May 2, 2017

www.process-news.com

Process News Products | Process Newletter Library | View Newsletter Online

Explosion Proof 2-Wire Temperature Transmitter FuzyPro 8080TR

The FUZYPRO 8080TR is a Digital, PC programmable, galvanicaly isolated explosion proof universal input 2-wire smart temperature transmitter. The explosion proof universal input 2-wire smart temperature transmitter FuzyPro 8080TR converts 13 types of thermocouple sensors; 12 types of RTD sensors, configured as 2, 3 and 4 wires; potentiometer, resistor and millivolt inputs into process current loop. A 24 bit A/D converter is the heart of this outstanding performance.

The FUZYPRO 8080TR Universal input Smart transmitters are designed for use in process industries where vibration, inclement weather and corrosive atmospheres prevail. The electronics are enclosed in a copper-free epoxy coated Aluminum housing and for more aggressive environments, a SS316 housing is optionally available. The housings meet the requirements of NEMA 4X & IP68, and are also certified Explosion Proof by FM/CSA/ATEX/IECEx.

<< Learn More >> << Another HCS Product >>


 

TTFM 1.0 Transit Time Ultrasonic Flowmeter

Accurately measure the flow rate of clean, non-aerated liquids like water, chemicals, and oils in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display along with totalizer and signal strength. Use the built-in control relays for flow alarms or flow proportionate pulse. Connect the isolated 4-20mA output to PLC's or controllers.

The TTFM 1.0 works on a wide range of pipe sizes and materials including carbon steel, stainless steel, ductile iron, cast iron, PVC, PVDF, fiberglass, copper, brass, aluminum and pipes with bonded liners including epoxy, rubber and Teflon.


 

EJ Series Metering Pumps From Walchem Corporation

The EJ Series provide precise chemical injection at an economical price. Universal voltage capability enables operation from 100 - 240VAC in virtually all countries. The EJ Series are compact, simple to operate and have outputs to 1.3 GPH (4.8 LPH) and a maximum pressure of 175 PSI (1.2 MPa).

  • High Speed Performance
    The EJ Series operate at 360 strokes-per-minute, providing high resolution chemical feed and high turndown capability. Most competitive products operate at slower speeds, resulting in slug feeding, accelerated diaphragm wear and poor feed control.

  • Universal Voltage
    The Universal Voltage Function enables the EJ Series to operate at any AC voltage. The EJ Series also conform to global Standards.

  • External Control
    The EJ Series have both digital input and Stop/Start inputs built into the pump, enabling either proportional or On/Off control.

  • IP65 Equivalent Protection
    A robust housing protects the pump from normal wear. Mounting the Digital Display and Key Pad control within the drive housing creates a highly water resistant design. A clear cover further protects the pump from liquids.

 

March Pumpen Magnetic Driven Gear Pump Type: MP/MPA

Features

  • Leak-free
  • Ideal for metering applications
  • Self-lubricating hydraulic parts
  • High discharge pressure
  • Low flow
  • Rugged design
  • Corrosion resistant
  • Self-priming
  • Dry running able ( only MPA )
  • Close coupled, compact design
  • Nearby pulsation free flow
  • Ideal for use with frequency inverter
  • Can handle low viscosity liquids

<< Learn More >> << More Vissers Sales Products >>


 

Top Valve Back Pressure & Pressure Relief Valves Now Certified to NSF-61

Primary Fluid Systems Inc. has recently attained certification for its Top Valve brand of back pressure and pressure-relief valves. Available in various sizes, connections, and materials, Top Valve can be customized to systems’ needs. Top Valve is also available in high temperature and high pressure models.

NSF/ANSI-61 ensures the quality and material of products which come in contact with drinking water. It ensures that the product meets all regulatory requirements for the USA and Canada.

Primary Fluid Systems is anticipating approval for its remaining product lines.

<< Learn More >> << Another Primary Fluid Systems Inc Product >>


 

Weatherproof Alarm & Overfill Protection Device

The Model AL201 is ULC listed: CAN/ULC-S661-10 Standard for Overfill Protection Devices for Flammable and Combustible Liquid Storage Tanks AL201 is a family of alarm panels with provision for one to ten inputs and optional relay outputs.

The panel must be mounted in a non-hazardous location. The white pilot light indicates the 120 VAC power. A red pilot light provides the visual alarm indication for each alarm contact. The red light remains on until the alarm condition is corrected. The alarm circuit resets automatically.


 

NaK Filled Melt Pressure Transducers

The RTNAK6S NaK Filled Melt Pressure Transducer is designed specifically for food, packaging and medical processing applications. The Model RTNAK uses a special high temperature fill (NaK, potassium sodium) and an Inconel diaphragm to allow for pressure measurement in applications with process temperatures up to 1,000ºF. The unit features the industry standard 3.33 mV/Volt output and offers pin-to-pin compatibility with all competitor's models utilizing the Bendix style 6 pin bayonet connector.

The RTNAK6S NaK Filled Melt Pressure Transducer comes standard with a 6" rigid stem, and 1/2-20 UNF thread for mounting in standard transducer mounting holes.

<< Learn More >> << Another OneHalf20 Product >>


 

Classic Wind Speed Transmitter

The low-inertia light metallic cup star and opto-electronic pick-up combine to give a starting threshold of only 0.3 m/sec (0.7 mph). An electronically regulated heating system keeps the ball bearings and rotating parts frost and ice free down to -35°C (-31°F). The instrument is rated for 60 m/sec (135 mph) and 85°C (185°F). The Classic is ideal for process plants required to measure wind conditions. Standard analog outputs connect easily to data aquisition systems.

Our compact wind transmitters have the perfect price performance ratio for most commercial and industrial applications. Their built-in heaters make them serviceable in winter conditions and their standard 4-20mA output signal makes them simple to interface to building control panels or industrial chart recorders.


 

Melt Pressure Gauge

The ONEhalf20 CTG6S Melt Pressure Gauge is the ideal choice for extrusion processors requiring a simple, reliable and accurate maintenance free melt pressure measurement. This rugged, totally self-contained Melt Pressure Gauge is available in either 0-5,000 psi or 0-10,000 psi ranges. This Melt Pressure Gauge allows the user to benefit from the improved efficiency and quality that goes along with melt pressure measurement at an affordable price.

The ONEhalf20 Melt Pressure Gauge Model CTG6S also offers the advantage of providing the industry standard 3.33 mv/Volt output utilizing the Bendix style 6 pin bayonet connector. This output enables the user to also connect this gauge to a remote panel mount digital melt pressure indicator.

<< Learn More >> << Another OneHalf20 Product >>


 

OEM Application Cable Extension Position Transducer

The Celesco PTX101 is a low cost, compact and easy-to-use cable extension transducer. It is available with full-scale measurement ranges from 2 to 100 inches. The Celesco PTX101 provides a voltage feedback signal that is proportional to the linear movement of a traveling stainless-steel extension cable.

Simply mount the body of the transducer to a fixed surface and attach the extension cable to the moving object. The Celesco PTX101 is recommended for applications where space and money is limited.

<< Learn More >> << Another Intertechnology Product >>