July 11, 2017

www.process-news.com

Process News Products | Process Newletter Library | View Newsletter Online

Industrial Thermocouples & RTD Assemblies

The Industrial Thermocouples and RTD Assemblies are manufactured using high quality contamination and chemical resistant mineral insulated RTD and thermocouple cable. Industrial Thermocouples and RTD Assemblies have higher temperature capabilities up to (3000ºF) and insure trouble free operation where with minimum failure. Industrial Thermocouples and RTD Assemblies can be manufactured with a single sensor, dual or multipoint sensors and in various diameters from .010" to 1.125" in diameter with a large variety of termination's like explosion proof heads, FDA (food) Terminal Head or with leads and plugs. Most designs can be made for more information consult HCS.

>> Learn More << << Another HCS Product >>


 

TTFM 1.0 Transit Time Ultrasonic Flowmeter

Accurately measure the flow rate of clean, non-aerated liquids like water, chemicals, and oils in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display along with totalizer and signal strength. Use the built-in control relays for flow alarms or flow proportionate pulse. Connect the isolated 4-20mA output to PLC's or controllers.

The TTFM 1.0 works on a wide range of pipe sizes and materials including carbon steel, stainless steel, ductile iron, cast iron, PVC, PVDF, fiberglass, copper, brass, aluminum and pipes with bonded liners including epoxy, rubber and Teflon.


 

EJ Series Metering Pumps From Walchem Corporation

The EJ Series provide precise chemical injection at an economical price. Universal voltage capability enables operation from 100 - 240VAC in virtually all countries. The EJ Series are compact, simple to operate and have outputs to 1.3 GPH (4.8 LPH) and a maximum pressure of 175 PSI (1.2 MPa).

  • High Speed Performance
    The EJ Series operate at 360 strokes-per-minute, providing high resolution chemical feed and high turndown capability. Most competitive products operate at slower speeds, resulting in slug feeding, accelerated diaphragm wear and poor feed control.

  • Universal Voltage
    The Universal Voltage Function enables the EJ Series to operate at any AC voltage. The EJ Series also conform to global Standards.

  • External Control
    The EJ Series have both digital input and Stop/Start inputs built into the pump, enabling either proportional or On/Off control.

 

Self Priming Magnetic Drive Sealless Centrifugal Pumps from Sethco

The Sethco magnetic drive, self priming pumps feature Kynar® (PVDF) construction for use in corrosive liquid applications.

Priming the pump is easy. The operator simply fills the priming chamber with the liquid to be pumped and turns the pump on. Other features include the ability to run dry after initial priming, easy to disassemble design and an internal basket strainer to prevent foreign objects from entering pump.

Corrosion resistant, the pump is recommended for acids, alkalies, caustics, sea water, solvents and many other difficult applications.

<< Learn More >> << More Vissers Sales Products >>


 

ACCUDRAW PVC Calibration Cylinders Now Certified to NSF-61

Primary Fluid Systems Inc. has recently attained certification for its Accudraw PVC calibration cylinders. Available in a variety of sizes and connections, Accudraw cylinders can be customized to systems’ needs. Accudraw Calibration Cylinders were developed for the accurate calibration of metering pumps.

NSF/ANSI-61 ensures the quality and material of products which come in contact with drinking water. It ensures that the product meets all regulatory requirements for the USA and Canada.

<< Learn More >> << Another Primary Fluid Systems Inc Product >>


 

Ramsey™ Oretronic III Tramp Metal Detector

Tramp metal can stop your operation and the damage it can cause to equipment can be expensive. That's why conscientious operators and owners consider tramp metal detectors to be an essential part of their operation. The Thermo Scientific Ramsey Oretronic III Tramp Metal Detector provides an economical and reliable means to protect expensive crushers, conveyors and other process equipment from damage by tramp metal.

Protect expensive crushers, conveyors and other process equipment from damage by tramp metal using the Thermo Scientific™ Ramsey™ Oretronic III Tramp Metal Detector. Offering economically reliable metal detection, the Ramsey Oretronic III Tramp Metal Detector is able to detect all types of metallic scrap including bucket teeth, manganese steel mantles, bore crowns, bar scrap, chains and tools.


 

NaK Filled Melt Pressure Transducers

The RTNAK6S NaK Filled Melt Pressure Transducer is designed specifically for food, packaging and medical processing applications. The Model RTNAK uses a special high temperature fill (NaK, potassium sodium) and an Inconel diaphragm to allow for pressure measurement in applications with process temperatures up to 1,000ºF. The unit features the industry standard 3.33 mV/Volt output and offers pin-to-pin compatibility with all competitor's models utilizing the Bendix style 6 pin bayonet connector.

The RTNAK6S NaK Filled Melt Pressure Transducer comes standard with a 6" rigid stem, and 1/2-20 UNF thread for mounting in standard transducer mounting holes.

<< Learn More >> << Another OneHalf20 Product >>


 

Stainless Steel Pressure Transmitters

Low cost stainless steel pressure transmitters Model PX61 features compact construction, an integral amplifier, 2-wire 4-20mA output signal and extensive medium compatablility.

The design provides a 1/2% accurate, low cost pressure transmitter that can operate over a wide temperature range with corrosion resistance.

Models are available from stock in both standard and refrigerant models.

Stainless Steel Pressure Transmitters Model PX61 determines the pressures in liquids and gases and convert these pressures to an electrical signal. The ceramic diaphragm sensing element deflects under pressure. The mechanical deformation is converted to an electrical signal by means of a DMS-bridge. An electronic system converts the DMS-signals to a standard 4-20 mA signal.

<< Learn More >> << Another Enercorp Product >>


 

Melt Pressure Gauge

The ONEhalf20 CTG6S Melt Pressure Gauge is the ideal choice for extrusion processors requiring a simple, reliable and accurate maintenance free melt pressure measurement. This rugged, totally self-contained Melt Pressure Gauge is available in either 0-5,000 psi or 0-10,000 psi ranges. This Melt Pressure Gauge allows the user to benefit from the improved efficiency and quality that goes along with melt pressure measurement at an affordable price.

The ONEhalf20 Melt Pressure Gauge Model CTG6S also offers the advantage of providing the industry standard 3.33 mv/Volt output utilizing the Bendix style 6 pin bayonet connector. This output enables the user to also connect this gauge to a remote panel mount digital melt pressure indicator.

<< Learn More >> << Another OneHalf20 Product >>


 

Nova-Pro 300 and Nova-Pro 500 LED Stroboscopes / Laser Tachometers

Nova-Pro is a series of powerful portable visual inspection and speed measurement tools. We have combined the features of our hand held LED stroboscopes together with a full function laser tachometer to create a compact, ergonomic and extremely powerful two in one predictive maintenance tool.

The stroboscope light source is made up of twelve LED's which are extraordinarily bright yet extremely efficient allowing cool continuous operation and extremely long battery life (up to 19 hours on a single charge). Continuous operation is also possible with the optional AC adapter.

<< Learn More >> << Another Access Controls Product >>


 

Stress Analysis Strain Gages

Bondable foil strain gages (strain gauges) available in thousands of possible pattern designs and combinations of grid alloys, backing materials, resistances, and options.



Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>