 mv/Volt output utilizing the Bendix style 6 pin bayonet connector. This output enables the user to also connect this gauge to a remote panel mount digital melt pressure indicator.

<< Learn More >> << Another OneHalf20 Product >>


 

Celesco Low Cost Stringpot

The SP3 from Celesco is a compact, economical stringpot that provides a user selectable 4-20 mA or 0-10 Vdc output signal. Simply install this sensor using the handy mounting bracket and connect the appropriate wires for the desired ouput.

The SP3 is constructed with a rugged, water resistant polycarbonate body that has been compactly designed for tight spaces and generous measuring cable misalignment. With 4 different ranges, the SP3 is a perfect solution for many applications from light industrial to OEM. Just like all of our other SP and SE models, the SP3 is in stock ready to ship.

<< Learn More >> << Another Intertechnology Product >>


 

Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>